post your suggestions for new features here
I wish hondata had controls for fading to secondary injectors as RPMs rise.
Also input for other sensors like a pyrometer (heck 4 pyrometers if we're wishing) and hal sensors to monitor wheelspin.
Search found 50 matches
- Tue Apr 14, 2009 5:08 am
- Forum: s300 / SManager
- Topic: Smanager wish list
- Replies: 150
- Views: 164756
- Tue Mar 31, 2009 7:22 am
- Forum: s300 / SManager
- Topic: dataloging AF cuts out at high rpm
- Replies: 4
- Views: 2968
- Sun Mar 29, 2009 5:10 pm
- Forum: s300 / SManager
- Topic: dataloging AF cuts out at high rpm
- Replies: 4
- Views: 2968
dataloging AF cuts out at high rpm
After about 6000RPM datalogging of AF cuts out. Hondata continues to datalog everything else except AF.
I've got an Innovate LC1 connected to D10 ELD.
I've got an Innovate LC1 connected to D10 ELD.
- Wed Apr 02, 2008 12:24 pm
- Forum: s300 / SManager
- Topic: I need help with a situation
- Replies: 1
- Views: 1963
what gas are you burning? pump gas doesn't burn fast enough in this size engine to make good power over 9000 RPM Im not familiar with that cam but most do not make power that high in the RPM band... 310 injectors are good for around 200HP at 80% duty. Injectors are unreliable at max duty cycle... 80...
- Wed Apr 02, 2008 6:14 am
- Forum: s300 / SManager
- Topic: My S300 keeps disconnecting!
- Replies: 7
- Views: 6211
Hey, I was having this same problem. It turned out to be carbon fouled plugs... can you elaborate more about this? are you saying your fouled spark plugs cause the hondata disconnections? are you running kinda rich? I run ITBs and they idle around 10 AF. I was experiencing the datalogging cutting o...
- Tue Apr 01, 2008 1:14 pm
- Forum: s300 / SManager
- Topic: ECT temps reading wrong in hondata
- Replies: 12
- Views: 10128
- Tue Apr 01, 2008 7:00 am
- Forum: s300 / SManager
- Topic: My S300 keeps disconnecting!
- Replies: 7
- Views: 6211
- Tue Apr 01, 2008 6:57 am
- Forum: s300 / SManager
- Topic: red light on s300, datalogging stops after 10 minutes
- Replies: 12
- Views: 6322
Ok this issue has fixed itself. The only thing I can think of is that my idle with these ITBs is in the 10.5 range. I was letting the car idle and datalogging which would quit after about 10 minutes. The rich idle was carbon fouling the plugs. Once I got her out on the road and opened the throttle u...
- Tue Apr 01, 2008 6:50 am
- Forum: s300 / SManager
- Topic: ECT temps reading wrong in hondata
- Replies: 12
- Views: 10128
does any one know which sending unit on a d series that hondata reads from? is it the same one as the dash gauge reads from ? i doubt its the sending unit but i have to start some where. hondata reads the temp from the ECT sensor on the thermostat housing part 12 on this page https://www.hondaparts...
- Fri Mar 28, 2008 10:42 am
- Forum: S300 Calibrations
- Topic: sad day on the dyno please help
- Replies: 7
- Views: 6949
- Wed Mar 05, 2008 2:05 pm
- Forum: s300 / SManager
- Topic: red light on s300, datalogging stops after 10 minutes
- Replies: 12
- Views: 6322
- Wed Mar 05, 2008 12:04 pm
- Forum: s300 / SManager
- Topic: red light on s300, datalogging stops after 10 minutes
- Replies: 12
- Views: 6322
Who socketed the ECU? What spark plugs are you using and what ignition setup do you have? socketing was done at hondata, ignition is stock coil and dizzy, spark plugs are NGK ZFR5FGP I noticed you asked this same question about spark plugs in another thread with a similar (stops datalogging after 1...
- Wed Mar 05, 2008 7:25 am
- Forum: s300 / SManager
- Topic: red light on s300, datalogging stops after 10 minutes
- Replies: 12
- Views: 6322
- Wed Mar 05, 2008 7:24 am
- Forum: s300 / SManager
- Topic: red light on s300, datalogging stops after 10 minutes
- Replies: 12
- Views: 6322
- Mon Mar 03, 2008 11:51 am
- Forum: s300 / SManager
- Topic: red light on s300, datalogging stops after 10 minutes
- Replies: 12
- Views: 6322
red light on s300, datalogging stops after 10 minutes
My laptop connects and datalogs fine for about 10 minutes. I have to unplug the usb cable or reset the ecu to get it to start datalogging again.