Search found 17 matches

by boxer951
Mon May 28, 2018 9:36 pm
Forum: K-Pro Calibrations
Topic: 8th gen Civic Si K24A/A2 swapped need basemap help
Replies: 0
Views: 1885

8th gen Civic Si K24A/A2 swapped need basemap help

hey everyone.i wanted to see if anyone can help me with a basemap for my 8th gen Si.here are the current mods: JDM K24A/A2 K-tuned short ram intake Megan shorty header(4-1) Tsudo S2 70mm catback RBC intake manifold(inlet ported to 70mm) J37 Throttle body K20Z3 intake cam 50 VTC intake cam gear exedy...
by boxer951
Thu Apr 26, 2018 2:45 am
Forum: FlashPro Manager
Topic: flashpro update,now rpm needle does't move while flashing why?
Replies: 3
Views: 1177

Re: flashpro update,now rpm needle does't move while flashing why?

yes.i had a calibration open and it still wouldn't work,which is why i had to try it out using only the fp without the laptop.
by boxer951
Tue Apr 24, 2018 3:51 pm
Forum: FlashPro Manager
Topic: flashpro update,now rpm needle does't move while flashing why?
Replies: 3
Views: 1177

flashpro update,now rpm needle does't move while flashing why?

i updated my flashpro yesterday and now when i went to upload a calibration to my Fa5 civic,using the computer,it wouldn't allow me to.the upload button wasn't highlighted like it normally does,so it wouldn't allow me to upload.i then tried it without the laptop and it seemed to work but the rpm nee...
by boxer951
Fri Apr 06, 2018 4:11 pm
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

it's the skunk2 cai,header,exhaust MAP calibration.
by boxer951
Wed Apr 04, 2018 3:59 pm
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

it takes the usual amount of time,like 2-3 min.
by boxer951
Tue Apr 03, 2018 5:32 pm
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

no error codes that i can see.

so the rpm not moving while uploading cal to the car,isn't normal??
by boxer951
Mon Apr 02, 2018 5:20 pm
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

no,the VSA,ABS & HAND BRAKE lights are still on.
what could it be?

my other question is.is it normal for the RPM needle not to move when flashing/uploading a calibration to the car with the laptop? cuz it used to move while uploading before,with only the FP or FP & laptop.
by boxer951
Sun Apr 01, 2018 3:28 am
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

driver ✅ flashpro ✅ obdII ✅ ECU ✅ LOCKED🔒 sorry for the late reply.got so busy with work. but that is what it shows on the bottom left hand corner.☝️.and it still showing all the lights on my dash..vsa abs etc.. do you guys know what it could be? ALSO i ran into another BIGGER problem.my 08 Si is cu...
by boxer951
Sun Mar 18, 2018 1:08 am
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

well i checked the battery posts,hoping/🙏 that they were loose,but they weren't loose,so i still don't know what to do..can u guys somehow reset those lights through Hondata/flashpro?
by boxer951
Sat Mar 17, 2018 4:15 am
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

all of the lights stay on(VSA,ABS,TPM,CEL, when i turn the key to the on position and then the CEL will start to flash. like i said before,on flashpro manager,i got a pop up,saying the voltage was low & to charge battery soon.well i was reading on a forum where there's ppl with the same problem,...
by boxer951
Fri Mar 16, 2018 2:26 am
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

it says current software up to date 2.9.4.0 march 1 2018
by boxer951
Thu Mar 15, 2018 10:53 am
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

oh i been driving around past few days and the lights are still there.
by boxer951
Thu Mar 15, 2018 4:50 am
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

yes i turn off the ignition and then i restart the car.
by boxer951
Tue Mar 13, 2018 8:02 pm
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

ok,so i put it back to stock and the lights are still on.i remember before i uploaded the last calibration before the lights appeared,a warning sign popped up on my laptop saying that the battery voltage was low and that i need to charge the battery soon,not sure why that popped up,i figured it mean...
by boxer951
Tue Mar 13, 2018 5:26 pm
Forum: FlashPro Manager
Topic: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE
Replies: 22
Views: 5998

Re: VSA,ABS,BRAKE LIGHTS ALL ON AFTER BASE TUNE

i haven't tried it yet but as soon as i get home,i will try that.