Search found 23 matches

by Alex_FN2
Sun Jan 04, 2015 12:20 pm
Forum: FlashPro Manager
Topic: PRoblem with flashpro
Replies: 1
Views: 1184

Re: PRoblem with flashpro

It's nothing you can do,get your money back or else just throw that useless FlashPro into a recycle bin.
by Alex_FN2
Wed Dec 31, 2014 5:13 am
Forum: FlashPro Manager
Topic: Throttle plate closing @ high rpm
Replies: 18
Views: 11991

Re: Throttle plate closing @ high rpm

Anyone came with a solution yet?
by Alex_FN2
Fri Dec 19, 2014 3:19 am
Forum: FlashPro Manager
Topic: Throttle plate closing @ high rpm
Replies: 18
Views: 11991

Re: Throttle plate closing @ high rpm

Same problem on euro fn2 civic with US SI ecu and a J37 DBW TB with Rotrex.

It was occasionally at the beginning but today on the dyno persists every time engine revs more than 8400rpm.

If it's not electrical then we need a fix please.

J37 replaced with a brand new one with no success.
by Alex_FN2
Fri Nov 28, 2014 2:19 pm
Forum: FlashPro Manager
Topic: cooling fan will not turn off
Replies: 2
Views: 1984

Re: cooling fan will not turn off

did you use ECT2 ecu input to connect any other device there?

if you did you had to disable ECT2 cooling fan radiator control,it's an option on misc on the calibration file.

if you are not sure for anything stated above contact your tuner in order for him to check your calibration.
by Alex_FN2
Wed Dec 04, 2013 12:00 pm
Forum: Civic Type R 2007-2011 European FN2
Topic: Cold Start Problems FN2 with Rotrex Supercharger and RC750cc
Replies: 11
Views: 8115

Re: Cold Start Problems FN2 with Rotrex Supercharger and RC7

You can't install other injectors than RCs on TTS intake without modifying it

I had that kit for 2 years with these injectors with no issues.
by Alex_FN2
Sun Dec 01, 2013 4:18 pm
Forum: FlashPro Manager
Topic: FlashPro V1.7.2
Replies: 29
Views: 17994

Re: FlashPro V1.7.0

soxfan: thanks for the feedback. I see that a lot of the new features for the Civic Si are not been added to the European FN2 Type-R. Any specific reason for this? Since the CTR & US Civic Si are very similar there will not be a problem to add it to the next release; it makes sense to test the ...
by Alex_FN2
Mon Aug 27, 2012 6:58 am
Forum: Civic Type R 2006-2010 Japanese FD2
Topic: JDM FN2?
Replies: 5
Views: 14633

Re: JDM FN2?

tu5j4 wrote:Hey Shiggy. If you`re interested I have several map calibrations for the FN2.
With these calibrations I can custom tune and optimize your FN2.
Email me when you want to know more about it.

Paul.
e-tuning is easy money for some but the outcome is without any warranty.
by Alex_FN2
Sun Mar 18, 2012 7:55 am
Forum: Civic Type R 2007-2011 European FN2
Topic: Civic Si Ecu and Flashpro on FN2 Type R
Replies: 1
Views: 3336

Re: Civic Si Ecu and Flashpro on FN2 Type R

you only need US SI ecu and some wiring job,no need for US SI FP coz Euro FP is compatible with both FN2 and SI ecus.
by Alex_FN2
Fri Feb 24, 2012 1:12 pm
Forum: FlashPro Manager
Topic: ECU reacts different when connected to Flashpro.
Replies: 7
Views: 2647

Re: ECU reacts different when connected to Flashpro.

calibration uploaded again after FPM 1.2.5 downloaded.

first datalogs with no issues so maybe its was a 1.2.2 bug
by Alex_FN2
Fri Feb 17, 2012 11:19 pm
Forum: FlashPro Manager
Topic: ECU reacts different when connected to Flashpro.
Replies: 7
Views: 2647

Re: ECU reacts different when connected to Flashpro.

fuel changes was the first issue but solved after calibration uploaded 2-3 times. recent issue is that v-tec point went to 3400rpm from 2800 when flashpro was connected and went back to 2800 when disconnected! anyway your answer is more helpfull than previous and i'll see if there are any ground iss...
by Alex_FN2
Fri Feb 17, 2012 2:05 pm
Forum: FlashPro Manager
Topic: ECU reacts different when connected to Flashpro.
Replies: 7
Views: 2647

Re: ECU reacts different when connected to Flashpro.

without the calibration it is impossible to speculate. We ask for all this information as it is very important. and how on earth the calibration can help for a problem that it's obvious can't produse it? how a calibration can react just by connect or disconnect the flashpro to the obd2 and changes ...
by Alex_FN2
Fri Feb 17, 2012 11:10 am
Forum: FlashPro Manager
Topic: ECU reacts different when connected to Flashpro.
Replies: 7
Views: 2647

Re: ECU reacts different when connected to Flashpro.

nice help to my problem!

thanks for your precious time!
by Alex_FN2
Fri Feb 17, 2012 10:15 am
Forum: FlashPro Manager
Topic: ECU reacts different when connected to Flashpro.
Replies: 7
Views: 2647

ECU reacts different when connected to Flashpro.

- serial number of your FlashPro=FP-SI-INT-20243 - FlashPro Manager version=1.2.2.0 - the calibration=don't have access to the calibration - a datalog of a problem= attached - what sort of vehicle you have=Euro CTR FN2 - what sort of ECU you are using=OEM ECU - anything about the car which has been ...
by Alex_FN2
Thu Nov 03, 2011 12:17 pm
Forum: FlashPro Manager
Topic: FlashProManager V1.1.9.6 (beta)
Replies: 132
Views: 79111

Re: FlashProManager V1.1.9.4 (beta)

This is the first time someone has mentioned that the oil light did work in earlier versions, and now does not. In that case, post your calibration. all started when 1.1.9.3 beta released. http://www.hondata.com/forum/viewtopic.php?f=29&t=13243 http://www.civinfo.com/forum/flashpro/64692-new-fl...
by Alex_FN2
Thu Nov 03, 2011 11:36 am
Forum: FlashPro Manager
Topic: FlashProManager V1.1.9.6 (beta)
Replies: 132
Views: 79111

Re: FlashProManager V1.1.9.4 (beta)

many times you're refering for map cals as race cals so i did the same. Every FN2 MAP calibration has 'race' in the name. They are calibrations for race cars. In any case, the AFM calibration has MAP based fuel tables. please don't edit my posts and tell me why do i have to pay for a new AFM cal wi...