Search found 42 matches
- Thu Apr 10, 2014 2:05 pm
- Forum: FlashPro Manager
- Topic: FlashProManager V1.8.3 beta (Bluetooth)
- Replies: 92
- Views: 44363
Re: FlashProManager V1.8.0 beta (Bluetooth)
My flashpro is left in car from previous datalogging session. Reached destination, turned off engine. Later when I turned key to ignition position the flashpro power light comes on for a sec then off. After that, the flashpro stays off even after engine is started. excatly the same problem as one o...
- Mon Apr 07, 2014 7:06 pm
- Forum: FlashPro Manager
- Topic: FlashProManager V1.8.3 beta (Bluetooth)
- Replies: 92
- Views: 44363
Re: FlashProManager V1.8.0 beta (Bluetooth)
Hondata wrote:The 3 digit codes are part numbers (RTW-U51) and the 4 digit codes are calibration IDs (RTW-U510).
Does it mean version v1.8 is now supported ECU code RTW-U51? Asian First Generation CVT CRZ?
Thanks!
Terence
- Mon Apr 07, 2014 2:16 am
- Forum: FlashPro Manager
- Topic: FlashProManager V1.8.3 beta (Bluetooth)
- Replies: 92
- Views: 44363
Re: FlashProManager V1.8.0 beta (Bluetooth)
I read the flash pro help file. V1.8.1 (4 Apr 2014) • FlashPro firmware updated to version 63 • Bluetooth enabled • [2012+ Civic] Added support for RX0-K020 through RX0-K060 • [07-08 TSX] Added ability to program AT ECU with MT program • [TL] Added ability to program AT ECU with MT program, only bas...
- Mon Mar 17, 2014 8:52 pm
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
- Replies: 9
- Views: 17065
Re: Hondata FlashPro for Asia CRZ - Manual Trasmission
I think Hondata not interested to make it better for CRZ.
The only way for AutoStop should be Pivot ISC then..
The only way for AutoStop should be Pivot ISC then..
- Mon Feb 10, 2014 2:25 am
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Support of RTW-D52
- Replies: 3
- Views: 11657
Re: Support of RTW-D52
We will wait for it.....
- Mon Nov 25, 2013 12:35 am
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Hondata FlashPro for Asia CRZ - CVT Auto Trasmission
- Replies: 6
- Views: 13127
Re: Hondata FlashPro for Asia CRZ - CVT Auto Trasmission
As I can see ASIA CRZ CVT is supported in Flashpro Manager v1.6.3.0.
Does it mean hondata flashpro will support ASIA CRZ CVT soon??
Does it mean hondata flashpro will support ASIA CRZ CVT soon??
- Mon Nov 25, 2013 12:34 am
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Throttle plate tables
- Replies: 6
- Views: 12332
Re: Throttle plate tables
This issue was solved in Hondata Flashpro Manger version 1.6.3.0.
Thank you.
Thank you.
- Mon Sep 02, 2013 2:17 am
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Throttle plate tables
- Replies: 6
- Views: 12332
Re: Throttle plate tables
May I know what is the default value?
- Fri Aug 30, 2013 1:02 am
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Throttle plate tables
- Replies: 6
- Views: 12332
Re: Throttle plate tables
Other calibration like Japan, Euro or US the Load Index is not editable, only Asia Calibration P020, the Load index is editable. I am confused when editing the load index, i can see there are 6 option in the drop down panel (kPa, inches, mbar, bar, Kpa, psi, kg/cm), but which one shall i use?... tha...
- Wed Aug 28, 2013 2:17 am
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
- Replies: 9
- Views: 17065
Re: Hondata Flashpro for Asia CRZ
1. Yes, however the ECU will only let the idle speed drop so low. eg if you set all the tables to 600 rpm the ECU will not go below 750 rpm. 2. Return to stock, do a couple of dyno runs, then upload your calibration, dyno & compare. 3. Dyno tuning is preferred, but more depends on the experienc...
- Mon Aug 26, 2013 9:37 am
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
- Replies: 9
- Views: 17065
Re: Hondata FlashPro for Asia CRZ - Manual Trasmission
One more question to add... 4. As I understand, "VTEC Oil Pressure Switch" is not a sensor, but a switch. Meaning it is either open or closed... Typically, with a switch, once it sees a certain oil pressure, it opens. Once oil pressure drops below that certain pressure, it closes. Am i rig...
- Thu Aug 22, 2013 7:31 pm
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Hondata FlashPro for Asia CRZ - CVT Auto Trasmission
- Replies: 6
- Views: 13127
Re: FlashPro for Asia CVT CRZ
Hi,
I knew that this is a repeated question which was already answered.
But many of my friends still keep asking when will Hondata release the product for Asia CRZ.
We hope Hondata can add some plan for it.
Thank you,
I knew that this is a repeated question which was already answered.
But many of my friends still keep asking when will Hondata release the product for Asia CRZ.
We hope Hondata can add some plan for it.
Thank you,
- Thu Aug 22, 2013 7:28 pm
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
- Replies: 9
- Views: 17065
Re: Hondata Flashpro for Asia CRZ
Question... All Asia CRZ comes with "Engine Auto Stop" and "Immobiliser" features, I know these are good for stock car since it comes with it. 1. Once my CRZ is supercharged, will this feature damage my supercharged engine since the charged engine temperature is higher than stock...
- Tue Aug 13, 2013 9:20 pm
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
- Replies: 9
- Views: 17065
- Sun Aug 11, 2013 11:33 pm
- Forum: CR-Z 2010-2012 US/Europe/Asia
- Topic: Hondata FlashPro for Asia CRZ - Manual Trasmission
- Replies: 9
- Views: 17065
Re: Hondata Flashpro for Asia CRZ
1. Yes, however the ECU will only let the idle speed drop so low. eg if you set all the tables to 600 rpm the ECU will not go below 750 rpm. 2. Return to stock, do a couple of dyno runs, then upload your calibration, dyno & compare. 3. Dyno tuning is preferred, but more depends on the experienc...