Search found 26 matches

by sprinto7
Wed Jun 16, 2004 2:29 pm
Forum: K-Pro / KManager
Topic: K-Manager and VSS
Replies: 5
Views: 3776

As far as I know, you will have no VTEC if there is no signal from VSS. I'll do some more testing this afteroon if it doesn't rain. Del Long One very short test with no VSS signal and the ecu did not turn on the VTP ot VTS. Engine was not up to full temp (168). Will test more after I repair cracked...
by sprinto7
Wed Jun 16, 2004 6:10 am
Forum: K-Pro / KManager
Topic: K-Manager and VSS
Replies: 5
Views: 3776

As far as I know, you will have no VTEC if there is no signal from VSS. I used to think so too when I was using the reflash code, but now that I have the K Pro and can set the launch RPM to zero, I'm not so sure. I've gone through the Honda service manual and can find no vtec failure code that has ...
by sprinto7
Tue Jun 15, 2004 5:36 am
Forum: K-Pro / KManager
Topic: K-Manager and VSS
Replies: 5
Views: 3776

K-Manager and VSS

I'm having trouble with my VSS signal (Long story) and need to know the folowing. If I set the Launch RPM to zero, will the lack of VSS signal have ANY affect on the K-Pro ecu. Does the lack VSS signal cause the ecu to go into limp home mode or any thing like that. I will be doing some testing later...
by sprinto7
Thu May 27, 2004 7:00 pm
Forum: K-Pro / KManager
Topic: Viewing Datalog
Replies: 1
Views: 2214

Viewing Datalog

I autcross my car and would like to use he datalogging function to see what RPM range my engine actually utilizes. I've done a couple of test recordings in my driveway, but haven't found an easy way to tell just what the RPM's are without exporting the log to excel. What am I missing? Thanks, Del Lo...
by sprinto7
Tue May 18, 2004 5:13 pm
Forum: K-Pro / KManager
Topic: Imobilizer and ecu swapping
Replies: 2
Views: 3288

Re: Imobilizer and ecu swapping

If I get the K-pro with a new ECU (the $1595 option) will the imobilizer still work? Can I then freely swap out the two and still have the imobilizer working? With the K Pro you can turn the immobilizer off or on. So if nothing else you could install the K Pro with immobilizer off, and use your ori...
by sprinto7
Mon May 10, 2004 4:54 am
Forum: K-Series Reflash
Topic: Ems or k pro
Replies: 5
Views: 4491

Re: Ems or k pro

TheePsycho wrote:Im putting a turbo in my rsx-s and im debating wether or not the k-pro or and aem ems would be better for tuning. Could someone help me with the pros and cons of either of these systems.
What AEM product are you thinking about? Do they have one that will vary the cam timing?
Del Long
by sprinto7
Tue May 04, 2004 9:14 am
Forum: K-Pro / KManager
Topic: RSX type S ECU for sale "ecu only" make offer
Replies: 2
Views: 3096

Re: RSX type S ECU for sale "ecu only" make offer

Team KLR wrote:Through misc. trading I have some how obtained this ecu, there is none of the immobilizer items so I am not really sure what it may be worth. If anyone is interested please make an offer.
:roll: I'll start the bidding at $50.00
Del Long
by sprinto7
Fri Apr 30, 2004 12:19 pm
Forum: K-Series Reflash
Topic: reflash or K-pro
Replies: 1
Views: 2862

Re: reflash or K-pro

I'm building a strictly race car using k20a motor. Have a few questions: 1. Do I need to run 02 sensors or 02 sensor simulator since I will not run Cat converter? 2. With just intake, header, stock cam, do you think I will ever need to use octane of over 100? 3. Assuming the mods on the car are wha...
by sprinto7
Tue Apr 20, 2004 3:07 pm
Forum: K-Pro / KManager
Topic: K Pro Calibration Tables
Replies: 0
Views: 1954

K Pro Calibration Tables

My RSX S engine has Cold Air gasket and intake, 4-2-1 header, no cat, short exhaust.
What calibration table would you reccomend I start with?
V1.0.9
Coldair?
Del Long
by sprinto7
Sat Mar 06, 2004 10:16 am
Forum: K-Pro / KManager
Topic: Launch limiter for K
Replies: 1
Views: 2496

I did get an answer from a Hondata dealer. (Forward Thrust) Launch control IS disabled in current reprogrammable units. Launch control WILL be available at a later date. I'll wait and get my ECU reworked at that time. Thanks to Forward Thrust for taking the time to answer my question. Del Long 04/20...
by sprinto7
Sat Feb 28, 2004 9:37 am
Forum: K-Pro / KManager
Topic: Launch limiter for K
Replies: 1
Views: 2496

Launch limiter for K

I currently have a Hondata reflash on my RSX-S powered autocross car. I use what I call the "Launch Limiter," (the built in ECU function that won't allow the engine to rev past 5200RPM unless the car is moving 18 MPH) to launch my car at SCCA Pro Solo events. Is the "Launch Limiter" truely disabled ...