Hondata

Russian town called Magadan, if this can help :)

Spunkster wrote:Trying to convert to a manual transmssion will be a lot of trouble. You will be better off selling the car and just purchasing a manual car to begin with.

You see in my location yours solution will be more problem than tranny swap :)

Hello, i own 2004 tsx at kpro dual harness. I exam the possibility of swap at to mt. My dual harness tsx ecu is AT one, if there will be no AT how it will work? I know that rsx ecu is an MT one and he is controlling the engine. Wil it tsx at ecu MIL, or there is a way to shut it up? Cause there will...

If i`ll have a key and the immo from that car, from wich ECU was taken to buid dual harness.
Can this help solving the situation ?

O.k.

is there a way to enable immo ?

So if i understand you correctly there is no way for me to enable immo on my car ?
And what shoud i do with a flashing bulb ?

You mean at all ? But i can enable immo thrue K-manager, there is an option ... and what about http://www.hondata.com/immobilizer.html for what is this manual ???

Number on a blue box is 2608 or 7608 :)

Spunkster wrote:Do you have a dual adapter harness?

Yes.

Spunkster wrote:Are you using the stock ECU from your vehicle still?

No. The stock ECU is in a table box now, but it can installed back if i`ll sell a car (cause i will sell it without dual harness).

According to http://www.hondata.com/immobilizer.html Acura Technician types your car's VIN number into their desktop PC connected to Honda The desktop PC returns a code which allows the immobilizer to be reprogrammed for your VIN number. What VIN is typed ? From my old ECU that lies in a box now :),...

Hello, i have a Kmanager 1.3.9.0, my friend owns a 1.3.5.4. I asked him to look thrue my calibration and make some corrections. He done it and send me calibration, but after i resave it it looses data after dot (see the attach file). But if i use the compare feature of Kmanager it shows no differenc...

kb58, thank you! Now i`am sure that my O2 sensor is o.k..

I measured about 1 ohm when cold, but it goes up quickly as it gets hot. Ou. So it seems that my a/f sensor is o.k., cause i have a new one and measured the resistance in a room temperature, and it is 1ohm.... Said another way, it does not draw 12V / 1 ohm - 12 amps! I can not figure out what do yo...

Do anyone knows which reistance of heater is on oem wideband a/f sensor ?
On non wideband it is 2.1-2.9 Ohm, if some one have a working oem wideband a/f sensor, measure the resistance between black wires.

RSX one wires are just shorter it is not a problem at all.