Search found 25 matches

by Adm_rsx
Sun Nov 11, 2012 8:16 pm
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12650

Re: Need help setting up

TC should not operate at such low rpm and loads as you are seeing. First I would check each wheel speed sensor by jacking the car up and spinning each wheel in turn. Next reset the cornering slip compensation in the traction control window to that of a RSX. Then do some slow driving and check that ...
by Adm_rsx
Mon Nov 05, 2012 5:51 pm
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12650

Re: Need help setting up

Ok, i have have a few videos and logs here to go with them so you can see exactly what's going on here. going around a turn... http://s823.beta.photobucket.com/user/adm_rsx/media/rsx%202010/7DB550BB-39AB-4A71-A719-FE033D472664-4032-0000018304211895.mp4.html i assume my cornering settings may be too ...
by Adm_rsx
Mon Nov 05, 2012 5:36 pm
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12650

Re: Need help setting up

traction control position 3, 2nd gear roll

http://s823.beta.photobucket.com/user/a ... C.mp4.html
by Adm_rsx
Mon Nov 05, 2012 8:22 am
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12650

Re: Need help setting up

Hondata wrote:Our crystal ball is broken so we'll need a datalog to help you.
Haha. I appologize. I'll get a datalog up today.
by Adm_rsx
Sun Nov 04, 2012 7:34 pm
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12650

Re: Need help setting up

So now when the car is in a low rpm (ie. taking off from a light, normal driving not launching) the car hits a rev limiter almost. It's shooting my wideband to "---" so full lean and it will not allow me to accelerate. All this is while the TC switch is on position 1. But if I turn it off, problem v...
by Adm_rsx
Sat Nov 03, 2012 2:19 pm
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12650

Re: Need help setting up

here are my kpro/traction control kals
by Adm_rsx
Sat Nov 03, 2012 12:20 am
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12650

Re: Need help setting up

You possibly need to stop datalogging on the KPro before downloading from the TC. So should I unplug kpro from my laptop and try data logging? But I do know that the car falls on its face at WOT when it reaches about 6k rpm. And my wideband will go lean. So my lean protections kicking on but I'm no...
by Adm_rsx
Thu Nov 01, 2012 9:31 pm
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12650

Re: Need help setting up

So I found out why it falls on its face but I've encountered a new problem. It fell on its face at WOT because of the over slip rev limiter. I upped the percentage and were in the clear. But now I can't read view or save the traction control datalog. I record 10-20 seconds worth an hit "read datalog...
by Adm_rsx
Thu Nov 01, 2012 9:50 am
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12650

Re: Need help setting up

Hondata wrote:Wet 3-4%, dry 5-8% for a street car.

However, it seems like there are more issues. Can you make a datalog from the traction control and post it here?
Yes I will take a datalog tonight. And try and get it posted here tonight as well. Thank you.
by Adm_rsx
Wed Oct 31, 2012 9:29 pm
Forum: Traction Control with KPro
Topic: Need help setting up
Replies: 21
Views: 12650

Need help setting up

I bought and installed TC. And I uploaded the rsx kal. Fixed the drive wheels ect. But the target slip rates from your factory tune are In between 1-8%. (Straight slip). What are optimum ranges to start out with. I know every car and tire setup will be different but my car is completely falling on i...