Search found 7 matches

by wesley_J
Mon Aug 12, 2019 3:23 pm
Forum: FlashPro Manager
Topic: Running very rich WOT
Replies: 13
Views: 3421

Re: Running very rich WOT

here is the graph after your changes looks like it helped a lot
by wesley_J
Wed Aug 07, 2019 12:53 pm
Forum: FlashPro Manager
Topic: Running very rich WOT
Replies: 13
Views: 3421

Re: Running very rich WOT

here it is this is after changing it by 5% across the board like you suggested.
by wesley_J
Thu Aug 01, 2019 11:10 am
Forum: FlashPro Manager
Topic: Running very rich WOT
Replies: 13
Views: 3421

Re: Running very rich WOT

yeah i've been changing the whole table by a little less than how much % its trimming.
by wesley_J
Wed Jul 31, 2019 6:30 pm
Forum: FlashPro Manager
Topic: Running very rich WOT
Replies: 13
Views: 3421

Re: Running very rich WOT

Here is a screenshot of my fuel trims starting at 1.0V the trim is 20% all the way to 3.4V 0%. I've tried reducing airflow along the voltages but it seems to not help or get worse. Reducing the airflow at 1 volt by 20% should bring it close to 0% if it was trimming that much right?
by wesley_J
Mon Jun 17, 2019 3:30 am
Forum: FlashPro Manager
Topic: Running very rich WOT
Replies: 13
Views: 3421

Re: Running very rich WOT

So say if the ecu trims -7% from 1.2-1.4volts I should add 7% afm flow through those voltages?
by wesley_J
Thu Jun 13, 2019 12:35 pm
Forum: FlashPro Manager
Topic: Running very rich WOT
Replies: 13
Views: 3421

Re: Running very rich WOT

My fuel trims in closed loop fluctuate from 2%to -7% short term and stay a solid -3% long term.
by wesley_J
Fri Jun 07, 2019 10:37 pm
Forum: FlashPro Manager
Topic: Running very rich WOT
Replies: 13
Views: 3421

Running very rich WOT

I have a 2013 si and recently uploaded the reflash tune along with a injen cold air intake. During datalogs the air fuel runs as rich as 10.99:1. I was originally going to adjust the WOT Lamda fuel table but hondata suggests not going over the stock 12.25 A/F which has me hesitant , but I also read ...