Search found 9 matches
- Wed Dec 21, 2005 9:21 am
- Forum: s300 / SManager
- Topic: S300 flashrom memory issue
- Replies: 2
- Views: 2729
- Sun Dec 18, 2005 10:11 pm
- Forum: s300 / SManager
- Topic: S300 flashrom memory issue
- Replies: 2
- Views: 2729
S300 flashrom memory issue
I was trying to datalog with my S300 today and run into some problems. When I open the download from ECU screen, it is showing all the memory is used. But under recordings, its blank with no saved files. And I don't have a way of recoverying the used up memory. Is this a firmware bug? How do I clear...
- Tue Sep 27, 2005 2:26 pm
- Forum: s300 / SManager
- Topic: SManager V1-1 Beta
- Replies: 84
- Views: 53614
- Wed Sep 21, 2005 11:21 am
- Forum: s300 / SManager
- Topic: Cold start
- Replies: 10
- Views: 6243
- Thu Sep 15, 2005 11:38 am
- Forum: s300 / SManager
- Topic: weird fuel cut when engine is cold
- Replies: 2
- Views: 4032
You may have changed the settings in the boost tab, or the water temp correction or the air temp correction. You may also have to adjust the idle with the IAC duty cycle slider. I am on a 7 lb spring, and cold boost and hot boost cut is set to 10 psi with Cold/Hot temp set at 141 degrees F. Water a...
- Wed Sep 14, 2005 9:06 pm
- Forum: s300 / SManager
- Topic: weird fuel cut when engine is cold
- Replies: 2
- Views: 4032
weird fuel cut when engine is cold
When I start my car, if I hit the gas before the temperature gauge reaches 1/3 of a way, the car would go into this werid fuel cut/funny idle mode until the engine is warmed up. The rpm would jump between 1000 and 1500, and if I rev the engine, my PLX M300 would register 19af or even leaner. I am ru...
- Fri Sep 02, 2005 8:20 pm
- Forum: s300 / SManager
- Topic: Questions for Hondata
- Replies: 10
- Views: 6880
- Thu Sep 01, 2005 5:31 pm
- Forum: s300 / SManager
- Topic: Questions for Hondata
- Replies: 10
- Views: 6880
You should be able to use the wideband as the primary sensor, but I personally have not yet tried this on my cars. Since I use the PLX it is much simpler to just use the narrowband output and send that signal to the stock o2 sensor inputs. if the stock o2 sensor input is getting the narrowband sign...
- Wed Aug 31, 2005 10:41 am
- Forum: s300 / SManager
- Topic: Is s300 working
- Replies: 42
- Views: 22349