Search found 11 matches
- Wed Oct 09, 2019 4:35 pm
- Forum: K-Pro / KManager
- Topic: Flickering of CEL-No Knock
- Replies: 13
- Views: 1812
Re: Flickering of CEL-No Knock
Thanks, I'll see what he says. Sad thing is it's so intermittent. Didn't do it at all today
- Tue Oct 08, 2019 7:29 pm
- Forum: K-Pro / KManager
- Topic: Flickering of CEL-No Knock
- Replies: 13
- Views: 1812
Re: Flickering of CEL-No Knock
Ok, i attached my cal, and the two datalogs when i was pretty much idle and was getting the flashing CEL
- Tue Oct 08, 2019 2:51 pm
- Forum: K-Pro / KManager
- Topic: Flickering of CEL-No Knock
- Replies: 13
- Views: 1812
Re: Flickering of CEL-No Knock
Ok, when i turn the key to accessory I see about 11 vdc. When I start the car it dips to about 9-10 vdc, and when it starts running its seeing around 14 vdc. Think its the battery?
- Tue Oct 08, 2019 10:09 am
- Forum: K-Pro / KManager
- Topic: Flickering of CEL-No Knock
- Replies: 13
- Views: 1812
Re: Flickering of CEL-No Knock
Also it came back on my stock ECU. A solid cel. P600 and a lean bank code. (obviously lean bank due to stock ecu)
- Tue Oct 08, 2019 9:38 am
- Forum: K-Pro / KManager
- Topic: Flickering of CEL-No Knock
- Replies: 13
- Views: 1812
Re: Flickering of CEL-No Knock
Do you happen to know which pins?
- Tue Oct 08, 2019 8:31 am
- Forum: K-Pro / KManager
- Topic: Flickering of CEL-No Knock
- Replies: 13
- Views: 1812
Re: Flickering of CEL-No Knock
So I checked my battery and it was at 12.8 bolts after sitting all day. I double-checked all of my connectors on the engine and didn't notice anything lose or odd. I put my stock prb ECU in and the car is not having the same symptoms. Is it possible it's either the ECU or kpro?
- Mon Oct 07, 2019 11:26 am
- Forum: K-Pro / KManager
- Topic: Flickering of CEL-No Knock
- Replies: 13
- Views: 1812
Re: Flickering of CEL-No Knock
I'll check battery, seems the most likely culprit.
The wiring, I have double checked all of my grounds already. The wiring harness is not modified at all. I'll double check all my plugs as well.
The wiring, I have double checked all of my grounds already. The wiring harness is not modified at all. I'll double check all my plugs as well.
- Mon Oct 07, 2019 7:16 am
- Forum: K-Pro / KManager
- Topic: Flickering of CEL-No Knock
- Replies: 13
- Views: 1812
Flickering of CEL-No Knock
2003 Acura RSX w/ k24/k20 engine. PND ECU w/kpro v2.0 only mod is injen CAI The car got tuned about a 2 months ago. Ran fine afterwards. about 2 weeks ago, i got a CEL. I went to read it and it said there was 1 code. but When i actually looked at the code it said there was nothing. I turned off car ...
- Tue Aug 20, 2019 3:16 pm
- Forum: K-Pro / KManager
- Topic: Reverse Lockout on the PND ECU
- Replies: 2
- Views: 1030
Re: Reverse Lockout on the PND ECU
Thank you
- Mon Aug 19, 2019 8:33 pm
- Forum: K-Pro / KManager
- Topic: Reverse Lockout on the PND ECU
- Replies: 2
- Views: 1030
Reverse Lockout on the PND ECU
I have repinned my PRB wire harness to accomodate a PND ECU with reverse lockout. It says with a PRB download it works. Does that mean when i choose the dropdown (vehicle type) if i choose PRB ECU, or does it mean the actual calibration, as i'd like to use a TSX basemap.
- Sun Aug 04, 2019 11:34 am
- Forum: K-Pro Calibrations
- Topic: knock of the Charts. k24/k20
- Replies: 3
- Views: 1769
knock of the Charts. k24/k20
Ok, Backstory. Something happened to old engine. Decided to build a Frank. k24A4 block stock tsx pistons/rods. New rings/Bearings etc. Old k20A2 Head PND ECU w/ver 2 KPRO Problem Knock. I set CEL to indicate Knock in kpro. It flickers quite a bit at idle, and if its not flicker slight acceleration o...