Search found 13 matches
- Thu Oct 29, 2009 8:53 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Cam angle tabs
- Replies: 6
- Views: 4268
- Thu Oct 29, 2009 8:47 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Fuel compensation by gear
- Replies: 3
- Views: 3333
Yes, it is possible. As a side note, I recall in out testing that changing the dyno ramp rate from very slow to very fast did not change the AF. Well I havent dynoed my car yet, but I did fully street tune it 3rd gear. However 1st gear is lean, 2nd still leaner than third but richer than 2nd, 3rd p...
- Tue Oct 27, 2009 2:10 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: knock retard
- Replies: 0
- Views: 2090
knock retard
Anyway to remove knock retard? My knock sensor is faulty and I get a circuit malfunction. Its almost impossible to tune with the knock retard changing constantl depending on gear and rpm
- Mon Oct 26, 2009 11:01 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Cam angle tabs
- Replies: 6
- Views: 4268
Cam angle tabs
why is it that on kpro you have the vtc tabs every 10 cam angle and ours goes from 15 to 30 instead of having 10 and 20? Is there anyway you guys can change the tabs ?
- Mon Oct 26, 2009 10:56 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: lambda overlay
- Replies: 2
- Views: 2627
- Sun Oct 25, 2009 11:24 am
- Forum: FlashPro Manager
- Topic: Idle target AFR adjustment and fuel compensation by gear?
- Replies: 10
- Views: 6756
- Sat Oct 24, 2009 8:29 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: IAT compensation
- Replies: 1
- Views: 2133
- Sat Oct 24, 2009 8:25 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: lambda overlay
- Replies: 2
- Views: 2627
lambda overlay
can you make it so that the suggested fuel change be used from the wideband input? I dont have a primary sensor anymore.
thank you.
thank you.
- Sun Oct 11, 2009 12:16 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Feature request
- Replies: 7
- Views: 4442
- Sun Oct 04, 2009 4:11 pm
- Forum: FlashPro Manager
- Topic: FlashPro Manager V1.1.0.9 beta
- Replies: 31
- Views: 17483
- Sat Oct 03, 2009 11:00 am
- Forum: Hondata News
- Topic: Low temperature thermostats
- Replies: 2
- Views: 24249
- Mon Sep 28, 2009 9:28 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Using sec o2 wideband input
- Replies: 14
- Views: 6710
Using sec o2 wideband input
I have a question, I have the stock sensor disconected but the wideband voltage says 5v on flashpro. I even disconnected the white plug where you say to tap into and it still says 5v. Isnt the voltage supposed to be at 0 with no sensors connected? I am trying to install an aem eugo but when I tap it...
- Fri Nov 14, 2008 1:56 am
- Forum: K-Pro / KManager
- Topic: erratic behavior
- Replies: 1
- Views: 1526
erratic behavior
I have an 06 rsx with a custom kal. I have been running this kal for a few months now. All of a sudden my car bogs during idle randomly. Today I was able to hook up the laptop but wasnt able to save the datalog that showed the problem. But I was able to review it for a while before my laptop died. W...