Search found 11 matches

by pandimus
Wed Oct 09, 2019 4:35 pm
Forum: K-Pro / KManager
Topic: Flickering of CEL-No Knock
Replies: 13
Views: 852

Re: Flickering of CEL-No Knock

Thanks, I'll see what he says. Sad thing is it's so intermittent. Didn't do it at all today
by pandimus
Tue Oct 08, 2019 7:29 pm
Forum: K-Pro / KManager
Topic: Flickering of CEL-No Knock
Replies: 13
Views: 852

Re: Flickering of CEL-No Knock

Ok, i attached my cal, and the two datalogs when i was pretty much idle and was getting the flashing CEL
by pandimus
Tue Oct 08, 2019 2:51 pm
Forum: K-Pro / KManager
Topic: Flickering of CEL-No Knock
Replies: 13
Views: 852

Re: Flickering of CEL-No Knock

Ok, when i turn the key to accessory I see about 11 vdc. When I start the car it dips to about 9-10 vdc, and when it starts running its seeing around 14 vdc. Think its the battery?
by pandimus
Tue Oct 08, 2019 10:09 am
Forum: K-Pro / KManager
Topic: Flickering of CEL-No Knock
Replies: 13
Views: 852

Re: Flickering of CEL-No Knock

Also it came back on my stock ECU. A solid cel. P600 and a lean bank code. (obviously lean bank due to stock ecu)
by pandimus
Tue Oct 08, 2019 9:38 am
Forum: K-Pro / KManager
Topic: Flickering of CEL-No Knock
Replies: 13
Views: 852

Re: Flickering of CEL-No Knock

Do you happen to know which pins?
by pandimus
Tue Oct 08, 2019 8:31 am
Forum: K-Pro / KManager
Topic: Flickering of CEL-No Knock
Replies: 13
Views: 852

Re: Flickering of CEL-No Knock

So I checked my battery and it was at 12.8 bolts after sitting all day. I double-checked all of my connectors on the engine and didn't notice anything lose or odd. I put my stock prb ECU in and the car is not having the same symptoms. Is it possible it's either the ECU or kpro?
by pandimus
Mon Oct 07, 2019 11:26 am
Forum: K-Pro / KManager
Topic: Flickering of CEL-No Knock
Replies: 13
Views: 852

Re: Flickering of CEL-No Knock

I'll check battery, seems the most likely culprit.
The wiring, I have double checked all of my grounds already. The wiring harness is not modified at all. I'll double check all my plugs as well.
by pandimus
Mon Oct 07, 2019 7:16 am
Forum: K-Pro / KManager
Topic: Flickering of CEL-No Knock
Replies: 13
Views: 852

Flickering of CEL-No Knock

2003 Acura RSX w/ k24/k20 engine. PND ECU w/kpro v2.0 only mod is injen CAI The car got tuned about a 2 months ago. Ran fine afterwards. about 2 weeks ago, i got a CEL. I went to read it and it said there was 1 code. but When i actually looked at the code it said there was nothing. I turned off car ...
by pandimus
Tue Aug 20, 2019 3:16 pm
Forum: K-Pro / KManager
Topic: Reverse Lockout on the PND ECU
Replies: 2
Views: 486

Re: Reverse Lockout on the PND ECU

Thank you
by pandimus
Mon Aug 19, 2019 8:33 pm
Forum: K-Pro / KManager
Topic: Reverse Lockout on the PND ECU
Replies: 2
Views: 486

Reverse Lockout on the PND ECU

I have repinned my PRB wire harness to accomodate a PND ECU with reverse lockout. It says with a PRB download it works. Does that mean when i choose the dropdown (vehicle type) if i choose PRB ECU, or does it mean the actual calibration, as i'd like to use a TSX basemap.
by pandimus
Sun Aug 04, 2019 11:34 am
Forum: K-Pro Calibrations
Topic: knock of the Charts. k24/k20
Replies: 1
Views: 766

knock of the Charts. k24/k20

Ok, Backstory. Something happened to old engine. Decided to build a Frank. k24A4 block stock tsx pistons/rods. New rings/Bearings etc. Old k20A2 Head PND ECU w/ver 2 KPRO Problem Knock. I set CEL to indicate Knock in kpro. It flickers quite a bit at idle, and if its not flicker slight acceleration o...