Hondata

I was looking at possibly getting one of these race clusters. I was wondering which one hondata would recommend for the best compatibility with the s300 v3. I would pretty much like to remove my cluster and just run the display. Do these show fuel levels? And i would like to see mph rpm coolant temp...

I have IOS and the hondata app. Was trying to see if there is a way to see ethanol through it, or can you add it in an upcoming update.

The cams are pro1s. Ill check the battery, its a odyssey battery that sat all winter.

Good morning, Car is 00 civic si, V3 hondata, turbo E85 Flexfuel ID2000. Anyways the problem i noticed was when i turned my headlights the run would run richer. I have attached my map and datalogs. I got a base map from a reputable tuner to start tuning my car from. Iv read it could be the dead times.

I just solved my problem over the weekend. My Hondata 4 bar went bad. As my car was just on but not running the sensor was reading -22. plugged in a good one and read 0.2 car started up and ran smooth. i can post a video later of it reading wrong if anyone wants to see it.

Since the car is a 2000 obd2b there is no tach wire at the dizzy. Hondata didnt explain that in the instructions. You need to take the green wire from inside the car and i just T'd mine into the rpm wire which is blue and goes to your cluster.

i had already done that in the past so it was set. However i would give it gas and it would die instantly or slowly die on its own. Something is weird electrical im assuming but everything looks fine. Later that night it did start up and stay running and i was able to drive it around the block. I tr...

So came back today started and died with IAC unplugged. What would be causing interference with my injectors im guessing.

So last night i was messing with my car and tried to start it and it shut off. This time however, i heard a loud humming coming from my engine. Tracked it down to the IAC. Unplugged it and started car held throttle and it stayed running. Very strange we will see what happens, going to leave it unplu...

Tried my cpr box in another car worked fine. Also tried my ecu in his car worked fine. Changed my battery to a full size one still does it. I'm so confused at so why the cpr causes my car to run lean and die and the dizzy will run fine. Any ideas on what to check with a multi meter? I'd really not l...

i currently dont have anyones car to try my box in.

That is not my current tune, this is it. once warmed up idles 14.7.

use the s300 to read what code its throwing. Inside smanager there is a error code button that will tell you when your connected.

here is a video with cpr starting and dieing.

https://vimeo.com/106877046

this video all i did was put the stock ignition back in and changed the cpr setting. stays running.

https://vimeo.com/106877172

Im currently uploading new videos, i just put the stock ignition back in and only changed the cpr setting as proof that its the cpr.

Car: 200 Honda civic Si Engine: B18c1/B16 piston,rod turbo motor ECU: P28 w/s300 V3 chipped by Slowmotion Motorsports Tuned by: Phearable Harness: stock si harness. boomslang jumper harness. ID2000 clips and extended IAT to obd1 location Battery relocated to trunk 2 gauge power wire, 2 gauge ground ...