Search found 79 matches

by peasly23
Thu Jul 01, 2010 2:26 pm
Forum: s300 / SManager
Topic: Closed loop cruising AF jumping w/Datalog
Replies: 9
Views: 3507

I put the same values as Spunkster.
by peasly23
Mon Jun 14, 2010 10:04 am
Forum: s300 / SManager
Topic: Vacuum guage and computer don't match.
Replies: 5
Views: 1641

While I appreciate the good suggestion, I cut the stock harness off and soldered the wires to the new one. Any other ideas?
by peasly23
Sun Jun 13, 2010 11:23 am
Forum: s300 / SManager
Topic: Vacuum guage and computer don't match.
Replies: 5
Views: 1641

Vacuum guage and computer don't match.

Really I've had this problem from the beginning. I have brand new Aeromotive vacuum/boost guage and my vacuum never seems to match my computer. Details: EBay purchased Motorola 3-bar MAP sensor. (3 prongs connected to stock map sensor wires) I can't remember what is wired where. Stock MAP sensor rem...
by peasly23
Sat Jun 12, 2010 6:34 am
Forum: s300 / SManager
Topic: Closed loop cruising AF jumping w/Datalog
Replies: 9
Views: 3507

Update... I upgraded again to the newest version, and still same problem. I searched for Spunkster's calibration, and entered his values under the "rate of change" section and things are running much better now.
by peasly23
Sat Jun 12, 2010 6:31 am
Forum: s300 / SManager
Topic: closed loop cruising problem.. need help please
Replies: 20
Views: 7873

You have to change the "rate of change" section to substantially lower numbers. They must have changed this section in the newer versions. Don't just guess... find Spunkster's calibration and use his numbers.

I'm pissed they changed this and didn't tell anyone.
by peasly23
Tue Jun 08, 2010 12:51 pm
Forum: s300 / SManager
Topic: Closed loop cruising AF jumping w/Datalog
Replies: 9
Views: 3507

EDIT... I thought I had already upgraded to latest version of software but I was still on 1.4.5. I must've upgraded on my other laptop and not this one. I will reupload the new code and retest. I will repost when this is finished.

Sorry in advance.
by peasly23
Tue Jun 08, 2010 12:44 pm
Forum: s300 / SManager
Topic: Closed loop cruising AF jumping w/Datalog
Replies: 9
Views: 3507

Closed loop cruising AF jumping w/Datalog

So I had posted in another thread the problem I am having with closed loop where the car jumps between rich/lean but is fine in open loop. This problem happened when upgrading to latest version of SManager. (My older version was 2 or three versions old - upgraded last in August or September 09) The ...
by peasly23
Mon Jun 07, 2010 4:08 pm
Forum: s300 / SManager
Topic: closed loop cruising problem.. need help please
Replies: 20
Views: 7873

I just did a couple of test drives and I am in fact having the same problem but only in closed loop. Everything was working fine before the upgrade to the newest version(s). My last update was before October 2009. My A/F ratios definately jump between richer and leaner while driving in closed loop o...
by peasly23
Thu Jun 03, 2010 11:30 am
Forum: s300 / SManager
Topic: SManager forced closing on Windows Vista
Replies: 18
Views: 3778

Can you post link for previous version?
by peasly23
Wed Jun 02, 2010 8:28 pm
Forum: s300 / SManager
Topic: closed loop cruising problem.. need help please
Replies: 20
Views: 7873

Just to get in on the subject... I am currently experiencing a similar problem that I am trying to narrow down. While I am at low load and slight throttle, my car slows/surges slightly and the air/fuel ratios go slightly richer, not leaner. I also don't have an older version of Smanager to test with.
by peasly23
Wed Jun 02, 2010 6:16 pm
Forum: s300 / SManager
Topic: SManager forced closing on Windows Vista
Replies: 18
Views: 3778

I am using 32-bit and have tried running as an administrator like you suggested.

Also, just in case it matters, I am a Network/Systems Administrator and deal with computers every day for a living.
by peasly23
Wed Jun 02, 2010 6:58 am
Forum: s300 / SManager
Topic: SManager forced closing on Windows Vista
Replies: 18
Views: 3778

I did uninstall and reinstall, but same result. Which registry keys do you add to Vista so that after I redo the uninstallation, I can go back and take out those keys if your uninstall didn't take them all out? I uninstalled 1.4.7.0 and reinstalled 1.3.8 and that old version worked just fine. Then I...
by peasly23
Tue Jun 01, 2010 6:58 am
Forum: s300 / SManager
Topic: SManager forced closing on Windows Vista
Replies: 18
Views: 3778

SManager forced closing on Windows Vista

Running newest version of SManager, and have reinstalled several times, but program crashes on startup. Problem signature: Problem Event Name: APPCRASH Application Name: SManager.exe Application Version: 1.4.7.0 Application Timestamp: 00000000 Fault Module Name: SManager.exe Fault Module Version: 1....
by peasly23
Mon Aug 17, 2009 10:10 am
Forum: s300 / SManager
Topic: Graph Display for MAP skewed...
Replies: 2
Views: 1070

I had to change it to 0 and 3 because it was still going off the chart. Now I see all vacuum and 20psi filling the whole graph correctly.

note: I hope this doesn't change my display settings in the "display" area with the guages.
by peasly23
Mon Aug 17, 2009 5:59 am
Forum: s300 / SManager
Topic: Graph Display for MAP skewed...
Replies: 2
Views: 1070

Graph Display for MAP skewed...

So I'm looking over my datalogs and am looking at my Manifold Pressure (MAP) which are in "/psi. Under my "Sensors > MAP" I have the display min and max set to "0" and "20" respectively. However, when looking at my graph, although the left side of the graph shows 0 - 20 along the y axis, when my MAP...