Search found 18771 matches

by Spunkster
Fri Jul 30, 2004 3:48 pm
Forum: Applications
Topic: programming stock ecu?
Replies: 1
Views: 1434

Hondata does not offer any products for OBD2 ecus. To use a Hondata system, you will have ot convert to an OBD1 ecu. I would suggest takign the car to someone familiar with engine swaps and they can diagnose the issue for you.
by Spunkster
Thu Jul 29, 2004 12:54 pm
Forum: K-Pro / KManager
Topic: Problem to download and upload program
Replies: 3
Views: 2498

Please go to the menu at the top and select ONLINE, then TOOLS, then click on CLEAR SECURITY. A warning may appear, go ahead and clear the security. Once you have done this, go ahead and upload the correct calibration and then you should be ready to go.
by Spunkster
Thu Jul 29, 2004 9:55 am
Forum: K-Pro / KManager
Topic: K-Manager - Verify Feature
Replies: 9
Views: 5356

It is not recommended to do any changes while driving the car. You may be able to make a small change while the engine is running, but again, THIS IS NOT RECOMMENDED.
by Spunkster
Thu Jul 29, 2004 9:52 am
Forum: K-Pro / KManager
Topic: Civic Type R 7PSI program
Replies: 6
Views: 3536

You will need to use the K20a2-civictyper-jrsc-550cc.kal. This is for 5 psi, and you will then have to tune the car for the additional boost that you will be running on the dyno.
by Spunkster
Tue Jul 27, 2004 4:01 pm
Forum: s100/s200
Topic: Need 99-00 Civic SI Stock bin.
Replies: 2
Views: 1731

Since this is an OBD2 ecu, no one will have this bin that you can use in a OBD1 ecu. If you are using a Hondata, you can have your dealer or tuner create a base map based off of one of the b16a ecus.
by Spunkster
Tue Jul 27, 2004 9:21 am
Forum: s100/s200
Topic: Hondata with ????
Replies: 4
Views: 2160

You will have to convert to a compatible OBD1 ecu from the list at http://www.hondata.com/ecus.html.
by Spunkster
Tue Jul 27, 2004 9:19 am
Forum: s100/s200
Topic: rpm issues
Replies: 4
Views: 1948

Is the check engine light on?
by Spunkster
Mon Jul 26, 2004 10:36 am
Forum: K-Pro / KManager
Topic: K-Manager - Verify Feature
Replies: 9
Views: 5356

If there are any errors when using the verify then you will need to close the software, reopen it , reload the calibration, then re-upload the file. Then verify the calibration to make sure there are no errors.
by Spunkster
Mon Jul 26, 2004 10:29 am
Forum: s100/s200
Topic: rpm issues
Replies: 4
Views: 1948

What error codes are you getting?
by Spunkster
Fri Jul 23, 2004 9:32 am
Forum: s100/s200
Topic: j1 jumper????
Replies: 1
Views: 1234

J1 is only a jumper.
by Spunkster
Fri Jul 23, 2004 9:30 am
Forum: s100/s200
Topic: New Install...Please Help
Replies: 6
Views: 2783

Use a multimeter and check the resistance of your injectors. Also provide the date you ordered the kit form Jackson Racing.
by Spunkster
Fri Jul 16, 2004 11:47 am
Forum: s100/s200
Topic: Big S200/Nitrous problem.
Replies: 2
Views: 1887

Have you checked to see if there is any fuel enrichment when all the parameters selected are met?
by Spunkster
Thu Jul 08, 2004 4:08 pm
Forum: Applications
Topic: Does an OBDII -> OBDI conversion break any emissions laws
Replies: 2
Views: 1933

Hondata products are for off road use
by Spunkster
Thu Jul 08, 2004 9:21 am
Forum: s100/s200
Topic: 2-Stage Rev Limiter - Can I use the stock clutch switch?
Replies: 7
Views: 3451

If you place battery voltage into the interface box, you will damage it.
by Spunkster
Tue Jul 06, 2004 4:50 pm
Forum: K-Pro / KManager
Topic: Error code 67-1 DTC P0420 Catalystic System Efficiency ...
Replies: 6
Views: 6125

This is normal as this is not an optioin when using this on a European car.