Search found 15 matches
- Thu May 31, 2018 9:18 am
- Forum: FlashPro Calibrations
- Topic: 2011 Si Short Ram Intake , cat back exhaust Calibration
- Replies: 1
- Views: 1382
Re: 2011 Si Short Ram Intake , cat back exhaust Calibration
Just use the SRI calibration.
- Wed May 30, 2018 5:04 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
Re: Speed Density Calibrations
Spunkster,
I appreciate all your help. Disabling it worked! Now I can start messing with the fuel at WOT from 6500 to Redline because the A/F ratio is between 16-20.
I appreciate all your help. Disabling it worked! Now I can start messing with the fuel at WOT from 6500 to Redline because the A/F ratio is between 16-20.
- Wed May 30, 2018 11:21 am
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
- Wed May 30, 2018 9:56 am
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
Re: Speed Density Calibrations
Any idea why this is happening?
- Wed May 23, 2018 6:27 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
Re: Speed Density Calibrations
I pulled over when this happened and just flashed the ecu with the standard settings of the original calibration where it uses the AFM. Everything is fine.
- Wed May 23, 2018 6:25 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
Re: Speed Density Calibrations
It sounds like you may not be uploading the actual file. instead of uploading that way, with the FlashPro connected to the pc, just click the upload arrow. Then take it to the vehicle. So I took my laptop with me this time and picked the same KN V2 SRI calibration, went into calibration and uncheck...
- Wed May 23, 2018 5:05 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
Re: Speed Density Calibrations
I'll give it a try and let you know.
- Wed May 23, 2018 4:42 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
Re: Speed Density Calibrations
Please give a step by step in exactly what you are clicking and how you are uploading. FlashPro already connected to PC 1. Select calibration 2. Click FlashPro Tab 3. When FlashPro window opens click Calibrations tab 4. Click Upload and calibration is uploaded in the primary calibration storage of ...
- Wed May 23, 2018 2:36 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
Re: Speed Density Calibrations
How are you uploading this calibration to the ECU? Are you just clicking on the upload button in the image you posted before? When I initially did it I uploaded the calibration to the FlashPro from my PC and then from the FlashPro to the vehicle. I did this last night and went on a test drive. Ever...
- Wed May 23, 2018 1:56 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
- Wed May 23, 2018 11:22 am
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
- Wed May 23, 2018 9:36 am
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
- Wed May 23, 2018 3:58 am
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
Re: Speed Density Calibrations
You may want to read more about this in the help file: https://www.hondata.com/help/flashpro/fuel_parameters.htm YOu do not need to change that setting unless you are trying to get it to run off of the AFM and the MAP sensor at the same time. So I read through the help file and what I did is unchec...
- Tue May 22, 2018 4:45 pm
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
Re: Speed Density Calibrations
The regular calibrations are AFM based, but you can change the settings so that they can be tuned via speed density. You can find this in the fuel section of the calibration window. So if I click the box with the red dot, how do I determine the value to put in the Minimum pressure for speed/density...
- Tue May 22, 2018 11:50 am
- Forum: Civic Si 2006-2011 Americas
- Topic: Speed Density Calibrations
- Replies: 29
- Views: 13047
Speed Density Calibrations
I was told to use Speed Density Calibrations with my intake that I have on my car. Are the calibrations that come standard in the software Speed Density Calibrations? I'm a newbie to this so don't kill me.