Search found 13 matches

by latelifecrisis
Thu Dec 24, 2020 1:30 pm
Forum: FlashPro Manager
Topic: Flashpro cannot open calibrations
Replies: 2
Views: 1342

Re: Flashpro cannot open calibrations

Thanks, that did fix the issue. I don't understand why I had to load a beta version to get it to run, but the latest production version wouldn't work...
by latelifecrisis
Wed Dec 23, 2020 3:49 pm
Forum: FlashPro Manager
Topic: Flashpro cannot open calibrations
Replies: 2
Views: 1342

Flashpro cannot open calibrations

FP Serial FP-S2K-US-31742 running FP 3.6.5.0 I have attached the Flashpro About screen print out. The car recently had the cylinder head and short block replaced. ECU was not changed, but power to ECU was lost for several weeks. Also, ECU had been reset previously (after engine work a couple of time...
by latelifecrisis
Tue Jan 28, 2020 12:39 pm
Forum: FlashPro Manager
Topic: Base target lambda overlay on WOT compensation tables
Replies: 1
Views: 755

Base target lambda overlay on WOT compensation tables

I am running Flashpro 3.4.4.0. I understand how the current WOT compensation tables work. I have WOT based on MAP table enabled so with Flashpro uses the low and high cam WOT tables when I exceed the specified MAP based on engine rpm. I also understand the purpose of the target lambda overlay. Unfor...
by latelifecrisis
Sat Mar 23, 2019 7:19 am
Forum: FlashPro Manager
Topic: FlashPro Requests
Replies: 364
Views: 427879

Re: FlashPro Requests

Lambda overlay based on WOT tables instead of just the current three AFRs available.
by latelifecrisis
Fri Mar 22, 2019 1:55 pm
Forum: FlashPro Manager
Topic: Recommended target closed loop AFR for E15 gas
Replies: 3
Views: 2012

Recommended target closed loop AFR for E15 gas

In California where I live, we run 15% ethanol in our gas year round. The stoichomteric ratio for E15 gas appears to be 14.04. Any recommendations for using this as the target closed loop AFR versus 14.7? More specifically, is there any risk from running too lean at 14.7 while using E15 gas? Thanks.
by latelifecrisis
Thu Mar 07, 2019 8:14 pm
Forum: FlashPro Manager
Topic: AF Corrected value seems off
Replies: 20
Views: 12599

Re:

Hondata wrote: Tue Jan 26, 2010 10:27 am My point is that there are three vehicles, two are which produce the same results. A larger sample size needs to be made.

We'll add the correction to the software at some point.
But this never happened. Now you just say use uncorrected A/F for S2000's. Will it ever happen?
by latelifecrisis
Tue Mar 05, 2019 10:39 am
Forum: FlashPro Manager
Topic: Can't add attachments from laptop running Chrome
Replies: 3
Views: 1709

Re: Can't add attachments from laptop running Chrome

Yes, IE10 allows me to add attachment.

Guess I'll just use it when I need to post with attachments.
by latelifecrisis
Mon Mar 04, 2019 10:56 am
Forum: FlashPro Manager
Topic: Can't add attachments from laptop running Chrome
Replies: 3
Views: 1709

Can't add attachments from laptop running Chrome

When I go you add an attachment to a new post and hover over and click on the attachment tab at bottom of post, nothing happens and "javascript:void(0);" shows up on the bottom left of my screen.

I have java script enabled in browser and I am allowing pop ups.

Any ideas?
by latelifecrisis
Wed Feb 27, 2019 7:27 pm
Forum: FlashPro Manager
Topic: Open loop and lambda overlay
Replies: 3
Views: 1697

Re: Open loop and lambda overlay

Sorry, a 2007 S2000.
by latelifecrisis
Wed Feb 27, 2019 7:25 pm
Forum: FlashPro Manager
Topic: Resolving ignition parameters
Replies: 4
Views: 1830

Re: Resolving ignition parameters

Okay, thank you. One other question. If a knock situation happens when the ignition timing is being determined by: MBT Ignition + knock ignition limit - (knock retard x knock control) becuase it is less than MBT Ignition, does it make sense to lower the knock ignition limit table in the area of knoc...
by latelifecrisis
Wed Feb 27, 2019 8:52 am
Forum: FlashPro Manager
Topic: Resolving ignition parameters
Replies: 4
Views: 1830

Re: Resolving ignition parameters

In this specific case, yes. But I have noticed these discrepancies at other throttle positions.

Also, does knock retard on the log only refer to ignition retard related to knock sensitivity, the knock retard table or a sum of both?
by latelifecrisis
Tue Feb 26, 2019 11:18 pm
Forum: FlashPro Manager
Topic: Open loop and lambda overlay
Replies: 3
Views: 1697

Open loop and lambda overlay

I have forced open loop in my calibration - use MAP for WOT, set MAP to .1 bars for all rpms and set WOT low nad high A/F tables to 12.46. Can I still get suggested %fuel changes in my delta lambda tables to speed up fuel table tuning? I'm trying to tune in open loop to eliminate A/F oscillations du...
by latelifecrisis
Tue Feb 26, 2019 12:11 pm
Forum: FlashPro Manager
Topic: Resolving ignition parameters
Replies: 4
Views: 1830

Resolving ignition parameters

I am trying to resolve what seems to be a disagreement in ignition parameters. Attached is my calibration and datalog. At timestamp 15:00, the log shows the following (while idling) - RPM: 1000, IGN = 5, Knock Retard = 0, Limit = 19, K Control = 55% and MAP =29kPA. My calibration tables show the fol...