Search found 13 matches
- Thu Jul 04, 2013 1:43 pm
- Forum: Traction Control with FlashPro
- Topic: 2007 FA5 issues
- Replies: 8
- Views: 16019
Re: 2007 FA5 issues
ok, my flashpro got updated, but the tc unit did not. (wasnt connected at the time) I also got help from vitviper to turn off ELD in flashpro (didnt make sense, but I did it) and with that and the update, no more CEL! However, the tc unit needs to be updated and it wont update. I've tried unplugging...
- Thu Jul 04, 2013 1:39 pm
- Forum: General / Traction Control Manager Software
- Topic: Cant upload calibration to tc unit
- Replies: 2
- Views: 12709
Cant upload calibration to tc unit
I cant upload any config files to my tc unit.
flashpro v 1.5.6.0
tc: 1.0.4.0
2007 civic si sedan (turbo)
What should I do?
flashpro v 1.5.6.0
tc: 1.0.4.0
2007 civic si sedan (turbo)
What should I do?
- Wed Jun 26, 2013 8:30 pm
- Forum: Traction Control with FlashPro
- Topic: 2007 FA5 issues
- Replies: 8
- Views: 16019
Re: 2007 FA5 issues
1.5.5.0
- Fri Jun 21, 2013 11:44 am
- Forum: Traction Control with FlashPro
- Topic: 2007 FA5 issues
- Replies: 8
- Views: 16019
Re: 2007 FA5 issues
Check that the selector switch inside the Traction Control unit is set for active ABS sensors. Then check that you have wired the TC unit in on the negative side of the wiring for each sensor - you'll need to test with a multimeter to make sure. Checked the wiring and it was correct. Just as a side...
- Tue Jun 11, 2013 9:56 am
- Forum: Traction Control with FlashPro
- Topic: 2007 FA5 issues
- Replies: 8
- Views: 16019
Re: 2007 FA5 issues
the switch was definitely flipped (I personally opened the box to check). We'll check the wiring for the negative side.
- Tue Jun 04, 2013 2:15 pm
- Forum: Traction Control with FlashPro
- Topic: 2007 FA5 issues
- Replies: 8
- Views: 16019
2007 FA5 issues
I'm having really strange issues, and my shop and I can't seem to figure it out. I have a 2007 Civic SI that's highly modified running about 570whp. Built head, motor, trans, 62mm turbo, suspension, 2piece wilwood rotors/calipers, 2 walbro fuel pumps etc. Battery and alternator are stock and A/C has...
- Mon Sep 10, 2012 9:33 am
- Forum: FlashPro Manager
- Topic: Bugs with Flashpro manager low cam fuel map
- Replies: 8
- Views: 3889
Re: Bugs with Flashpro manager low cam fuel map
where do you want me to send them to? I attached my FP settings, 1 of my datalogs and my calibration file in the 2nd post of this thread (check after the 2nd picture)
I can email/send where ever you'd like though.
I can email/send where ever you'd like though.
- Wed Sep 05, 2012 4:36 pm
- Forum: FlashPro Manager
- Topic: Bugs with Flashpro manager low cam fuel map
- Replies: 8
- Views: 3889
Re: Bugs with Flashpro manager low cam fuel map
notice when i change the low load from -4 to -3.9psi, it's all of a sudden ok..... but going from -4 to -4.4 doesnt make as big of a difference, and yet my AFR's are right where they're suppose to be. between image 2 and image 1, i change just the middle afr difference, and it changes the values OUT...
- Wed Sep 05, 2012 4:35 pm
- Forum: FlashPro Manager
- Topic: Bugs with Flashpro manager low cam fuel map
- Replies: 8
- Views: 3889
Re: Bugs with Flashpro manager low cam fuel map
And here's the rest of the screenshots.
- Wed Sep 05, 2012 4:34 pm
- Forum: FlashPro Manager
- Topic: Bugs with Flashpro manager low cam fuel map
- Replies: 8
- Views: 3889
Re: Bugs with Flashpro manager low cam fuel map
here are some screenshots now that I am home, and I uploaded my calibration as well as 1 of the datalogs. I'll show more screenshots to show how the column is changing. It doesnt make sense.
- Wed Sep 05, 2012 10:22 am
- Forum: FlashPro Manager
- Topic: Bugs with Flashpro manager low cam fuel map
- Replies: 8
- Views: 3889
Bugs with Flashpro manager low cam fuel map
I have been doing datalogging for the past few days and updated to flashpro manager 1.3.3 recently as well. Without changing anything, all of a sudden the #7 column on all my low cam fuel maps are reading too lean. I have my lambda overlay setup like this: 14.7 below -4.3psi 13.1 between 11.9 above ...
- Mon Jan 04, 2010 2:41 pm
- Forum: FlashPro Manager
- Topic: MAP display bug
- Replies: 3
- Views: 2740
- Thu Dec 31, 2009 11:18 am
- Forum: FlashPro Manager
- Topic: MAP display bug
- Replies: 3
- Views: 2740
MAP display bug
I was trying to change the range at which I see PSI from 0 through +100 to -30 through +15 for the datalogging graphs. But the graph for the actual datalog looks very flat, even though I fluctuate from -28 to +11 The actual graph looks more accurate when I put in a value of 0 to 2 I'll post a screen...