Search found 13 matches
- Tue Oct 20, 2015 11:22 am
- Forum: K-Pro / KManager
- Topic: KPro / KManager requests
- Replies: 146
- Views: 831677
Re: KPro / KManager requests
2 requests 1. I am desperately needing a delay function added to the Nitrous fuel & ign tables that I am using for water methanol injection. I spray 45GPH (2835cc/min) worth of 80% methanol to water in 2 stages (20gph then 25gph). What is happening is that the computer removes fuel before the WM...
- Fri Feb 06, 2015 8:48 am
- Forum: K-Pro / KManager
- Topic: Lean protection not engaging
- Replies: 5
- Views: 3066
Re: Lean protection not engaging
I am going to attempt stepping down my injection from 45gph to around 34gph at the same mixture in hopes this becomes easier to tune and hopefully lean protection will start working. My theory is that there is/was so much meth that when lean protection was activated the nitrous controls were still a...
- Tue Feb 03, 2015 7:46 am
- Forum: K-Pro / KManager
- Topic: Lean protection not engaging
- Replies: 5
- Views: 3066
Re: Lean protection not engaging
I tuned it on 91 before the water meth quite conservatively around 11.5AFR which is about as low as the oem wideband can read. Then the water meth comes on and I have to remove fuel to keep it around 11.7AFR. I spray so much that if I don't remove that much fuel it goes ultra rich and falls on its f...
- Mon Feb 02, 2015 2:53 pm
- Forum: K-Pro / KManager
- Topic: Lean protection not engaging
- Replies: 5
- Views: 3066
Re: Lean protection not engaging
I spray 45GPH (2,835cc) worth of 76% methanol to water mix under boost which is why it removes so much fuel. That is why I need the nitrous controls to deactivate upon leancut. I never used to have an issue until now and I'm not sure if something changed with the way Kpro handles lean protection or ...
- Fri Jan 30, 2015 11:57 pm
- Forum: K-Pro / KManager
- Topic: Lean protection not engaging
- Replies: 5
- Views: 3066
Lean protection not engaging
Attached is my kal and kdl for my water meth injected m62 powered k24. Look how lean it gets and does not stop regardless of my settings that used to work. I have tried clearing security and reloading the map which made no difference.
- Fri Jan 30, 2015 12:30 pm
- Forum: K-Pro / KManager
- Topic: KManager difficult to use/see since 4.0.6
- Replies: 5
- Views: 3159
Re: KManager difficult to use/see since 4.0.6
I have another question/issue as well which I can start another thread for if need be. I run ALOT of water meth. I don't know if this has always been an issue or if I am only noticing it now that I am spraying so much methanol at once to keep my overspun m62 cool. When lean protection engages and pu...
- Thu Jan 29, 2015 4:55 pm
- Forum: K-Pro / KManager
- Topic: KManager difficult to use/see since 4.0.6
- Replies: 5
- Views: 3159
Re: KManager difficult to use/see since 4.0.6
If you change the resolution, does it appear normally? Changing the resolution doesn't change how Kmanager is displayed it just makes everything larger. However in display settings I can change the scaling that is built into Windows 8 and turn it down to an unusable 125% like shown here. I run at 2...
- Wed Jan 28, 2015 6:39 pm
- Forum: K-Pro / KManager
- Topic: KManager difficult to use/see since 4.0.6
- Replies: 5
- Views: 3159
KManager difficult to use/see since 4.0.6
Ever since I updated from KManager v4.0.4 to 4.0.6 the display and layout is all messed up. Take a look at the attached screen shot. I am running a 3200x1800 resolution on my brand new laptop which is VERY helpful when tuning since I can fit everything on the screen (and the reason I bought it), but...
- Fri Jan 23, 2015 12:24 pm
- Forum: K-Pro / KManager
- Topic: aem uego 30-4100 fluctuation
- Replies: 7
- Views: 3823
Re: aem uego 30-4100 fluctuation
You have the 30-4100 digital input as a preset in kmanager, http://honda-tech.com/engine-management-tuning-124/s300-v3-plx-wideband-digital-input-aim-mxl-wiring-custom-mounting-ek-3203138/#post49772904 Is there any truth to Post #20 from the link above stating that the blue serial wire can go to &q...
- Fri Sep 23, 2011 8:38 am
- Forum: K-Pro / KManager
- Topic: KManager V3.0.3
- Replies: 46
- Views: 25784
Re: KManager V3.0.0
Very cool I am happy to see this. Will it only work with Kpro v3 or just with the new kmanager and the aftermarket wideband hooked up to the ELD like the old kpro allowed for datalogging?
- Thu Sep 22, 2011 8:10 pm
- Forum: K-Pro / KManager
- Topic: KManager V3.0.3
- Replies: 46
- Views: 25784
Re: KManager V3.0.0
With Kpro v3 or with the Kmanager update does that give us the ability to datalog the OEM wideband and an aftermarket wideband like an AEM at the same time while retaining the closed loop & wideband functionality?
- Sat Dec 06, 2008 1:05 am
- Forum: K-Pro / KManager
- Topic: Kswapped w/ Kpro & Wat/meth on Nitrous Controls
- Replies: 1
- Views: 1738
Kswapped w/ Kpro & Wat/meth on Nitrous Controls
I enabled nitrous 1, I plugged into E29 for Arming input and E21 for Arming output and uploaded the changes to the ecu. Flipping the switch does not change anything that I can see and I am looking in the tables under N20 Arm and it stays at Off. I have tried inverting both and no change other than i...
- Sun Nov 30, 2008 7:36 pm
- Forum: K-Pro / KManager
- Topic: Kswapped w/ Nitrous Controls 4 Water/Meth Inj
- Replies: 1
- Views: 1930
Kswapped w/ Nitrous Controls 4 Water/Meth Inj
Alright I have a K24a2/JRSC swapped 98 DC4 Integra with water/meth system (no nitrous). I am running the Hybrid Racing dash harness that plugs into my Kpro'd PRB ecu using the white plug E. All of the input/outputs listed here have no wires or pins in the plug for them. http://hondata.com/images/kpr...