Search found 507 matches
- Fri Nov 10, 2023 8:13 am
- Forum: S300 Calibrations
- Topic: b20 vtec turbo overheating on highway
- Replies: 17
- Views: 7715
Re: b20 vtec turbo overheating on highway
Can you post a datalog and your calibration?
- Fri Feb 25, 2022 7:49 am
- Forum: FlashPro Calibrations
- Topic: Help with 08 Civic Si Tune
- Replies: 18
- Views: 2957
Re: Help with 08 Civic Si Tune
Factory o2 is wide band so as long as its functional, you don't need another sensor
- Wed Feb 16, 2022 4:15 pm
- Forum: FlashPro Calibrations
- Topic: Help with 08 Civic Si Tune
- Replies: 18
- Views: 2957
Re: Help with 08 Civic Si Tune
New file attached
- Wed Feb 16, 2022 4:12 pm
- Forum: FlashPro Calibrations
- Topic: Help with 08 Civic Si Tune
- Replies: 18
- Views: 2957
Re: Help with 08 Civic Si Tune
Were these pulls all done back to back? If so, you can really see the impact (heat soak) from the short intake: First pull IAT was ~48F, 4th pull IAT was ~91F At 91F the AF curve is pretty flat, but at 48F you have a massive spike around 5750. (ECT was similar throughout) I am going to adjust the IA...
- Wed Feb 16, 2022 2:26 pm
- Forum: FlashPro Calibrations
- Topic: Help with 08 Civic Si Tune
- Replies: 18
- Views: 2957
Re: Help with 08 Civic Si Tune
no problem.
Let me know how it goes.
Let me know how it goes.
- Tue Feb 15, 2022 1:25 pm
- Forum: FlashPro Calibrations
- Topic: Help with 08 Civic Si Tune
- Replies: 18
- Views: 2957
Re: Help with 08 Civic Si Tune
Just made a few changes.
Get me a long datalog with at least a couple good 3rd gear pulls
Get me a long datalog with at least a couple good 3rd gear pulls
- Wed Feb 09, 2022 3:05 pm
- Forum: FlashPro Calibrations
- Topic: Help with 08 Civic Si Tune
- Replies: 18
- Views: 2957
Re: Help with 08 Civic Si Tune
It needs some work, but its not bad.
No knocks. AFR stays mostly in the safe range during WOT.
Id prefer 3rd gear pulls to 1-2-3 but this is a start.
What was your concern?
No knocks. AFR stays mostly in the safe range during WOT.
Id prefer 3rd gear pulls to 1-2-3 but this is a start.
What was your concern?
- Mon Feb 07, 2022 10:26 pm
- Forum: FlashPro Calibrations
- Topic: Help with 08 Civic Si Tune
- Replies: 18
- Views: 2957
Re: Help with 08 Civic Si Tune
post the tune
- Thu May 20, 2021 10:05 am
- Forum: S300 Calibrations
- Topic: B18b1 turbo map
- Replies: 25
- Views: 20968
Re: B18b1 turbo map
map I found for LS-T, 1k injectors
- Sun Jun 18, 2017 11:19 pm
- Forum: KManager Display Templates
- Topic: Flash Pro Knock Display
- Replies: 0
- Views: 9750
Flash Pro Knock Display
This has becone my main display. It has your usual gauges with special emphasis on knock. Total Knock Count blown up wit smaller Knock Count by Cylinder plus current knock level. MAP in mbar. Blue/Green background, but this can easily be changed
- Tue Apr 04, 2017 9:43 pm
- Forum: FlashPro Calibrations
- Topic: Drop in power on each dyno run
- Replies: 3
- Views: 2822
Re: Drop in power on each dyno run
Knock level is 0 but knock retard and high counts? Cylinder 2 is your troublemaker.
- Sun Mar 12, 2017 2:14 pm
- Forum: S300 Calibrations
- Topic: BETTER GSR Tune - Dyno Tuned - 187whp
- Replies: 23
- Views: 30059
Re: BETTER GSR Tune - Dyno Tuned - 187whp
This car was tuned in Texas so elevation and temp are both going to be factors. Last I heard my old motor was still running well. Swapped out of the sedan I sold it in and into a stripped hatch.
- Wed Jan 25, 2017 9:18 pm
- Forum: S300 Calibrations
- Topic: B18c1 94 gsr
- Replies: 1
- Views: 2005
- Wed Jan 25, 2017 9:18 pm
- Forum: S300 Calibrations
- Topic: B18C N/A Basemap
- Replies: 9
- Views: 8223
- Thu Jun 30, 2016 9:46 pm
- Forum: K-Pro Calibrations
- Topic: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
- Replies: 31
- Views: 17088
Re: Base map upgrade needed. '02 k20a2, Random cat & 70mm exh, 550cc
The car ran MUCH better in the after pull. Whatever you did there, you should keep it. The lack of high RPM MAP pressure was killing your power. I made a few adjustments. This should suit you either way. As far as the manifold difference, I dont know how much difference you will see pre-turbo, but I...