I have got one as well (that i never use)
deviantmethods@gmail.com
Search found 24 matches
- Fri Dec 23, 2005 7:59 am
- Forum: s100/s200
- Topic: G-Sensor Discontinued?
- Replies: 5
- Views: 3124
- Fri Oct 07, 2005 11:49 am
- Forum: s300 / SManager
- Topic: Connect wideband to o2 pinout or ELD or does it matter?
- Replies: 7
- Views: 6054
This ability should be advertised. I wasn?t considering upgrading until I read this. The lamest part of the old S200 was having to swap my WBO2/Narrowband back and forth. Compounding that was that I could never datalog in closed loop. It was always a guessing game as to where I actually ran in close...
- Mon Jul 11, 2005 9:56 am
- Forum: s100/s200
- Topic: AEM Wideband problem.
- Replies: 21
- Views: 27612
First thing you need to do is take a DMM (MultiMeter or Volt meter) and read the ?actual? voltage that is being developed at the pin of the ECU. I would then measure the same voltage at the Gauge. If the two voltages are the same (or if the first reading matches the gauge reading) then you know that...
- Sun Dec 05, 2004 9:32 pm
- Forum: s100/s200
- Topic: need help.. wideband voltage not matching romeditor
- Replies: 13
- Views: 6801
You arnt making any sense. First, do you mean A/F or Lambda? You explained your Table in A/F then you claimed you were off by a factor of 1.2 Lambda. I assume you know the difference? If you DO mean 1.2 points of A/F (as in you think it should be 12 and it reads 13.2) I will ask how you found this o...
- Wed Dec 01, 2004 11:48 pm
- Forum: s100/s200
- Topic: need help.. wideband voltage not matching romeditor
- Replies: 13
- Views: 6801
The above rand that you are responding to is months old. (oct 2003) I absolutely agree with you though. It is not worth the trouble. Since then I have contacted AEM (many times) and their new Gauge Style WBO2 is compatible with Hondata. They cut their max output in half. Thanks for the reply though....
- Wed Dec 01, 2004 10:24 pm
- Forum: s100/s200
- Topic: need help.. wideband voltage not matching romeditor
- Replies: 13
- Views: 6801
You need to do your own research. The Hondata ECU can take 0 ? 3.8V on the O2 input. That I will give you. Go to the PLX website and look at the graph of their output voltage vs. A/F You will find that their range falls within the 0-3.8V range. You still need to go and confirm that though to be thor...
- Sat Sep 18, 2004 10:54 am
- Forum: Non-Hondata
- Topic: aem wideband gauge style
- Replies: 3
- Views: 3488
I am going to shoot my self if one more person asks a question like that. It is a very simple formula: READ THE AEM WBO2 INSTRUCTION MANUAL. You will find a VERY CLEAR GRAPH that shows the A/F vs. Voltage. The instruction manual can be found at the AEM website forum. If you can?t do that, let me ans...
- Sun Sep 12, 2004 7:32 pm
- Forum: K-Series Reflash
- Topic: question for all hondata 4 users
- Replies: 2
- Views: 3038
- Tue Sep 07, 2004 8:51 am
- Forum: s100/s200
- Topic: AEM Wideband problem.
- Replies: 21
- Views: 27612
- Mon Sep 06, 2004 7:29 pm
- Forum: s100/s200
- Topic: AEM Wideband problem.
- Replies: 21
- Views: 27612
- Mon Sep 06, 2004 12:06 pm
- Forum: s100/s200
- Topic: AEM Wideband problem.
- Replies: 21
- Views: 27612
- Thu Jul 15, 2004 8:39 am
- Forum: s100/s200
- Topic: AEM Wideband problem.
- Replies: 21
- Views: 27612
DUDE, Do you do any research AT ALL? :shock: Have you not read any of these posts or visited the suggested websites? :? If you need to ask a question like that you are NOT ready to buy a WBO2. :roll: Listen, I feel bad for you so I am going to give you a hint: AS I HAVE SAID MANY TIMES BEFORE Hondat...
- Mon Jul 12, 2004 4:59 pm
- Forum: HondaLogger Software
- Topic: A/F ratio in Palmlogger
- Replies: 1
- Views: 2911
If they are going to incorporate the A/F conversion tables they should (in my humble opinion) include 2 or more ?custom? areas for entry that can be SAVED. I run multiple Oxygen sensors and it really sucks to have to enter the entire conversion table every time I change them in the regular software.
- Wed Jul 07, 2004 1:13 pm
- Forum: s100/s200
- Topic: AEM Wideband problem.
- Replies: 21
- Views: 27612
This is an old post. I don?t frequent this forum, the only reason I knew it was here is because I ?subscribed? to it months ago. The NEW AEM WBO2 (gauge type) does not need this fix. It has a 0-3.5V output. The old AEM WBO2 (box type) does need it and I don?t sell them. I assume you went to my websi...
- Fri Jun 04, 2004 2:12 pm
- Forum: s100/s200
- Topic: Can't find adapter for 3 bar mapsensor anywhere
- Replies: 2
- Views: 1953