Search found 7 matches

by thomasn
Sun Jun 02, 2019 8:53 am
Forum: K-Pro / KManager
Topic: VTC issues code P0010
Replies: 14
Views: 536

Re: VTC issues code P0010

Had the same on my engine, the intake cam was physically fixed to 0° because the previous ECU managing the engine was not VTC ready (and intake cam was 20° off on the timing chain to simulate VTC so i had another code also).

So check under the pulley / inspect the mecanism ?
by thomasn
Wed May 29, 2019 11:34 am
Forum: K-Pro / KManager
Topic: AIM MXS Strada and Kpro Oil Pressure
Replies: 9
Views: 1036

Re: AIM MXS Strada and Kpro Oil Pressure

I developed a custom kpro can protocol for the AIM MXS Strada (non strada also). I added the Lambda reading since AIM decided to ignore this stream in the protocol. The 8 analog inputs are returned as raw mv values, and i added my calculations using Math channels for my custom sensors (fuel pressure...
by thomasn
Thu Mar 07, 2019 6:22 am
Forum: K-Pro / KManager
Topic: Fuel/Ignition compensation for AIT and ECT
Replies: 1
Views: 613

Fuel/Ignition compensation for AIT and ECT

Hi, lets say i have compensation for fuel and ignition for AIT, and the highest cell is 175°F. What happens at 200°F ? Interpolation from the 175°F value (so ~1.15x more), or it takes the 175°F value because it's the maximum ? The Kmanager documentation does not explain this (or maybe i did not noti...
by thomasn
Thu Jan 03, 2019 11:54 am
Forum: K-Pro / KManager
Topic: ECU grounding with insulated ECU casing
Replies: 2
Views: 311

Re: ECU grounding with insulated ECU casing

Oh ok, i was thinking the ECU needed to be grounded

Thanks
by thomasn
Wed Jan 02, 2019 7:09 am
Forum: K-Pro / KManager
Topic: ECU grounding with insulated ECU casing
Replies: 2
Views: 311

ECU grounding with insulated ECU casing

Hi, i'm running a K-Pro in an Ariel Atom, with rigid engine mounts : so i need to insulate the ECU case from the chassis with silent blocks to prevent it from breaking due to vibrations. I'll bolt a ground wire from the chassis to one of the ECU cover bolts, but i'm wondering if this ground wire has...
by thomasn
Thu Aug 30, 2018 12:24 pm
Forum: Applications
Topic: PRC Ecu - how to identify pre-facelift or facelift ?
Replies: 2
Views: 1218

Re: PRC Ecu - how to identify pre-facelift or facelift ?

Thanks for your help Spunkster :)

Have a good day
by thomasn
Thu Aug 30, 2018 1:41 am
Forum: Applications
Topic: PRC Ecu - how to identify pre-facelift or facelift ?
Replies: 2
Views: 1218

PRC Ecu - how to identify pre-facelift or facelift ?

Hi, i bought a used PRC ecu, to install a Kpro V4 and drive a K20a engine in an Ariel Atom. The company i send the stock ecu to, is asking if the ECU comes from a pre-facelift DC5 or facelift DC5. I don't know, and the seller of the ECU does not know :( So, the serial number is : 37820-PRC-013 2070-...