Search found 24 matches

by methods
Fri Dec 23, 2005 7:59 am
Forum: s100/s200
Topic: G-Sensor Discontinued?
Replies: 5
Views: 3124

I have got one as well (that i never use)

deviantmethods@gmail.com
by methods
Fri Oct 07, 2005 11:49 am
Forum: s300 / SManager
Topic: Connect wideband to o2 pinout or ELD or does it matter?
Replies: 7
Views: 6049

This ability should be advertised. I wasn?t considering upgrading until I read this. The lamest part of the old S200 was having to swap my WBO2/Narrowband back and forth. Compounding that was that I could never datalog in closed loop. It was always a guessing game as to where I actually ran in close...
by methods
Mon Jul 11, 2005 9:56 am
Forum: s100/s200
Topic: AEM Wideband problem.
Replies: 21
Views: 27610

First thing you need to do is take a DMM (MultiMeter or Volt meter) and read the ?actual? voltage that is being developed at the pin of the ECU. I would then measure the same voltage at the Gauge. If the two voltages are the same (or if the first reading matches the gauge reading) then you know that...
by methods
Sun Dec 05, 2004 9:32 pm
Forum: s100/s200
Topic: need help.. wideband voltage not matching romeditor
Replies: 13
Views: 6801

You arnt making any sense. First, do you mean A/F or Lambda? You explained your Table in A/F then you claimed you were off by a factor of 1.2 Lambda. I assume you know the difference? If you DO mean 1.2 points of A/F (as in you think it should be 12 and it reads 13.2) I will ask how you found this o...
by methods
Wed Dec 01, 2004 11:48 pm
Forum: s100/s200
Topic: need help.. wideband voltage not matching romeditor
Replies: 13
Views: 6801

The above rand that you are responding to is months old. (oct 2003) I absolutely agree with you though. It is not worth the trouble. Since then I have contacted AEM (many times) and their new Gauge Style WBO2 is compatible with Hondata. They cut their max output in half. Thanks for the reply though....
by methods
Wed Dec 01, 2004 10:24 pm
Forum: s100/s200
Topic: need help.. wideband voltage not matching romeditor
Replies: 13
Views: 6801

You need to do your own research. The Hondata ECU can take 0 ? 3.8V on the O2 input. That I will give you. Go to the PLX website and look at the graph of their output voltage vs. A/F You will find that their range falls within the 0-3.8V range. You still need to go and confirm that though to be thor...
by methods
Sat Sep 18, 2004 10:54 am
Forum: Non-Hondata
Topic: aem wideband gauge style
Replies: 3
Views: 3488

I am going to shoot my self if one more person asks a question like that. It is a very simple formula: READ THE AEM WBO2 INSTRUCTION MANUAL. You will find a VERY CLEAR GRAPH that shows the A/F vs. Voltage. The instruction manual can be found at the AEM website forum. If you can?t do that, let me ans...
by methods
Sun Sep 12, 2004 7:32 pm
Forum: K-Series Reflash
Topic: question for all hondata 4 users
Replies: 2
Views: 3037

Why don?t you hook up a volt meter to the VTEC solenoid and you tell us?
by methods
Tue Sep 07, 2004 8:51 am
Forum: s100/s200
Topic: AEM Wideband problem.
Replies: 21
Views: 27610

Very nice. I don?t have the table in front of me, but you have the right idea.
by methods
Mon Sep 06, 2004 7:29 pm
Forum: s100/s200
Topic: AEM Wideband problem.
Replies: 21
Views: 27610

I wrote your answer, and then deleted it. :lol:

You need to figure that out for yourself. :shock:

No more free handouts. :D
by methods
Mon Sep 06, 2004 12:06 pm
Forum: s100/s200
Topic: AEM Wideband problem.
Replies: 21
Views: 27610

The new AEM WBO2 (gauge pod style)

DOES NOT NEED THIS DEVICE :P


Due to brow beating, AEM converted its output to 0-3.5V?. This is compatible with Hondata.

-methods
by methods
Thu Jul 15, 2004 8:39 am
Forum: s100/s200
Topic: AEM Wideband problem.
Replies: 21
Views: 27610

DUDE, Do you do any research AT ALL? :shock: Have you not read any of these posts or visited the suggested websites? :? If you need to ask a question like that you are NOT ready to buy a WBO2. :roll: Listen, I feel bad for you so I am going to give you a hint: AS I HAVE SAID MANY TIMES BEFORE Hondat...
by methods
Mon Jul 12, 2004 4:59 pm
Forum: HondaLogger Software
Topic: A/F ratio in Palmlogger
Replies: 1
Views: 2911

If they are going to incorporate the A/F conversion tables they should (in my humble opinion) include 2 or more ?custom? areas for entry that can be SAVED. I run multiple Oxygen sensors and it really sucks to have to enter the entire conversion table every time I change them in the regular software.
by methods
Wed Jul 07, 2004 1:13 pm
Forum: s100/s200
Topic: AEM Wideband problem.
Replies: 21
Views: 27610

This is an old post. I don?t frequent this forum, the only reason I knew it was here is because I ?subscribed? to it months ago. The NEW AEM WBO2 (gauge type) does not need this fix. It has a 0-3.5V output. The old AEM WBO2 (box type) does need it and I don?t sell them. I assume you went to my websi...
by methods
Fri Jun 04, 2004 2:12 pm
Forum: s100/s200
Topic: Can't find adapter for 3 bar mapsensor anywhere
Replies: 2
Views: 1953

It is called a soldering iron and some epoxy.....

Make a perminant mate to the sensor and place your "removable" connector on the cabling.