Search found 15 matches
- Tue Jan 28, 2020 1:42 pm
- Forum: K-Pro / KManager
- Topic: KPro v4 CAN Lambda Values
- Replies: 11
- Views: 1642
Re: KPro v4 CAN Lambda Values
Thanks for the heads up. I've been working on this for a while, so I can wait a week and a half. Please feel free to send me a message if you need my contact information to figure this out over the phone.
- Tue Jan 28, 2020 12:09 pm
- Forum: K-Pro / KManager
- Topic: KPro v4 CAN Lambda Values
- Replies: 11
- Views: 1642
Re: KPro v4 CAN Lambda Values
Looks like that worked. Thanks!
- Tue Jan 28, 2020 10:20 am
- Forum: K-Pro / KManager
- Topic: KPro v4 CAN Lambda Values
- Replies: 11
- Views: 1642
Re: KPro v4 CAN Lambda Values
Doesn't seem to work as a .xls file either.
- Tue Jan 28, 2020 9:25 am
- Forum: K-Pro / KManager
- Topic: KPro v4 CAN Lambda Values
- Replies: 11
- Views: 1642
Re: KPro v4 CAN Lambda Values
Back to trying to solve my issue again after some down time. I am still experiencing the same issues after testing with 2 different KPro ECUs on different cars. I was able to pull the raw CAN data from my KPro it shows the same conditions that I described in my original post. I can share this data, ...
- Wed Sep 11, 2019 8:13 am
- Forum: K-Pro / KManager
- Topic: KPro v4 CAN Lambda Values
- Replies: 11
- Views: 1642
Re: KPro v4 CAN Lambda Values
Thanks for following up. I went through my email and checked my junk folder and quarantine software, but did not find a response to the email I sent last Thursday.
I would be glad to share any data you may need. Please let me know what specific data you would like me to send.
I would be glad to share any data you may need. Please let me know what specific data you would like me to send.
- Tue Sep 10, 2019 8:46 am
- Forum: K-Pro / KManager
- Topic: KPro v4 CAN Lambda Values
- Replies: 11
- Views: 1642
KPro v4 CAN Lambda Values
I'm currently working on a digital dash that uses the Hondata CAN Protocol (1mbps). The issue that I am experiencing is the lambda values being output via CAN under transient conditions are opposite of what is being displayed in KManager and the Hondata Mobile App. I.E. - When KPro shows a lean cond...
- Wed Jun 19, 2019 11:35 am
- Forum: K-Pro / KManager
- Topic: KPro v4 Firmware Upgrade Issues
- Replies: 4
- Views: 1330
Re: KPro v4 Firmware Upgrade Issues
Thank you for confirming that for me. I will be following up at the end of the week with my results.
- Wed Jun 19, 2019 9:12 am
- Forum: K-Pro / KManager
- Topic: KPro v4 Firmware Upgrade Issues
- Replies: 4
- Views: 1330
Re: KPro v4 Firmware Upgrade Issues
Thanks for the suggestion. I will disconnect all digital and analog inputs when I get back to the car later this week.
Is there a status bar that shows the progress of the updates, or anything that will indicate the updates are complete?
Is there a status bar that shows the progress of the updates, or anything that will indicate the updates are complete?
- Tue Jun 18, 2019 8:28 pm
- Forum: K-Pro / KManager
- Topic: KPro v4 Firmware Upgrade Issues
- Replies: 4
- Views: 1330
KPro v4 Firmware Upgrade Issues
I have a KPro v4 and am using KManager 4.4.1. The issue that I'm experiencing is that I get a pop up window when opening KManager while connected to my KPro that says "The KPro firmware will be upgraded". It shows that the USB Driver is installed, the ECU is On Line and the Ignition is on,...
- Mon Mar 11, 2019 10:28 am
- Forum: K-Pro / KManager
- Topic: K-Pro v4 Digital/Analog Connector Pins
- Replies: 2
- Views: 1405
Re: K-Pro v4 Digital/Analog Connector Pins
Thanks for the link, but I was looking for the metal terminals that are crimped on to the wire. I found some terminals on DigiKey that look like they are the same style, but I wanted to ask here first.
- Sat Mar 09, 2019 10:29 am
- Forum: K-Pro / KManager
- Topic: K-Pro v4 Digital/Analog Connector Pins
- Replies: 2
- Views: 1405
K-Pro v4 Digital/Analog Connector Pins
I'm planning on making my own harness for a CAN based dash and wanted to use new wires instead of soldering the pigtails of the connectors. A quick search on here hasn't provided any information on the pins used for the connectors. Is there a link or a part number that anyone can provide for these p...
- Wed Jul 12, 2017 1:12 pm
- Forum: K-Pro / KManager
- Topic: 4000 rpm buck and stutter
- Replies: 11
- Views: 4041
Re: 4000 rpm buck and stutter
Perfect. Thank you for the advice. I will test the alternator output voltage, then test to see if there is a voltage differential between the alternator and battery negative. I can confirm that the alternator and water pump housing are unmodified OEM pieces with no anodizing. I will test to see if t...
- Wed Jul 12, 2017 11:08 am
- Forum: K-Pro / KManager
- Topic: 4000 rpm buck and stutter
- Replies: 11
- Views: 4041
Re: 4000 rpm buck and stutter
Thank you. We will focus on the VCC and SG for the MAP and TPS. The voltage drop is an odd anomaly. The battery and charge harness have been replaced with new units. The alternator has been replaced as well, but not with a new or remanufactured part. Is there anywhere else we should be looking to re...
- Wed Jul 12, 2017 10:02 am
- Forum: K-Pro / KManager
- Topic: 4000 rpm buck and stutter
- Replies: 11
- Views: 4041
Re: 4000 rpm buck and stutter
Do you recommend checking only VCC for 5V on the TPS and MAP, or should we be checking the SG for them too? Should we also check the IG/IGP for 12V on the CKP, CMP A and CMP B sensors?
- Sun Apr 29, 2012 6:42 am
- Forum: Applications
- Topic: FlashPro for Acura TL-S
- Replies: 9
- Views: 8735
Re: FlashPro for Acura TL-S
I hope it does come out. I know a lot of people that would be interested.