Search found 87 matches

by burmese434
Mon Feb 19, 2018 7:45 am
Forum: S300 Calibrations
Topic: Looking for a b20 non vtec turbo base map
Replies: 0
Views: 1019

Looking for a b20 non vtec turbo base map

I've been away for awhile so I'll have to relearn things. My setup is...

Stock b20 with 450 dsm injector. Gsp 57 trim turbo. Turbosmart waste gate. 12 pound spring.

Any help will be awesome and I'll double check older post for a basemap that I might've missed. Thanks..
by burmese434
Fri Apr 13, 2012 11:46 am
Forum: S300 Calibrations
Topic: overall fuel trim problem.
Replies: 3
Views: 1731

Re: overall fuel trim problem.

42psi
by burmese434
Thu Apr 12, 2012 4:27 pm
Forum: s300 / SManager
Topic: always hang when datalog
Replies: 17
Views: 3697

Re: always hang when datalog

My buddies car was doing the same thing. it would for some reason disconnect while driving and not datalog all the time. He changed to ngk be7 and updated to the newest SW of hondata and it stopped.
by burmese434
Thu Apr 12, 2012 4:02 pm
Forum: S300 Calibrations
Topic: overall fuel trim problem.
Replies: 3
Views: 1731

overall fuel trim problem.

Built 2.0 gsr turbo w/ RC 1200cc injectors. I'm having trouble getting the a/f fixed. It seems like the injectors dead times are way to high but I put in what rc told me. I tried using my lsvtec 1200cc tune and changing the dead times and still don't seem right. So I tired a new map and putting in t...
by burmese434
Wed Jan 04, 2012 12:20 pm
Forum: S300 Calibrations
Topic: Need tuners help to improve tune
Replies: 7
Views: 2866

Re: Need tuners help to improve tune

first thing you need to keep your AFR's in the area of 11.8-12.4 WOT and 12.4-13.00 at light to part throttle, after getting your AFRs right you should be able to keep EGT and ECT down allowing you to advance timing a little more thus more power to wheels. As for the boost creep that is mostly caus...
by burmese434
Tue Jan 03, 2012 11:57 pm
Forum: S300 Calibrations
Topic: Need tuners help to improve tune
Replies: 7
Views: 2866

Re: Need tuners help to improve tune

Ill try but traction is a big issue unless im at the track. I found one when I upped the boost to 26 well 25 and it creeped. I didn't touch the WOT part of the map so I hope this datalog helps.
by burmese434
Tue Jan 03, 2012 5:24 pm
Forum: S300 Calibrations
Topic: Need tuners help to improve tune
Replies: 7
Views: 2866

Need tuners help to improve tune

Let me know what you guys think. My setup consist of lsvtec 81.5mm bore b18b Sleeved b16 head gsr cams W/victor x intake w/dual valve spring and titanium retainers 1200cc injectors Walbro 255lph stock tb T4 twinscroll topmount BWsx300 turbo with divided 91.ar housing. Stock ignition. Now before you ...
by burmese434
Tue Jan 03, 2012 4:46 pm
Forum: S300 Calibrations
Topic: Need Basemap for LS-V Turbo
Replies: 1
Views: 1384

Re: Need Basemap for LS-V Turbo

This should get you up and going.
by burmese434
Fri Dec 23, 2011 10:27 am
Forum: s300 / SManager
Topic: Switched gm3bar to stock map sensor Help
Replies: 2
Views: 949

Re: Switched gm3bar to stock map sensor Help

Dam lol well can anyone link me to the correct wiring diagram for my 96 civic cx?
by burmese434
Thu Dec 22, 2011 9:42 pm
Forum: s300 / SManager
Topic: Switched gm3bar to stock map sensor Help
Replies: 2
Views: 949

Switched gm3bar to stock map sensor Help

When I changed map sensors from a GM 3bar back to a stock map the car starts then dies right out? The only way it will run is if I selected the gm 3bar (Motec) setting? Hondata s300. I have not installed my wb yet and I was wondering that since I have my wb hooked up to my ecu,that might be the reas...
by burmese434
Mon Dec 19, 2011 12:40 pm
Forum: S300 Calibrations
Topic: need basemap; h22 89mm 8.5:1 comp turbo 40psi
Replies: 4
Views: 1711

Re: need basemap; h22 89mm 8.5:1 comp turbo 40psi

Do you self a favor and do your research before you ask for a tune. With 40psi you have to have your motor tuned perfect to hold that kind of pressure. Unless your wanting to build 40psi on a tiny dsm 14b right before the comp and exh wheels come flying out at you.
by burmese434
Wed Oct 12, 2011 5:46 pm
Forum: S300 Calibrations
Topic: Need s366 base map and 1200cc injectors
Replies: 6
Views: 1747

Re: Need s366 base map and 1200cc injectors

Sweet thanks, what hp was you getting and was you using the bws366?
by burmese434
Wed Oct 12, 2011 4:21 pm
Forum: S300 Calibrations
Topic: Would love help Getting passed 2k rpm! ^_^
Replies: 12
Views: 2543

Re: Would love help Getting passed 2k rpm! ^_^

Check and see if you map and tps plugs are backwards?
by burmese434
Wed Oct 12, 2011 3:41 pm
Forum: S300 Calibrations
Topic: Need s366 base map and 1200cc injectors
Replies: 6
Views: 1747

Re: Need s366 base map and 1200cc injectors

Still looking
by burmese434
Fri Sep 16, 2011 4:58 pm
Forum: s300 / SManager
Topic: A/F wont read richier than 11.85
Replies: 8
Views: 2326

Re: A/F wont read richier than 11.85

I had the same problem lol. Depin ur d10 and put it in your d14 o2 plug works alot better. lmk