Spectacle's list is great. For me I'd bump flex fuel support up to second place after analog wideband (I already have a zeitronix installed for monitoring. Simplifying changing fuels or blending fuels would be amazing)
Are ignition tables for flex fuel possible/beneficial?
Search found 16 matches
- Mon Apr 29, 2013 6:45 pm
- Forum: K-Pro / KManager
- Topic: KPro / KManager requests
- Replies: 146
- Views: 829478
- Fri Feb 24, 2012 2:10 pm
- Forum: K-Pro / KManager
- Topic: KManager speedo correction cap at +/- 50%
- Replies: 9
- Views: 6681
Re: KManager speedo correction cap at +/- 50%
Sounds good. I'll take that as a 'yes' to the gear calc question. ;)
- Fri Feb 24, 2012 1:55 pm
- Forum: K-Pro / KManager
- Topic: KManager speedo correction cap at +/- 50%
- Replies: 9
- Views: 6681
Re: KManager speedo correction cap at +/- 50%
Quick follow on question for this. As an interim fix I'm running a pulse doubler between the VSS and the Kpro then correcting -8% in KManager. This works fine for the speedo to be correct but gear calculation is incorrect. It's an AP2 s2000 with the PPG synchro gearset and a 3.90 final drive so I ha...
- Wed Jan 25, 2012 10:35 am
- Forum: K-Pro / KManager
- Topic: KManager speedo correction cap at +/- 50%
- Replies: 9
- Views: 6681
Re: KManager speedo correction cap at +/- 50%
Great, that should work. Much appreciated.
- Tue Jan 24, 2012 5:02 pm
- Forum: K-Pro / KManager
- Topic: KManager speedo correction cap at +/- 50%
- Replies: 9
- Views: 6681
Re: KManager speedo correction cap at +/- 50%
Gotcha. Any chance you can go higher on the positive side? Redid my math and I may need closer to +100%
- Tue Jan 24, 2012 3:08 pm
- Forum: K-Pro / KManager
- Topic: KManager speedo correction cap at +/- 50%
- Replies: 9
- Views: 6681
Re: KManager speedo correction cap at +/- 50%
Great, that was fast, thanks!
Is there a new cap or did you just remove it?
Is there a new cap or did you just remove it?
- Tue Jan 24, 2012 12:18 pm
- Forum: K-Pro / KManager
- Topic: KManager speedo correction cap at +/- 50%
- Replies: 9
- Views: 6681
KManager speedo correction cap at +/- 50%
Would it be possible to raise this cap in a later release of Kmanager? I'm running a PPG gearset that requires about +68% correction. I can use a speedohealer type product to correct it but it would be preferable to correct directly in KManager. Is this something you guys can add or is there a techn...
- Wed Jul 13, 2011 12:03 pm
- Forum: K-Pro / KManager
- Topic: K-Pro to Racepak interface S2000 question
- Replies: 7
- Views: 6458
Re: K-Pro to Racepak interface S2000 question
Bit 3 should be the MIL output. Ok, good, I wanted clarification because it's called the input bit field. A little confusing, seeing as the MIL indicator is an output. Probably I'm just not understanding the context. RSX E24 is not connected to the S2000 side. All right, no problem. We can hook tha...
- Tue Jul 12, 2011 9:13 pm
- Forum: K-Pro / KManager
- Topic: K-Pro to Racepak interface S2000 question
- Replies: 7
- Views: 6458
Re: K-Pro to Racepak interface S2000 question
Been a while but I'm finally getting around to setting this up and had a couple questions. Regarding the documentation here - http://www.hondata.com/help/kmanager/index.html?serialoutput.htm Is bit 4 (MIL) of the Input Bitfield byte equivalent to the MIL being displayed on the stock dash? I want to ...
- Fri Jan 21, 2011 1:18 pm
- Forum: K-Pro / KManager
- Topic: K-Pro to Racepak interface S2000 question
- Replies: 7
- Views: 6458
- Fri Jan 21, 2011 12:15 pm
- Forum: K-Pro / KManager
- Topic: K-Pro to Racepak interface S2000 question
- Replies: 7
- Views: 6458
I see, thanks. It's a street car but it is running a PRB calibration to get closed loop and lean cut using an RSX O2 sensor for wideband. I do understand that this functionality and the additional wiring it requires isn't officially supported on the S2000, which is what makes this particular applica...
- Thu Jan 20, 2011 11:01 pm
- Forum: K-Pro / KManager
- Topic: K-Pro to Racepak interface S2000 question
- Replies: 7
- Views: 6458
K-Pro to Racepak interface S2000 question
Looking to find out if it's possible to install an IQ3 dash on an S2000 that's using a K-Pro but wanted to check that it's going to work in this specific application before purchase. This would be using the 230-VM-EFIHON interface. Car is a '04 with a K-Pro (S/N 8114) It's running a PRB map with RSX...
- Fri Sep 03, 2010 11:34 am
- Forum: K-Pro / KManager
- Topic: Ignition On in KManager with no key inserted
- Replies: 6
- Views: 4126
- Thu Sep 02, 2010 8:33 pm
- Forum: K-Pro / KManager
- Topic: Ignition On in KManager with no key inserted
- Replies: 6
- Views: 4126
Results so far. In every case where the key was not in and turned fully KManager would error out when attempting to upload data. But it would try to upload. On the first connection this evening the software read the ECU as online and the ignition off as you would expect when working correctly. After...
- Thu Sep 02, 2010 3:14 pm
- Forum: K-Pro / KManager
- Topic: Ignition On in KManager with no key inserted
- Replies: 6
- Views: 4126