Search found 40 matches
- Sun Dec 29, 2013 3:39 pm
- Forum: K-Series Reflash
- Topic: Was this ECU Reflashed?
- Replies: 1
- Views: 3065
Was this ECU Reflashed?
I have a PNF with 2 serial numbers... Part # 37820-PNF-A11 the number on the case is 092454-3717 (has a hondata sticker the number on the circuit board is 092454-3711 can you check if either one of these numbers has been reflashed, i bought a ep with jrsc and a "reflash" that i want to upg...
- Sun Dec 29, 2013 10:40 am
- Forum: K-Series Reflash
- Topic: P0172 JRSC 03 EP3 K20A3
- Replies: 3
- Views: 4196
Re: P0172 JRSC 03 EP3 K20A3
that's what I figured, I finally have the money for the kpro upgrade, talking with a local dealer (evans tuning) he said to buy kpro threw him and send my reflashed ecu to hondata, but you will be closed til 2014? is that correct? if so I can purchase off his site just not sure where to send my ecu
- Tue Nov 19, 2013 8:58 pm
- Forum: K-Series Reflash
- Topic: P0172 JRSC 03 EP3 K20A3
- Replies: 3
- Views: 4196
P0172 JRSC 03 EP3 K20A3
i bought my ep with the jrsc kit, also has a hks catback and reflash, it keeps throwing a p0172 - fuel system too rich the car had a test pipe so i installed a know good cat with know good af and secondary o2 sensors, tested map, injectors and also no vac leaks was wondering if any others were havin...
- Tue Jan 15, 2013 7:10 pm
- Forum: K-Pro Calibrations
- Topic: Can I get a base tune for K20z1 Intake/RBC/RH/Exhaust
- Replies: 3
- Views: 4219
- Tue Jan 15, 2013 6:59 pm
- Forum: S300 Calibrations
- Topic: p06 basemap
- Replies: 9
- Views: 4491
- Fri Jan 04, 2013 5:38 am
- Forum: FlashPro Calibrations
- Topic: FG2 K20/K24 calibration
- Replies: 1
- Views: 3273
- Fri Jan 04, 2013 5:37 am
- Forum: K-Pro Calibrations
- Topic: k20a2 I/H/2.5"E tune
- Replies: 2
- Views: 2846
Re: k20a2 I/H/2.5"E tune
if your still looking for etuning shoot me an email
I have 100+ base maps on file and over 3 years experience
tomzauto@yahoo.com
I have 100+ base maps on file and over 3 years experience
tomzauto@yahoo.com
- Fri Jan 04, 2013 5:34 am
- Forum: K-Pro Calibrations
- Topic: kseries
- Replies: 2
- Views: 2236
- Fri Jan 04, 2013 5:34 am
- Forum: K-Pro Calibrations
- Topic: Need calibration for K20A Stock engine ( K20A for DC5 )
- Replies: 5
- Views: 3128
- Fri Jan 04, 2013 5:33 am
- Forum: K-Pro Calibrations
- Topic: ID1000's, Rcrew headder, 3" exhaust, rbc, IMG, custom 3"cai
- Replies: 2
- Views: 2505
- Fri Jan 04, 2013 5:32 am
- Forum: K-Pro Calibrations
- Topic: please help, basemap needed
- Replies: 4
- Views: 2867
- Fri Oct 05, 2012 11:16 am
- Forum: K-Pro / KManager
- Topic: cam angle reads -20 degrees
- Replies: 1
- Views: 1566
cam angle reads -20 degrees
i have a vtec killer setup on a k20a3 using tsx cams, camcmd is locked at 0 and cam angle is locked at -20
car runs ok but is a little rich
car runs ok but is a little rich
- Thu Sep 20, 2012 4:00 am
- Forum: FlashPro Calibrations
- Topic: Need calibration for stock K24, 8.8:1 CR forged pistons
- Replies: 3
- Views: 3270
- Thu Sep 20, 2012 3:56 am
- Forum: K-Pro Calibrations
- Topic: K24/K20 Map
- Replies: 5
- Views: 6417
- Thu Sep 20, 2012 3:55 am
- Forum: K-Pro Calibrations
- Topic: NEEDED k20z1 map
- Replies: 1
- Views: 1992