Search found 18 matches

by DarkCiv
Thu Jul 12, 2018 6:56 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: What am I doing wrong? Pressure tops only at 17 psi
Replies: 12
Views: 3565

Re: What am I doing wrong? Pressure tops only at 17 psi

Hello, Tonight I started to think outside the box, and tryied a different approach to my issue. As you know, My BP command tops at 17,9 psi, and dont let the engine develop better performance. So this time I tryied other things: Changed the laptop for the reflash, keep the pressure tables high enoug...
by DarkCiv
Wed Jul 11, 2018 10:17 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: What am I doing wrong? Pressure tops only at 17 psi
Replies: 12
Views: 3565

Re: What am I doing wrong? Pressure tops only at 17 psi

If flex fuel is not supported in your calibrations then you cannot use settings for flex fuel as you cannot run a flex fuel sensor. Exactly. It is not suported... I have Just imported the numbers of this calibrations. I copy the pressures tables and knock Air limit numbers of this flex calibration ...
by DarkCiv
Wed Jul 11, 2018 9:57 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: What am I doing wrong? Pressure tops only at 17 psi
Replies: 12
Views: 3565

Re: What am I doing wrong? Pressure tops only at 17 psi

what flex fuel calibration are you using? Looking at my software, Bazil calibration does not have flex fuel options Exactly... It does not have. I realized that for brazilian cars, there is only some basic calibrations. And, in fact, it is strange that our +3 psi and +6 psi have the same boost numb...
by DarkCiv
Wed Jul 11, 2018 9:47 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: What am I doing wrong? Pressure tops only at 17 psi
Replies: 12
Views: 3565

Re: What am I doing wrong? Pressure tops only at 17 psi

Yesterday I realized that flashing from PC is "different" from flashing from the FlashPro. But I made this steps. I always use the laptop. First of all, I took everythng to the car. laptop, cables and the FP. Started the laptop, plugued the FP on USB, and erased all of the calibrations on ...
by DarkCiv
Tue Jul 10, 2018 8:55 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: What am I doing wrong? Pressure tops only at 17 psi
Replies: 12
Views: 3565

Re: What am I doing wrong? Pressure tops only at 17 psi

But Jun, what about this 17 psi being there with a torque table of 350 Nm???

I am using one of your posts, when you have said that with 250 Nm, the pressures stays near 20 or 21 psi...

What can be happening?
by DarkCiv
Tue Jul 10, 2018 8:37 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: What am I doing wrong? Pressure tops only at 17 psi
Replies: 12
Views: 3565

Re: What am I doing wrong? Pressure tops only at 17 psi

Dear Spunkster, and Hondata friends I decided to took all of this night to test everything that I could on my flashpro, but nothing seems to work. My FP arrived about 2 weeks ago. A dealer from Brazil helped me and made the first reflash. He started with the +3 psi just to test, and it was ok. Then ...
by DarkCiv
Sat Jul 07, 2018 8:42 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: What am I doing wrong? Pressure tops only at 17 psi
Replies: 12
Views: 3565

Re: What am I doing wrong? Pressure tops only at 17 psi

Just to send more data: Ambient temperature were about 66/67 Fahrenheit during datalog. In EVERY datalog, L trim never gets different from - 100%. This is really strange!!! And this is not a new reflash... I have put about 800 miles in the car before this datalag, and using the atual calibration. Ca...
by DarkCiv
Sat Jul 07, 2018 8:25 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: What am I doing wrong? Pressure tops only at 17 psi
Replies: 12
Views: 3565

What am I doing wrong? Pressure tops only at 17 psi

Hi folks... I don´t know what I am doing wrong. On my datalogs, MAP stays around 17 psi, but on my Pressure tables, it shoud be near 21/22... I thought it was a problem of the Torque table, and rised it too, but it still stays at the same pressure. It is really strange, because when I first flashed ...
by DarkCiv
Mon Jun 25, 2018 9:22 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: About torque table and torque measurement
Replies: 5
Views: 2164

About torque table and torque measurement

Hi Hondata team and all stuff! I do not know if this is a dumb question... but I looked for it on the forum and I've never seen nobody asking for it. The point is: Assuming that there is a torque table inside the ECU (and it really does exist!), and that this torque table controls how much the throt...
by DarkCiv
Wed May 30, 2018 1:52 pm
Forum: FlashPro Manager
Topic: FlashPro Requests
Replies: 365
Views: 453402

Re: FlashPro Requests

Jun43 wrote: Wed May 30, 2018 10:11 am

That's cause your min/max sensor display isn't configured

Go to Option menu at the top then sensors then adjust each sensor according to your needs
Thanks you so much Jun!!! Really appreciated that tip!

I Will try adjusting this right now!
by DarkCiv
Wed May 30, 2018 9:53 am
Forum: FlashPro Manager
Topic: FlashPro Requests
Replies: 365
Views: 453402

Re: FlashPro Requests

Good Morning. I think that the Scales of the Advanced XY Graphs could be better appropriate. Last night, I was trying to learn how the civic x works, using other members datalogs, and comparing some sensors. Like Throttle position vs AirC, and RPM vs Boost, and I got this issue. Just for example, on...
by DarkCiv
Sun May 27, 2018 9:26 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Type of fuel, ECON mode and ECU Maps download?
Replies: 3
Views: 1843

Re: Type of fuel, ECON mode and ECU Maps download?

Hi Doug and all Hondata team!!! Finally, my car arrived this thursday. My ECU serial number is: 37820-5AA-M61 . It seems that since April this part number is accepted by FlashPro. I also ordered a FlashPro in may/11/2018 with a dealer here in my country... It seems that some problems happened during...
by DarkCiv
Sat May 26, 2018 8:14 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Tuning AFM FLOW
Replies: 9
Views: 8030

Re: Tuning AFM FLOW

Hi JJ! Listen, first of all I want you to know that I still don't have a FlasPro, ok! But I really like Graphs. The answer to you question above is yes, in my point of view . This would be my starting point, if your car was mine. But, I realized that your second graph is really better and smoother t...
by DarkCiv
Thu May 24, 2018 9:14 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Tuning AFM FLOW
Replies: 9
Views: 8030

Re: Tuning AFM FLOW

Sorry!!!

Where you read "k rpm", change It by "Volt". Like, 2.5 k rpm is 2.5 V.
My bad.
by DarkCiv
Thu May 24, 2018 9:00 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Tuning AFM FLOW
Replies: 9
Views: 8030

Re: Tuning AFM FLOW

Hi JJ! Based in what I researched about Short Trim last month, I think I can answer this one for you! First, you need to know basically that S. Trim is a "corrector" of your AFR. Based in the readings of your lambda sensor, It indicates If mixture is reach or lean. Let us supose that your ...