Search found 102 matches

by engjoo
Sun Jul 04, 2010 5:04 pm
Forum: FlashPro Manager
Topic: Read Protect - how to undo ?
Replies: 8
Views: 3610

OK. I tried various ways and found the following: If you have only ONE cal in EITHER primary and secondary, it work as you intended. If you have TWO cal in BOTH primary and secondary, you cannot undo the read protect by uploading another cal. The way to get it work under this scenario is to DELETE B...
by engjoo
Fri Jul 02, 2010 11:56 am
Forum: FlashPro Manager
Topic: Read Protect - how to undo ?
Replies: 8
Views: 3610

Spunkster wrote:It is working exactly as designed. Once you upload any calibration to the flashpro it removes the read protection.
Tried it on two different PC and various cals. It is still Read Protected. You have mail.
by engjoo
Fri Jul 02, 2010 10:43 am
Forum: FlashPro Manager
Topic: Read Protect - how to undo ?
Replies: 8
Views: 3610

Spunkster wrote:You must upload to the flashpro using the laptop and it will overwrite it.
That is what I did:

Notebook -> Flashpro

Could it be a firmware bug with the flashpro unit ?
by engjoo
Fri Jul 02, 2010 10:02 am
Forum: FlashPro Manager
Topic: Read Protect - how to undo ?
Replies: 8
Views: 3610

Spunkster wrote:You have to upload the calibration again.

No. Uploading a new (same name or otherwise, primary or/and secondary) cal does not work.

Currently on v 1.1.5.6
by engjoo
Fri Jul 02, 2010 9:16 am
Forum: FlashPro Manager
Topic: Read Protect - how to undo ?
Replies: 8
Views: 3610

Read Protect - how to undo ?

I have enabled Read Protect on my flash pro. How do I undo it ?
by engjoo
Mon Jun 28, 2010 5:40 pm
Forum: FlashPro Manager
Topic: Knock retard vs knock count?
Replies: 2
Views: 1812

Re: Knock retard vs knock count?

I know that the values in the knock sensitivity table will not change the knock count. If that is the case, what does it (knock tables) do ? Does it affect knock retard? How does the ECU determine the knock retard? this topic has been discussed before. look up in this forum regarding the relation o...
by engjoo
Mon Jun 28, 2010 9:16 am
Forum: Civic Type R 2007-2011 European FN2
Topic: Reverting ECU back to standard
Replies: 5
Views: 3658

Re: Reverting ECU back to standard

HI Guys I need your help! I am currently running my flash pro with the Hondata Group N ECU, if I unlock the flashpro from that ECU will it go back to the normal Group N ecu or will it be wasted?? Anyhelp would be great. It will go back to USDM Civic Si map as that ECU is an USDM Civic Si. Hondata F...
by engjoo
Sat Jun 26, 2010 9:36 pm
Forum: FlashPro Manager
Topic: Knock retard vs knock count?
Replies: 2
Views: 1812

Knock retard vs knock count?

I know that the values in the knock sensitivity table will not change the knock count. If that is the case, what does it (knock tables) do ?

Does it affect knock retard? How does the ECU determine the knock retard?
by engjoo
Fri Jun 25, 2010 3:05 pm
Forum: FlashPro Manager
Topic: Additional fields for the datalog files?
Replies: 0
Views: 1195

Additional fields for the datalog files?

Is it possible to include the file name of the last calibration uploaded to the datalog files?
by engjoo
Thu Jun 24, 2010 8:17 am
Forum: Civic Type R 2006-2010 Japanese FD2
Topic: knock tables values changing.
Replies: 30
Views: 18407

knock values decreasing with each save!

Did an experiment and there is indeed a problem with the knock table values decreasing. I am using 1.1.5.6 now. What I did in this experiment is as follows: 1) Load new cal. Select FD2 Stock Equivalent. Save cal as stock.fpcal. Note value of knock low - 0 degrees @ 500rpm/Col 10 = 740 2) Re-open sto...
by engjoo
Thu Jun 24, 2010 8:01 am
Forum: Civic Type R 2006-2010 Japanese FD2
Topic: knock tables values changing.
Replies: 30
Views: 18407

There is an easier way to do this. You may right click on the table and import from another previously saved calibration (eg Honda reflashed). Thats what i did, however it ask whether wanna load the table index, i am not too sure which to click, thus i click "no". However do note that will need to ...
by engjoo
Wed Jun 23, 2010 10:13 pm
Forum: Civic Type R 2006-2010 Japanese FD2
Topic: knock tables values changing.
Replies: 30
Views: 18407

Nope, mine is year end 2007, the issue I find is that everytime u open the calibration in the program, certain portions of the knock tables will reduce by itself, so if I were to edit my calibrations 10 time, the knock tables will be reduced quite a lot. Nowadays I have to copy and past the knock t...
by engjoo
Tue Jun 22, 2010 4:59 pm
Forum: Civic Type R 2006-2010 Japanese FD2
Topic: knock tables values changing.
Replies: 30
Views: 18407

What knock tables are you guys using ? I am still tweaking with different MAP based calibration for FD2. I noticed different tuners may adjust their knock tables differently. Shouldn't they be the same ? Hi bro, i am using the default JDM hondata reflash knock table. Never adjust it before. OK. I a...
by engjoo
Mon Jun 21, 2010 3:13 pm
Forum: FlashPro Manager
Topic: Knock tables
Replies: 0
Views: 1324

Knock tables

How are the knock tables derived?

Should they be the same if the engine are the same ? Isn't adjusting the knock tables same as "cheating" the ECU ?
by engjoo
Mon Jun 21, 2010 2:43 pm
Forum: Civic Type R 2006-2010 Japanese FD2
Topic: knock tables values changing.
Replies: 30
Views: 18407

What knock tables are you guys using ?

I am still tweaking with different MAP based calibration for FD2.

I noticed different tuners may adjust their knock tables differently. Shouldn't they be the same ?