Got an issue with my b16 on itbs stalling when coming to a stop. If you blip the throttle it will not stall, but if you let you run down on its own it will stall.
Ive tried so many different settings for the overun fuel cut but nothing makes a difference.
Search found 10 matches
- Tue Apr 16, 2019 2:00 pm
- Forum: s300 / SManager
- Topic: ITB stalling
- Replies: 0
- Views: 3028
- Wed Jun 13, 2018 5:01 am
- Forum: s300 / SManager
- Topic: Injectors being cut
- Replies: 9
- Views: 2086
Re: Injectors being cut
Yes, vacuum taken from all 4 runner's to a vac box, then map sensor reading vac from there
- Mon Jun 11, 2018 11:53 pm
- Forum: s300 / SManager
- Topic: Injectors being cut
- Replies: 9
- Views: 2086
Re: Injectors being cut
Calibration is now attached
- Mon Jun 11, 2018 11:46 am
- Forum: s300 / SManager
- Topic: Injectors being cut
- Replies: 9
- Views: 2086
Re: Injectors being cut
You can see the problem in the first 15 seconds
- Mon Jun 11, 2018 11:42 am
- Forum: s300 / SManager
- Topic: Injectors being cut
- Replies: 9
- Views: 2086
Re: Injectors being cut
It has been tuned on a dyno by myself, its my first tune so I'm still learning but runs great apart from 1-2% throttle opening. I shall upload the datalog
- Sun Jun 10, 2018 1:15 pm
- Forum: s300 / SManager
- Topic: Injectors being cut
- Replies: 9
- Views: 2086
Injectors being cut
So if I'm driving along at say 30mph, 1% to 2% throttle, my injectors keep being cut causing a jerk.
Engine is a b16 on ITB's
Any ideas?
Engine is a b16 on ITB's
Any ideas?
- Thu Apr 19, 2018 10:29 am
- Forum: s300 / SManager
- Topic: TPS issue?
- Replies: 4
- Views: 1216
Re: TPS issue?
Attached is a short datalog, and the calibration.
The cal is work in progress, just a rough starting point to get it up and running.
You can see the issue I'm having tho
The cal is work in progress, just a rough starting point to get it up and running.
You can see the issue I'm having tho
- Wed Apr 18, 2018 2:42 pm
- Forum: s300 / SManager
- Topic: TPS issue?
- Replies: 4
- Views: 1216
Re: TPS issue?
Fully closed 1, and fully open 100.
On idle, my map is 44kpa, i did enter 44 in the fully closed box, but TPS and load site still didnt match
On idle, my map is 44kpa, i did enter 44 in the fully closed box, but TPS and load site still didnt match
- Wed Apr 18, 2018 1:18 pm
- Forum: s300 / SManager
- Topic: TPS issue?
- Replies: 4
- Views: 1216
TPS issue?
Seem to be having an issue with my tps in s300, or I'm being stupid... anyway, i can set the minimum and maximum reading in the tps tab, and it reads 0-100%, perfect. The problem is the high lighted cells in the fuel and ignition tables don't match the datalog. For example, I'm cruising at 4% tps, a...
- Wed Aug 12, 2009 10:32 am
- Forum: s300 / SManager
- Topic: Cant upload on to S300. Please Help
- Replies: 7
- Views: 3335
Cant upload on to S300. Please Help
Noob question here.
When i try and upload a calibration on to my ecu it comes up with 'error' :?
It says its 'online' in the bottom left corner, so not sure what to do.
Any help would be great
When i try and upload a calibration on to my ecu it comes up with 'error' :?
It says its 'online' in the bottom left corner, so not sure what to do.
Any help would be great