Search found 4 matches

by lindseyhunt1090
Mon Mar 18, 2019 5:47 pm
Forum: s300 / SManager
Topic: remove fan switch? enable fan with set ect?
Replies: 1
Views: 1241

remove fan switch? enable fan with set ect?

hey guys. currently building a new wire harness for my 2000 Integra ( b18 ) just wondering, Hondata has the force rad fan on at a set temperature. the factory fan comes on with the thermal switch thats located on the thermostat housing. that's a mechanical switch. since Hondata has the force fan on ...
by lindseyhunt1090
Sun Mar 17, 2019 11:16 am
Forum: Coil Pack Retrofit
Topic: What exactly is needed in the dizzy after CPR conversion
Replies: 10
Views: 13071

Re: What exactly is needed in the dizzy after CPR conversion

I'm in the same boat. I'm pretty sure he understands there is " no need " to remove anything from the distributor. He is asking if he can and it will still function as intended. There is no need for me to remove the wiring from my factory engine harness for my secondary o2 sensor. but it's...
by lindseyhunt1090
Tue Jun 08, 2010 12:27 pm
Forum: s300 / SManager
Topic: Boost air temperature compensation ?
Replies: 3
Views: 1834

Spunkster wrote:Impossible to say without the calibration and datalogs showing what you are describing.
can i just post my tune or something? i dont have any datalogs but everything is the same but it runs less boost when its cold out?

heres my tune anyways.
by lindseyhunt1090
Tue Jun 08, 2010 11:58 am
Forum: s300 / SManager
Topic: Boost air temperature compensation ?
Replies: 3
Views: 1834

Boost air temperature compensation ?

having some really wierd problems with boost, i dont really understand why. When its hot out 30C the car boosts fine 17psi. When its cold out (nighttime) 10 to 15C the car runs less boost. usually 12 psi ( spring pressure) you would figure it would run more boost when its cold out. So i figured it w...