Search found 10 matches

by darren
Tue Apr 16, 2019 2:00 pm
Forum: s300 / SManager
Topic: ITB stalling
Replies: 0
Views: 3003

ITB stalling

Got an issue with my b16 on itbs stalling when coming to a stop. If you blip the throttle it will not stall, but if you let you run down on its own it will stall.

Ive tried so many different settings for the overun fuel cut but nothing makes a difference.
by darren
Wed Jun 13, 2018 5:01 am
Forum: s300 / SManager
Topic: Injectors being cut
Replies: 9
Views: 2059

Re: Injectors being cut

Yes, vacuum taken from all 4 runner's to a vac box, then map sensor reading vac from there
by darren
Mon Jun 11, 2018 11:53 pm
Forum: s300 / SManager
Topic: Injectors being cut
Replies: 9
Views: 2059

Re: Injectors being cut

Calibration is now attached
by darren
Mon Jun 11, 2018 11:46 am
Forum: s300 / SManager
Topic: Injectors being cut
Replies: 9
Views: 2059

Re: Injectors being cut

You can see the problem in the first 15 seconds
by darren
Mon Jun 11, 2018 11:42 am
Forum: s300 / SManager
Topic: Injectors being cut
Replies: 9
Views: 2059

Re: Injectors being cut

It has been tuned on a dyno by myself, its my first tune so I'm still learning but runs great apart from 1-2% throttle opening. I shall upload the datalog
by darren
Sun Jun 10, 2018 1:15 pm
Forum: s300 / SManager
Topic: Injectors being cut
Replies: 9
Views: 2059

Injectors being cut

So if I'm driving along at say 30mph, 1% to 2% throttle, my injectors keep being cut causing a jerk.
Engine is a b16 on ITB's

Any ideas?
by darren
Thu Apr 19, 2018 10:29 am
Forum: s300 / SManager
Topic: TPS issue?
Replies: 4
Views: 1205

Re: TPS issue?

Attached is a short datalog, and the calibration.
The cal is work in progress, just a rough starting point to get it up and running.

You can see the issue I'm having tho
by darren
Wed Apr 18, 2018 2:42 pm
Forum: s300 / SManager
Topic: TPS issue?
Replies: 4
Views: 1205

Re: TPS issue?

Fully closed 1, and fully open 100.
On idle, my map is 44kpa, i did enter 44 in the fully closed box, but TPS and load site still didnt match
by darren
Wed Apr 18, 2018 1:18 pm
Forum: s300 / SManager
Topic: TPS issue?
Replies: 4
Views: 1205

TPS issue?

Seem to be having an issue with my tps in s300, or I'm being stupid... anyway, i can set the minimum and maximum reading in the tps tab, and it reads 0-100%, perfect. The problem is the high lighted cells in the fuel and ignition tables don't match the datalog. For example, I'm cruising at 4% tps, a...
by darren
Wed Aug 12, 2009 10:32 am
Forum: s300 / SManager
Topic: Cant upload on to S300. Please Help
Replies: 7
Views: 3324

Cant upload on to S300. Please Help

Noob question here.
When i try and upload a calibration on to my ecu it comes up with 'error' :?
It says its 'online' in the bottom left corner, so not sure what to do.

Any help would be great