Search found 24 matches
- Sun Apr 14, 2019 6:16 pm
- Forum: General / Traction Control Manager Software
- Topic: CAN bus output, 120 ohm termination
- Replies: 3
- Views: 11219
Re: CAN bus output, 120 ohm termination
Thanks. I've got it working on the bench. In test mode on the TCS controller slip set to 20%, knob in position 5. Hondata TCS Live data reads the following Target slip 5 Position 30% Overslip 21.00% Overslip (smoothed) 0.00% ECU output 3.10 V No Error/faults On the CAN receiver side Target Slip; 30....
- Sat Apr 06, 2019 4:25 pm
- Forum: General / Traction Control Manager Software
- Topic: CAN bus output, 120 ohm termination
- Replies: 3
- Views: 11219
CAN bus output, 120 ohm termination
Does the CAN bus output work when running off USB? I'm working on my bench before setting up in the vehicle and I'm having issues with CAN communication.
Also does the Hondata TCS require 120 ohm termination?
Also does the Hondata TCS require 120 ohm termination?
- Sun Mar 10, 2019 5:15 pm
- Forum: General / Traction Control Manager Software
- Topic: Terminals and pin tool for TCS connector
- Replies: 2
- Views: 8756
Re: Terminals and pin tool for TCS connector
Thanks, ordered some from mouser.
- Tue Mar 05, 2019 8:19 pm
- Forum: General / Traction Control Manager Software
- Topic: Terminals and pin tool for TCS connector
- Replies: 2
- Views: 8756
Terminals and pin tool for TCS connector
Hi,
I need to connect to the CAN output of the TCS controller. Where can I get the wire terminals for the connector and the pin tool?
I need to connect to the CAN output of the TCS controller. Where can I get the wire terminals for the connector and the pin tool?
- Sat Dec 29, 2018 2:55 pm
- Forum: Traction Control with S300
- Topic: Noise in rear speed sensor
- Replies: 23
- Views: 21918
Re: Noise in rear speed sensor
I've got a new box from HAmotorsport. Signal may have improved some, spikes are lower at idle now. I took it for a drive and you still see rear wheels speeds spiking. Not sure what else to try here.
- Thu Dec 13, 2018 8:13 pm
- Forum: Traction Control with S300
- Topic: Noise in rear speed sensor
- Replies: 23
- Views: 21918
Re: Noise in rear speed sensor
last of it
- Thu Dec 13, 2018 8:11 pm
- Forum: Traction Control with S300
- Topic: Noise in rear speed sensor
- Replies: 23
- Views: 21918
- Thu Dec 13, 2018 8:09 pm
- Forum: Traction Control with S300
- Topic: Noise in rear speed sensor
- Replies: 23
- Views: 21918
- Thu Dec 13, 2018 8:02 pm
- Forum: Traction Control with S300
- Topic: Noise in rear speed sensor
- Replies: 23
- Views: 21918
Re: Noise in rear speed sensor
Photo dump
- Thu Dec 13, 2018 7:07 pm
- Forum: Traction Control with S300
- Topic: Noise in rear speed sensor
- Replies: 23
- Views: 21918
Re: Noise in rear speed sensor
Idling in 1st gear, car on jack stands. holding hydraulic hand brake on rear.
- Thu Dec 13, 2018 7:03 pm
- Forum: Traction Control with S300
- Topic: Noise in rear speed sensor
- Replies: 23
- Views: 21918
Re: Noise in rear speed sensor
data. I had my foot on the brake during the data collection.
Power is at A25 IGP1,
Ground is at A26 LG1
Spike to 7mph on rears during tip in.
Power is at A25 IGP1,
Ground is at A26 LG1
Spike to 7mph on rears during tip in.
- Thu Dec 13, 2018 6:03 pm
- Forum: Traction Control with S300
- Topic: Noise in rear speed sensor
- Replies: 23
- Views: 21918
- Wed Dec 12, 2018 7:01 pm
- Forum: Traction Control with S300
- Topic: Noise in rear speed sensor
- Replies: 23
- Views: 21918
Re: Noise in rear speed sensor
The USB light is always on or flickering even with the computer not connected. I put an oscilloscope on the power wire and nothing really stood out.
- Tue Dec 11, 2018 7:02 pm
- Forum: Traction Control with S300
- Topic: Noise in rear speed sensor
- Replies: 23
- Views: 21918
Re: Noise in rear speed sensor
I've cut 136 and 138. Not sure why but now with the ELD disconnected it still has the wheel speed noise. I've moved the power wire away from the ECM closer to battery directly and it did improve the noise with the TCS connect to D10. I need to extend wires to run directly to the battery, to see if t...
- Tue Dec 11, 2018 11:25 am
- Forum: Traction Control with S300
- Topic: Noise in rear speed sensor
- Replies: 23
- Views: 21918
Re: Noise in rear speed sensor
Not sure. Is a new unit and I haven't pulled the cover off yet. Also I didn't see that note in the instructions.
I'll check once I get home.
I'll check once I get home.