Hondata

Wanted to know, what the overrun fuel cutoff do?
Sorry for the question
Thank You for your time

where is the iac?

Thanks for fast response

after cold start the car idle well then it goes to 3000 and back to 800 till the engine is warm (normal temp). then it idles great.

Could someone give me some pointers?
Thanks

What is the invert purge valve? Sorry for the question i'm new to this.

I'm using version 1.1.1

After installation of the s300 my shift light start blinking, I connected an A/F meter that reads RPM and the RPM went to 50,000, 66,000 etc. Thats why my shift light blinks.

Went to a dyno and the rpm went wild.

Can someone tell me how to solve this problem?

Thank You for your help.

When I look at the maps of ignition timming in the boost columns 11-16 the timming is increasing when rpm increases it goes up to 21.75 is that normal?

Thank You for your help

I don't change anything.
I'm reading the A/F with the usb connected 11.5 and 12.3 with the laptop off and no usb.
Have to check the close loop I think is disable

I tune my car to run 11.5 A/F, but when I disconnect the laptop the car Runs lean 12.3

Thank You for you r help

I don't know how it works, but I'm having the same problem.

If someone knows please post.

Need help, on how to set the tps in 0 at closed throttel.

What is the difference between low speed fuel and high speed fuel?

What is the difference between low speed ignition and high speed ignition?

Any help would be apreciated.

Spunkster my car compression was 180, 182, 185, 179. but still the vacuum is in 15

Spunkster i'm using a stock map sensor. My car is forced induction.

What is alpha-n and where i can find it?