Search found 420 matches
- Tue Nov 20, 2018 9:56 pm
- Forum: K-Pro / KManager
- Topic: 1992 EG k20a2 swap No Start - HELP!!!
- Replies: 14
- Views: 7174
Re: 1992 EG k20a2 swap No Start - HELP!!!
Enter the deadtimes here in Kmanager at 43.5psi base on grams deadtimes.
- Tue Nov 20, 2018 9:50 pm
- Forum: K-Pro / KManager
- Topic: 1992 EG k20a2 swap No Start - HELP!!!
- Replies: 14
- Views: 7174
Re: 1992 EG k20a2 swap No Start - HELP!!!
Here is the deadtimes for the Grams 550cc injector
- Tue Nov 20, 2018 3:05 pm
- Forum: K-Pro / KManager
- Topic: 1992 EG k20a2 swap No Start - HELP!!!
- Replies: 14
- Views: 7174
Re: 1992 EG k20a2 swap No Start - HELP!!!
Did you enter the deadtime for the injectors?
- Wed Nov 14, 2018 6:48 am
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
Re: Innovate LC1 wideband setup
Any followup information on this issue.
- Mon Nov 12, 2018 11:36 am
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
Re: Innovate LC1 wideband setup
Any update on this problem
- Fri Nov 09, 2018 6:15 pm
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
Re: Innovate LC1 wideband setup
Tried connecting LC1 12v source directly to the battery but no change
- Fri Nov 09, 2018 5:11 pm
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
Re: Innovate LC1 wideband setup
I will try and then report
- Fri Nov 09, 2018 4:01 pm
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
Re: Innovate LC1 wideband setup
Innovate LC1 wiring
Red wire 12v is supplied by a relay which is connected to the battery
Blue and the white wires are connected to the same ground as the ECU on valve cover stud
Brown wire is connected to the analog 3 input on kpro
Red wire 12v is supplied by a relay which is connected to the battery
Blue and the white wires are connected to the same ground as the ECU on valve cover stud
Brown wire is connected to the analog 3 input on kpro
- Fri Nov 09, 2018 11:39 am
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
Re: Innovate LC1 wideband setup
So my question once again should the analog and the A/F both match base on the screen shot in the above post?
- Thu Nov 08, 2018 3:15 pm
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
Re: Innovate LC1 wideband setup
I tried using the offset but that just throws off my close loop operation. Let my better demonstrate Look at the A/F reading 0.67 Look at the Analog 3 reading 1.00 Look at the Logworks reading 0.98 The analog and Logworks are pretty much well matched at 0 offset, it's the A/F reading that's not matc...
- Thu Nov 08, 2018 2:22 pm
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
Re: Innovate LC1 wideband setup
I will try using the offset and tell you the outcome
- Thu Nov 08, 2018 2:11 pm
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
- Thu Nov 08, 2018 11:58 am
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
Re: Innovate LC1 wideband setup
It my first time using kpro, can someone tell me if the analog and A/F reading should read the same if using a analog input for the external wideband
- Thu Nov 08, 2018 10:53 am
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
Re: Innovate LC1 wideband setup
I meant data
- Wed Nov 07, 2018 9:29 pm
- Forum: K-Pro / KManager
- Topic: Innovate LC1 wideband setup
- Replies: 42
- Views: 21344
Re: Innovate LC1 wideband setup
The offset was left at 0 with the LC2 conversion, I'm thinking maybe there is something wrong with the LC1 conversion date