Search found 22596 matches

by Spunkster
Wed Mar 20, 2024 1:50 pm
Forum: S300 Calibrations
Topic: D15B7 calibration
Replies: 3
Views: 57

Re: D15B7 calibration

You could try it.
by Spunkster
Wed Mar 20, 2024 9:46 am
Forum: S300 Calibrations
Topic: D15B7 calibration
Replies: 3
Views: 57

Re: D15B7 calibration

I would recommend that you try to get the unlocked calibration from whoever tuned it. If you cannot, then you will need to start with a new calibration and properly tune it.
by Spunkster
Wed Mar 20, 2024 9:43 am
Forum: s300 / SManager
Topic: Bad idle switching over to hondata
Replies: 1
Views: 104

Re: Bad idle switching over to hondata

With the idle controller unplugged, what RPM does it idle at?
by Spunkster
Wed Mar 20, 2024 9:42 am
Forum: K-Pro / KManager
Topic: VCC3 for 5 volt reference
Replies: 3
Views: 258

Re: VCC3 for 5 volt reference

The version 1 K-Pro does not have any additional inputs like the version 4 does.
by Spunkster
Wed Mar 20, 2024 9:41 am
Forum: FlashPro Manager
Topic: 2011 acura rdx to a 2024 integra aspec
Replies: 2
Views: 62

Re: 2011 acura rdx to a 2024 integra aspec

I'm sorry, but that FlashPro cannot be used on an Integra. You will have to purchase the correct FlashPro for the new vehicle.
by Spunkster
Tue Mar 19, 2024 11:04 am
Forum: s300 / SManager
Topic: CAN information from S300
Replies: 4
Views: 92

Re: CAN information from S300

Details on the CAN output can be found in the help file at: https://hondata.com/help/smanager/can_output.htm
by Spunkster
Tue Mar 19, 2024 11:00 am
Forum: Civic Si 2006-2011 Americas
Topic: basemaps won't start
Replies: 5
Views: 152

Re: basemaps won't start

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
by Spunkster
Tue Mar 19, 2024 10:58 am
Forum: K-Pro / KManager
Topic: PNF US Ep3 Reverse Lockout
Replies: 1
Views: 60

Re: PNF US Ep3 Reverse Lockout

The PNF ECU does not have an output that will work with this.
by Spunkster
Tue Mar 19, 2024 10:56 am
Forum: s300 / SManager
Topic: starter issue 98 integra
Replies: 1
Views: 84

Re: starter issue 98 integra

It sounds like there is most likely a wiring issue that needs to be addressed.
by Spunkster
Mon Mar 18, 2024 11:36 am
Forum: FlashPro Calibrations
Topic: basemap download help for a newbie!
Replies: 2
Views: 90

Re: basemap download help for a newbie!

Close all instances of FlashPro manager running and the only open one copy.
by Spunkster
Mon Mar 18, 2024 11:29 am
Forum: K-Pro / KManager
Topic: VCC3 for 5 volt reference
Replies: 3
Views: 258

Re: VCC3 for 5 volt reference

I would recommend tapping the wire.

This cannot be done on the v1 s300.
by Spunkster
Mon Mar 18, 2024 11:27 am
Forum: s300 / SManager
Topic: Upload botton grayed out can't upload
Replies: 1
Views: 119

Re: Upload botton grayed out can't upload

There appears to be a jumper on J12 and it must be removed.
by Spunkster
Fri Mar 15, 2024 4:14 pm
Forum: FlashPro Manager
Topic: Switching from ktuner
Replies: 3
Views: 7983

Re: Switching from ktuner

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.

Post the FlashPro serial number here.
by Spunkster
Thu Mar 14, 2024 12:23 pm
Forum: FlashPro Calibrations
Topic: K24A swap ignition question
Replies: 1
Views: 118

Re: K24A swap ignition question

It should not matter which ones are used.
by Spunkster
Thu Mar 14, 2024 9:42 am
Forum: Civic Si 2012-2015 US/Canadian / 2013+ ILX
Topic: ECU "FORGETTING" FLASH
Replies: 3
Views: 244

Re: ECU "FORGETTING" FLASH

answered via email