Search found 11 matches
- Tue Sep 11, 2018 2:13 pm
- Forum: s300 / SManager
- Topic: idle issue
- Replies: 4
- Views: 995
Re: idle issue
I will have to try that and see what it shows
- Tue Sep 11, 2018 10:45 am
- Forum: s300 / SManager
- Topic: idle issue
- Replies: 4
- Views: 995
Re: idle issue
are you referring to the iacv being unplugged?
- Tue Sep 11, 2018 10:15 am
- Forum: s300 / SManager
- Topic: idle issue
- Replies: 4
- Views: 995
idle issue
i set the idle to 1100rpm on the s300 to help compensate for the ac kicking on, but for whatever reason it idles at 950 or 850
- Wed May 02, 2018 10:25 am
- Forum: Coil Pack Retrofit
- Topic: cpr wiring
- Replies: 2
- Views: 8125
Re: cpr wiring
thank you for the response
- Wed May 02, 2018 8:40 am
- Forum: Coil Pack Retrofit
- Topic: cpr wiring
- Replies: 2
- Views: 8125
cpr wiring
in the instructions it says to use a22 for the icm wire for the cpr kit, but in the diagram it shows to use a21, is there a difference or will either one work?
- Wed Apr 25, 2018 8:28 am
- Forum: Coil Pack Retrofit
- Topic: What exactly is needed in the dizzy after CPR conversion
- Replies: 10
- Views: 13136
Re: What exactly is needed in the dizzy after CPR conversion
Thank you for the response
- Fri Apr 20, 2018 7:53 pm
- Forum: Coil Pack Retrofit
- Topic: What exactly is needed in the dizzy after CPR conversion
- Replies: 10
- Views: 13136
Re: What exactly is needed in the dizzy after CPR conversion
Can the coil be removed from the dist.one of the wires will be hanging if removed, but if I leave the coil in then it could send spark to my billet cover
- Mon Nov 20, 2017 9:43 am
- Forum: s300 / SManager
- Topic: stumbling issue
- Replies: 6
- Views: 1609
Re: stumbling issue
I ran on open loop for a week and didn't have an issue, then I changed it to closed loop and the issue came back
- Mon Nov 13, 2017 10:53 pm
- Forum: s300 / SManager
- Topic: stumbling issue
- Replies: 6
- Views: 1609
Re: stumbling issue
I've actually been having this problem for awhile, but recently it has gotten worse, when I went to hook my computer to my ecu is when smanger updated, but I will definitely look into what your talking about, originally I thought it was my aftermarket tps but I'm starting to think it's the 02 sensor...
- Mon Nov 13, 2017 10:47 am
- Forum: s300 / SManager
- Topic: stumbling issue
- Replies: 6
- Views: 1609
Re: stumbling issue
Thank you for the info, I was starting to plan towards that after looking at it a bit longer, could I get ride of the factory 02 sensor and just run a wideband?
- Sun Nov 12, 2017 9:00 pm
- Forum: s300 / SManager
- Topic: stumbling issue
- Replies: 6
- Views: 1609
stumbling issue
ive been having issues with my car stumbling at times, I was able to catch it on a datalog, the problem happens at the 2 minute mark through the 2:20 mark. the car is a 95 civic with a b20 swap, running the hondata b20 base map. can anyone tell me what might be causing this issue