Search found 123 matches

by cardinal811
Thu Apr 02, 2009 10:48 pm
Forum: S300 Calibrations
Topic: In need of good map for H22a 550cc injector at 10psi
Replies: 16
Views: 6577

TWAT you mean blue top injectors

DSM 450"s?????????



If so I may get you some help it a bit
by cardinal811
Thu Apr 02, 2009 6:08 pm
Forum: S300 Calibrations
Topic: In need of good map for H22a 550cc injector at 10psi
Replies: 16
Views: 6577

What year of motor,ecu, chassis.

And did you check the knock limits

I'm no tune-R, I can do some adjustments but not going to council others as I'm not a pro at it
by cardinal811
Wed Apr 01, 2009 1:34 am
Forum: S300 Calibrations
Topic: Need a base for fully built b16 turbo w/ 750cc inj.
Replies: 1
Views: 2187

SIR please trash the WG, they do not work But the BOV you got a fine unit there Whats your location and if your close to Cinn Ohio I suggest your call total performance racing or http://www.trpcincy.com and ask ROB to schedule you a 3hr block on the dyno The best Tuner in the US and even "well PM me...
by cardinal811
Wed Apr 01, 2009 1:30 am
Forum: S300 Calibrations
Topic: Anyone got a base for H22a Euro-R?
Replies: 12
Views: 8634

Sway intake to a a USDM then come back

EURO R is now what you want, short eunner is cool and all but volume makes power.

GET RID OF THAT TRASH
by cardinal811
Wed Mar 25, 2009 3:05 am
Forum: S300 Calibrations
Topic: Need B18a1 stock calibration please??????
Replies: 2
Views: 2104

Or Stock ECU
by cardinal811
Tue Mar 24, 2009 1:49 am
Forum: s300 / SManager
Topic: boost level
Replies: 3
Views: 1738

NOT SAFE


depends on what your ignition advance is,
If your going to give advise back it up with some experience that you know.

Dont believe everything you read on the internet kids
by cardinal811
Tue Mar 24, 2009 1:44 am
Forum: S300 Calibrations
Topic: H22A 15 psi 1000cc injectors
Replies: 24
Views: 37940

superturboprelude wrote:HI GUYS WILL this be ok to use on my h22a4 built gt35r t4 wtih 1000cc 88mm cp pistons just to drive to the dyno at churches from san diego?
Yeah it fine and will get you around 33mpg


SRSLY
by cardinal811
Tue Mar 24, 2009 1:43 am
Forum: S300 Calibrations
Topic: H22A 15 psi 1000cc injectors
Replies: 24
Views: 37940

what boost is this new high HP map? Any chance you'll tune on e85 soon? 15-18creep above 7500rpm new turbo flows so good Actually it's a better turbo from the Holset H1C, 2.5in exhaust, eghey manifold I was running, now it's a Pt6262E with billet wheel, 3in exhaust and a eville140 1.75 sch10 manifo...
by cardinal811
Tue Mar 17, 2009 4:04 am
Forum: S300 Calibrations
Topic: In need of good map for H22a 550cc injector at 10psi
Replies: 16
Views: 6577

He could run my map and make injector adjustments and retard the timing for the base. BUT he needs a GM 3 bar I say screw the stock map, go get a 3 bar and make the adjustments as I stated above and head to a tuner. Or just get what I got in my sig and be rocking a baller map from a Well named Tuner...
by cardinal811
Tue Mar 17, 2009 3:59 am
Forum: S300 Calibrations
Topic: H22A 15 psi 1000cc injectors
Replies: 24
Views: 37940

I have a higher HP map that I can post

Hondata will you post as another Stickie

470whp and 366ftlbs of Torque
by cardinal811
Sun Feb 22, 2009 8:59 pm
Forum: S300 Calibrations
Topic: B18B1 Turbo map?????
Replies: 1
Views: 2114

Stock injectors will be maxed out @4psi, so why waste time and even then your risking detonation because they will shit out more and more on every cycle of the crank, you even have a upgraded fuel pump or a FPR to increase fuel, how about a map sensor that will read past 10psi?
by cardinal811
Thu Feb 12, 2009 1:29 pm
Forum: S300 Calibrations
Topic: Requesting boosted/built H22 calibration
Replies: 7
Views: 3103

es-squared wrote:word, thanks again
WORD? ? ? What
by cardinal811
Thu Feb 12, 2009 12:56 am
Forum: S300 Calibrations
Topic: Requesting boosted/built H22 calibration
Replies: 7
Views: 3103

Thanks man.. I thought they would be sufficient, what would you reccomend ? Are you talking about this thread? H22A 15 psi 1000cc injectors http://hondata.com/forum/viewtopic.php?t=8881 The one in the stickie column at the very top of the calibration forum. And injectors depends on your hp needs, b...
by cardinal811
Wed Feb 11, 2009 7:10 pm
Forum: S300 Calibrations
Topic: Requesting boosted/built H22 calibration
Replies: 7
Views: 3103

Re: Requesting boosted/built H22 calibration

My projects nearing completion.. and I'll be running 10lbs of boost, so if anyone has a setup close to my own, that would be greatly appreciated! :D Set up is as follows T3/T4 57trim .63ar 550cc injectors walbro 255 fuel pump skunk2 stage 2 cams darton mid sleeves 9:1 comp Very small injectors for ...
by cardinal811
Sat Feb 07, 2009 8:26 pm
Forum: S300 Calibrations
Topic: B16 with internalls + 780cc injectors + .50/.63
Replies: 35
Views: 12157

FIRST question throws me off. HOW MUCH BOOST DO YOU PLAN ON RUNNING. Should of said, how much WHP are you searching for. Guys you can have a 100whp car with 25psi of boost with the ignition retarded to the max. Depends on the cfm of the turbo and the ignition adavance. Anytime some one just asks HOW...