Search found 9 matches
- Thu Jul 18, 2019 2:08 am
- Forum: FlashPro Calibrations
- Topic: Euro FN2 Datalogs (poor experience with a Hondata dealer)
- Replies: 6
- Views: 2070
Re: Euro FN2 Datalogs (poor experience with a Hondata dealer)
Just wanted to update this thread and say a big thanks for Kyle @ EFICU, he has checked things over for me and even improved a few things. Communications and response from him is second to none and he has explained everything he has done and the reasoning. Give this guy a shout if you need any mappi...
- Wed Jul 10, 2019 1:54 am
- Forum: FlashPro Calibrations
- Topic: Euro FN2 Datalogs (poor experience with a Hondata dealer)
- Replies: 6
- Views: 2070
Re: Euro FN2 Datalogs (poor experience with a Hondata dealer)
What dealer was this? Rather not post any names or bad mouth anyone. The map may be spot on, its just the fact it felt like he had very little interest in doing the map AFTER I had paid. I would send a datalog, hear nothing, leave it a few days, then chase it up, hear nothing, then get an email &qu...
- Wed Jul 10, 2019 1:33 am
- Forum: FlashPro Calibrations
- Topic: Euro FN2 Datalogs (poor experience with a Hondata dealer)
- Replies: 6
- Views: 2070
Re: Euro FN2 Datalogs (poor experience with a Hondata dealer)
Hi, Would someone be kind enough to check a couple of my datalogs? I've had an etune completed by a Hondata dealer (no names), and communication was fine prior to agreeing to the work, however, once I paid communications were poor at best. I was given a base map and 4 revisions (after constantly ch...
- Tue Jul 09, 2019 4:04 am
- Forum: FlashPro Calibrations
- Topic: Euro FN2 Datalogs (poor experience with a Hondata dealer)
- Replies: 6
- Views: 2070
Euro FN2 Datalogs (poor experience with a Hondata dealer)
Hi, Would someone be kind enough to check a couple of my datalogs? I've had an etune completed by a Hondata dealer (no names), and communication was fine prior to agreeing to the work, however, once I paid communications were poor at best. I was given a base map and 4 revisions (after constantly cha...
- Mon Jul 08, 2019 4:38 am
- Forum: FlashPro Calibrations
- Topic: Fan temperature setting problems
- Replies: 3
- Views: 1244
Re: Fan temperature setting problems
Hi,
Thanks ... but my ECT2 numbers are all over the place and ECT2 doesn't seem to plot properly in the chart (using flashpro manager 3.3.8.0)
Thanks ... but my ECT2 numbers are all over the place and ECT2 doesn't seem to plot properly in the chart (using flashpro manager 3.3.8.0)
- Sun Jul 07, 2019 8:00 am
- Forum: FlashPro Calibrations
- Topic: Fan temperature setting problems
- Replies: 3
- Views: 1244
Fan temperature setting problems
Hi, I've just been testing the fans on my Euro FN2 by letting it idle until the ECT is high enough for them to kick in. In my calibration the 'Radiator fan on' temp is set to 199 F and the 'Radiator fan off' temp is set to 194 F. When monitoring via the Hondata app, it showed around 208/209 F before...
- Sun May 12, 2019 11:52 am
- Forum: FlashPro Manager
- Topic: FlashPro - Windows 10 - Registration problem (no internet connection)
- Replies: 1
- Views: 1339
Re: FlashPro - Windows 10 - Registration problem (no internet connection)
Answered my own question ... I'm actually running the Cisco Umbrella cloud service on both my internet connections and its picking that registration link up as 'proxied'
As a quick check, I connected my laptop to my phones internet connection, and it registered fine to all good!
As a quick check, I connected my laptop to my phones internet connection, and it registered fine to all good!
- Sun May 12, 2019 4:23 am
- Forum: FlashPro Manager
- Topic: FlashPro - Windows 10 - Registration problem (no internet connection)
- Replies: 1
- Views: 1339
FlashPro - Windows 10 - Registration problem (no internet connection)
Hi, Had a search around and found a few responses with what to try. Done the following so far ... 1. Tried 2 different laptops 2. Disabled defender 3. Tried a different internet connection 4. Removed hondata device and removed drivers ... then reinstalled flashpro 5. Tried a different email address ...
- Mon Mar 31, 2008 12:45 am
- Forum: K-Pro / KManager
- Topic: Low voltage problems but battery seems ok ?
- Replies: 1
- Views: 1351
Low voltage problems but battery seems ok ?
Had the KPro on for approx 6 months now. Car is 2 years old and is standard in every way except for an induction kit. Battery has not been relocated. About 2 weeks ago the engine light came on with the low voltage on crank daughter board error. After some initial investigations I reset the code. The...