Search found 4 matches
- Thu Apr 25, 2019 11:02 am
- Forum: S2000 2006-2009 Americas/Europe/Asia
- Topic: Reviewing logs to determin safe AFR
- Replies: 11
- Views: 13450
Re: Reviewing logs to determin safe AFR
Knock control will change without knock, based on noise. If it is over 100% then you need to look for places in a datalog where it increases. Pull timing from those areas and if the knock control goes down, you're in the right area. If knock control does not change then it probably is mechanical no...
- Thu Apr 25, 2019 10:22 am
- Forum: Civic Si 2006-2011 Americas
- Topic: 2007 Civic Turbo Knock control 100%
- Replies: 3
- Views: 2685
Re: 2007 Civic Turbo Knock control 100%
Sure, Here is the tune and 2 datalogs from driving this morning. Thanks for the quick response
- Thu Apr 25, 2019 8:14 am
- Forum: S2000 2006-2009 Americas/Europe/Asia
- Topic: Reviewing logs to determin safe AFR
- Replies: 11
- Views: 13450
Re: Reviewing logs to determin safe AFR
For sure, interested to see how AEM responds! The tune is only a few hours old so i feel confident everything is still ok, I’ll probably check the plugs tomorrow. Thanks for your help Spunkster. I have the same exact problem with an AEM wideband gauge and sensor i bought in March 2019. I called AEM...
- Thu Apr 25, 2019 7:18 am
- Forum: Civic Si 2006-2011 Americas
- Topic: 2007 Civic Turbo Knock control 100%
- Replies: 3
- Views: 2685
2007 Civic Turbo Knock control 100%
I have a Boosted Civic R18 that has been dyno tuned and the AFR is spot on at 11.5 However i noticed in the flashpro data logs that as soon as i turn the engine on the knock control is at 100%. From what ive read online about how the knock system works on these cars is that at 0 % knock control the ...