Search found 24 matches

by 1320k24EK
Thu Jan 02, 2014 3:20 pm
Forum: K-Pro / KManager
Topic: K24a2 VTC cam and camcmd read 0
Replies: 18
Views: 7646

Re: K24a2 VTC cam and camcmd read 0

Attached are a few pics like you asked. If you need more pics or if the quality isn't good enough, just let me know and I'll go digging for my better camera. Also, the shop that I buy all my parts from offered to lend me an ECU with kpro version 3 so I'll be picking that up saturday and giving it a ...
by 1320k24EK
Sat Dec 28, 2013 2:54 pm
Forum: K-Pro / KManager
Topic: K24a2 VTC cam and camcmd read 0
Replies: 18
Views: 7646

Re: K24a2 VTC cam and camcmd read 0

I've attached another datalog of my k24a2 just revving it a bit in the garage. Speaking to my tuner, he advised I try bending the pins just a tad on b1 and b23. I did so and it didn't make a difference. It would be great if someone would chime in and let me know what to do next. I've been in contact...
by 1320k24EK
Sat Dec 28, 2013 11:10 am
Forum: K-Pro / KManager
Topic: VTC doesnt work on K20A2 with Hondata PRB ecu DTC P0011
Replies: 7
Views: 5769

Re: VTC doesnt work on K20A2 with Hondata PRB ecu DTC P0011

Have you tried anything since you found out it was your ECU?
by 1320k24EK
Wed Dec 25, 2013 4:16 pm
Forum: K-Pro / KManager
Topic: K24a2 VTC cam and camcmd read 0
Replies: 18
Views: 7646

Re: K24a2 VTC cam and camcmd read 0

Any suggestions? If I need a new ECU, do I ask for another PRB? Anything in particular I should look for? Will my kpro simply plug into another PRB ECU without modification besides the USB port? I noticed on the bottom of the kpro chip that there are 4 places where it connects to the ECU while only ...
by 1320k24EK
Tue Dec 24, 2013 4:57 am
Forum: K-Pro / KManager
Topic: K24a2 VTC cam and camcmd read 0
Replies: 18
Views: 7646

Re: K24a2 VTC cam and camcmd read 0

I think it's a problem with the combination of parts you have. You seem to be using a 06 engine with a 06 VTC solenoid but with the earlier wiring harness from the K20A2 and the PRB ecu. There seems to be two combinations of wiring harness, solenoid and ECU that works. 2002-2005 ECU B1 S+ Pin 1 ECU...
by 1320k24EK
Mon Dec 23, 2013 5:35 pm
Forum: K-Pro / KManager
Topic: K24a2 VTC cam and camcmd read 0
Replies: 18
Views: 7646

Re: K24a2 VTC cam and camcmd read 0

** UPDATE ** Ok, I was able to try my ecu in a 2002 rsx-s. It was a friend of a friend and he was a little hesitant in letting me try it so only he was in the drivers seat. I uploaded the stock k20a2 cal and first it wouldn't start. It would just keep on turning over. He mentioned the immobilizer, s...
by 1320k24EK
Wed Dec 18, 2013 4:57 pm
Forum: K-Pro / KManager
Topic: K24a2 VTC cam and camcmd read 0
Replies: 18
Views: 7646

Re: K24a2 VTC cam and camcmd read 0

Which vehicles will the PRB ECU directly plug into? Is it just the 02-04 RSX base and type S? I'm asking around on a local forum if anyone would be willing to let me try out my ECU in their car. I will also be ordering a PNC VTC solenoid from Honda after Christmas. I will update with the results. Th...
by 1320k24EK
Wed Dec 18, 2013 10:47 am
Forum: K-Pro / KManager
Topic: K24a2 VTC cam and camcmd read 0
Replies: 18
Views: 7646

Re: K24a2 VTC cam and camcmd read 0

Have you tried the ECU in a known working vehicle? No I haven't. Unfortunately, I don't know anyone that has a car I could try it in. I've even emailed ppl selling their cars privately if I could try it out but nobody is willing to do so. What the both of you mentioned is what my plans were to try ...
by 1320k24EK
Tue Dec 17, 2013 8:01 pm
Forum: K-Pro / KManager
Topic: K24a2 VTC cam and camcmd read 0
Replies: 18
Views: 7646

K24a2 VTC cam and camcmd read 0

I apologize for the long write-up but I find every little piece of info should be mentioned. - what vehicle you have 2000 Honda Civic CX (Canadian car if that matters), 06 k24a2 with 04 rsx-s transmission. - serial number of your K-Pro 05005854 - ECU part number (starts with 37820) and serial number...