Search found 501 matches

by DaX
Wed Jul 13, 2005 8:45 am
Forum: Applications
Topic: Hondata S300
Replies: 27
Views: 11262

big thumbs up to you guys @ hondata on the s300! you really make a big move for the obd1 guys with this new system (usb and no burning chips esp.). :D I just bought an s2b not long ago but am glad to read here you will be offering romeditor v4 with iat and gear correction!!!! woot!!!! thinking abou...
by DaX
Mon Jul 11, 2005 6:41 am
Forum: s100/s200
Topic: start up
Replies: 2
Views: 1974

Have you tried unplugging your EVAP purge solenoid?
by DaX
Mon Jul 11, 2005 6:35 am
Forum: Applications
Topic: 94 Del Sol Si about to get a complete b18b swap 91 Integera
Replies: 1
Views: 1470

I'm using a B18A1 from a 91 Integra LS in my 92 Civic...very similar setup.

You can use the S200, but will need to convert to OBD-1. I recommend retaining your Del Sol's engine wiring harness and using it on the LS engine. You'll need a 94+ Integra LS distributor.
by DaX
Wed Jul 06, 2005 5:29 am
Forum: s100/s200
Topic: old staged system question
Replies: 1
Views: 1168

Here's the upgrade guide:

http://www.hondata.com/v3upgrades.html
by DaX
Wed Jul 06, 2005 5:27 am
Forum: s100/s200
Topic: Different AFR with A/C
Replies: 3
Views: 1772

Are you using shielded wire for your o2 signal? Could be interference...
by DaX
Wed Jul 06, 2005 5:26 am
Forum: Applications
Topic: plx m300 datalog question
Replies: 17
Views: 7820

The Honda ECU can only understand narrowband input [unless it's a P07 or other ECU designed for wideband input]. The benefits of running in closed loop are better gas mileage...as Spunkster said you still get to see true wideband values from the sensor on your PLX device, but from the box, the signa...
by DaX
Tue Jul 05, 2005 2:07 am
Forum: Non-Hondata
Topic: Cost?
Replies: 1
Views: 1372

http://www.moates.net/product_info.php? ... ucts_id=42

$15 from Moates.net for everything you'll need...or you can buy the components individually if you don't need all of that stuff.
by DaX
Tue Jul 05, 2005 2:05 am
Forum: s100/s200
Topic: can i do this
Replies: 7
Views: 2604

Essentially, the ostrich is a romulator. You can use it to tune on the fly, but you will also need to buy a ROM burner so that you can burn your final map to a 29C256 to leave in the ECU.
by DaX
Tue Jul 05, 2005 2:02 am
Forum: s100/s200
Topic: HELP >>eclipse INJECTORS....will they fit? and HOW...
Replies: 1
Views: 939

Are you talking about blue top DSM 450's?

You may have to bore out the injector seal that goes into the IM a little with a dremel tool.
by DaX
Sun Jul 03, 2005 7:10 am
Forum: s100/s200
Topic: Need some opinions
Replies: 4
Views: 1568

First you need to determine what you have, what you want, and how much money you're willing to spend to get it.

Are you OBD-0, OBD-1, OBD-2, or K-series?
by DaX
Sun Jul 03, 2005 7:07 am
Forum: Applications
Topic: Hondata S300
Replies: 27
Views: 11262

What magazine/article? Where can I see this stuff?
by DaX
Tue Jun 28, 2005 9:23 am
Forum: s100/s200
Topic: 1000 cc RC low impetence injectors
Replies: 14
Views: 5312

turbo_civic_si wrote:what? nobody goes through hondata's website???

http://www.hondata.com/techlowohminjectors.html

come on now. :) that was a good write up and video.
nice. never knew that existed!
by DaX
Mon Jun 27, 2005 6:21 am
Forum: s100/s200
Topic: 1000 cc RC low impetence injectors
Replies: 14
Views: 5312

The inline resistors lower the current the injector drivers see. The resistor box should be used with low impedance injectors, and not used with high impedance injectors. I think you can burn up your injector drivers by overheating them [too much current] if you don't use the resistors. If you can't...
by DaX
Sun Jun 26, 2005 2:47 pm
Forum: s100/s200
Topic: 1000 cc RC low impetence injectors
Replies: 14
Views: 5312

I have done a fairly detailed writeup [minus photos] on the Honda-Tech.com knowledge base for wiring in a resistor box with plugs, so that it can be installed or removed in seconds.
by DaX
Wed Jun 22, 2005 6:10 am
Forum: s100/s200
Topic: Hondata Log - Knock Sensor
Replies: 6
Views: 2692

When extending the wires, did you use a shielded wire for the o2 signal?