here is my d16y8 with td04hl-19t turbo.
small turbo and only 300whp.
Search found 12 matches
- Fri Jan 28, 2022 10:49 am
- Forum: S300 Calibrations
- Topic: D16y8 with turbo base map??
- Replies: 1
- Views: 4301
- Sat Dec 06, 2014 12:07 pm
- Forum: S300 Calibrations
- Topic: D16z6 with Y8 head car seems extremely lazy.may be timing?
- Replies: 3
- Views: 3009
Re: D16z6 with Y8 head car seems extremely lazy.may be timing?
That was alot of timing.
If you run the y8 camshaft you must use the y8 cam gear.
Here is my tune:
viewtopic.php?f=20&t=18174
If you run the y8 camshaft you must use the y8 cam gear.
Here is my tune:
viewtopic.php?f=20&t=18174
- Sat Dec 06, 2014 12:06 pm
- Forum: S300 Calibrations
- Topic: D16Y8 + Greddy 19T turbo kit = 299WHP
- Replies: 1
- Views: 4384
D16Y8 + Greddy 19T turbo kit = 299WHP
D16y8 Stock head with Delta 272-2 Adjustable cam gear, but left at 0' (y8 timming) Eagle rods Srp turbo pistons for a6 = 9,8:1 Oem bearings Crower valve springs 62mm VTI throttlebody Thermal gasket Ebay/Skunk2 copy intake manifold Greddy turbokit forl 96-98 civic Td04hl-19t 8.5cm Turbo 3″ eksos fra ...
- Fri Mar 29, 2013 6:56 am
- Forum: S300 Calibrations
- Topic: d16y8 stock
- Replies: 12
- Views: 6745
Re: d16y8 stock
Middel line of the 3 on the crank gear.
Look in any car manual to see it :)
Look in any car manual to see it :)
- Fri Mar 29, 2013 5:32 am
- Forum: S300 Calibrations
- Topic: d16y8 stock
- Replies: 12
- Views: 6745
Re: d16y8 stock
Use the z6 map.
Set timming in hondata to 12
And turn dizzy until it lines up with the middel line on the crank when useing a timminglight.
My car is from germany, but every y8 is made in the USA.
Btw i'm from norway
Set timming in hondata to 12
And turn dizzy until it lines up with the middel line on the crank when useing a timminglight.
My car is from germany, but every y8 is made in the USA.
Btw i'm from norway
- Fri Mar 29, 2013 12:24 am
- Forum: S300 Calibrations
- Topic: d16y8 stock
- Replies: 12
- Views: 6745
Re: d16y8 stock
The Hondata thred is mine :( Do not change mecanical timming. I had to widen the holes in the dizzy so i could clock it more towards the firewall. Then you manage to time it to 12' degree. Use the d16z6 base map and you are ok. The y8 head likes a few degree less timing so you could altert the map s...
- Fri Aug 26, 2011 12:12 pm
- Forum: S300 Calibrations
- Topic: Built D16y8
- Replies: 1
- Views: 1684
Built D16y8
This is a streetmap that my tuner made we are waiting to get Dyno time, but it works out great. and car pull hard. Spec: D16y8 Eagle rods SRP Pistons 8.8:1 Cam gear retarded 2 degree Stock head,cam,valve springs. Presission 550cc Walbro fuel pump Dizzy almost at center timmend to 12' in hondata and ...
- Sun Jul 24, 2011 1:12 am
- Forum: S300 Calibrations
- Topic: d16y8 turbo stock motor map 7psi
- Replies: 2
- Views: 2740
Re: d16y8 turbo stock motor map 7psi
have you made this yourself or is it made on a Dyno?
There is some high numbers on the timming that i'm unsure of, but since it is a y8 can be right:)
Only asking sinc3 i do not know. and this is the first d16y8 map i have seen :)
There is some high numbers on the timming that i'm unsure of, but since it is a y8 can be right:)
Only asking sinc3 i do not know. and this is the first d16y8 map i have seen :)
- Wed Dec 02, 2009 2:03 pm
- Forum: s300 / SManager
- Topic: Learning to Map - how does this look so far?
- Replies: 7
- Views: 4619
- Wed Dec 02, 2009 1:57 pm
- Forum: S300 Calibrations
- Topic: D16y8 timing
- Replies: 4
- Views: 5557
- Wed Dec 02, 2009 1:52 pm
- Forum: S300 Calibrations
- Topic: D16Y8 Basemap
- Replies: 1
- Views: 3355
- Tue Jun 30, 2009 1:44 pm
- Forum: S300 Calibrations
- Topic: Basemap for D16y8?
- Replies: 0
- Views: 2469
Basemap for D16y8?
I have a bonestock D16y8 with mods, but i'm after a stock timming map. Should i take the d16z6 and rais timming up from 16* to 21.5* and use that. Why is there no info on d16y8? They say that it is 12* timming , but to get this on the stock position on d16y8 i have to raise the timing to 21.5*. If i...