Hondata

Spunkster wrote:This is what people feel as rev-hang. Lowering the numbers will reduce the rev-hang.

Thank you

And, what is the overrun fuel cut delay exactly?

Can you import the fuel tables one by one to narrow down which is causing the problem? I have tried it, the fluctuations appears when I import the 25 degrees fuel table (high cam) base map 25 degrees fuel table.jpg Another test, I have a old calibration and its datalog, it was ok but, if I load thi...

Base map.

Base map + fuel tables

Well, I tried the same calibration but with FalshPro Manager 1.5.1 and everything remains as before. The engine grounds seems to be ok. Then I tried the base map calibration and works fine, no fluctuations. I think there is a problem with my calibration but I can´t discover it. It is always at WOT (...

Seems ok here (we can't test the exact calibration because we do not have an automatic). I would try FlashProManager version 1.5.0 and also check & clean your engine grounds, as some of the engine sensors are changing value at VTEC, which coincides with the odd behaviour. My car is manual. I will t...

Please, one more thing. Is it safe to use the car in these conditions?

Hondata wrote:Not normal. Seems to start at VTEC switch. We'll try the calibration in our car.

Thank you. I will wait for your answer. I discovered it in the last datalogs, some time ago there are not this fluctuations.

Why are fluctuations in the injection times? Is this normal?

I don´t understand. In FlashPro Manager help you say this: " the WOT tables specify the target lambda"
Is this correct for a CL9?

And, which is better, use MAP to determinate WOT or not use it?

Hondata wrote:We have not seen any difference between the logged lambda and actual lambda in the TSX; hence no correction.

Thanks.

Hondata, tell me something. Please.

As you can see, it shows the same value (AF and AF.Corr) in WOT operation.

How is the TSX O2 sensor accuracy? All my datalogs shows the same value in the AF sensor and the AF corrected sensor. The FlashPro Manager help, talk about "Civic Si lambda correction" and it say that the AF sensor and the Corrected AF sensor have to show differents values in certain conditions. Wha...

With factory ECU, FN2 final drive and yellow box to correct the speed, the control cruise works.

With 07 TSX ECU, FlashPro and yellow box, the control cruise still working

When I adjust the yellow box to correct the speed because TSX has different gear ratio than Accord, control cruise not work.