Search found 88 matches

by janemar
Wed Oct 05, 2022 6:18 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: No knock at WOT but high knock control at low rpm low load
Replies: 8
Views: 3574

Re: No knock at WOT but high knock control at low rpm low load

1. Yes, dont change the ignition tables just because of this issue. It will just ruin your response and fuel economybespecially at those low rpm/load. 2. I would suggest you play with the maf calibration. Try to richen or lean out your maf calibration on those rpm range. 1000-2000rpm. 3.i would not ...
by janemar
Tue Oct 04, 2022 6:50 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: No knock at WOT but high knock control at low rpm low load
Replies: 8
Views: 3574

Re: No knock at WOT but high knock control at low rpm low load

Its a bug. Some versions have it some dont.

Anyway, try switch back the MAF calibration to the default stock MAF sensor. Then observe if that will fox your low rpm/load knock issue
by janemar
Mon Mar 07, 2022 5:47 am
Forum: FlashPro Manager
Topic: Check Engine Light
Replies: 9
Views: 4544

Re: Check Engine Light

Hondata can only read ecm related CELs. So most problably you have issue which is non ecm/engine related like in transmission or abs, for example.
by janemar
Wed Dec 22, 2021 6:09 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: BUG of Flashpro
Replies: 10
Views: 1363

Re: BUG of Flashpro

Agree, I can see individual wheel speeds before in FP datalog. Most probably there is an issue after they did a version update thats why you cant view it anymore. Im sure hondata can read individual abs speed since they themselves use it in their traction control software. They cant simply claim ove...
by janemar
Sat Nov 13, 2021 7:27 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Battery problem ?
Replies: 3
Views: 903

Re: Battery problem ?

That is normal on all vehicle equipped with BMS.

Your ACC problem is a different story. Try to have it scanned at the dealer or shop with good code scanner. The hondata scanner will not read it since it only can access OBD and PCM.
by janemar
Thu Oct 21, 2021 5:33 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Rich S-Trim 2017+ High Output (91octane)
Replies: 6
Views: 1320

Re: Rich S-Trim 2017+ High Output (91octane)

You can play more to fix that s.trim region if you got plemty of time. If not, +/-5 is already good. Low rpms(2k below) and low loads(no boost/less 15% tps) wont destroy an engine even if you can hear a knock. This will only hurt your k.control/performace making it rise unnecessarily. There is a tab...
by janemar
Sun Sep 26, 2021 2:50 am
Forum: FlashPro Manager
Topic: FlashProManager 3.8.1
Replies: 29
Views: 4136

Re: FlashProManager 3.8.1

10th/11th gen Civic CVT Temp We've added the CVT temperature to the list of sensors for the 2016-2021 and 2022+ Civic CVT. Note that you will need to update your dash app to V1.6.0.0 or greater if you wish to display the temperature on the radio/navi. [/quote] Can you give me the previous dash app ...
by janemar
Fri Jul 09, 2021 7:45 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Fuel actual not following fuel cmd
Replies: 2
Views: 1344

Re: Fuel actual not following fuel cmd

Wild guess, AFM calibration is off.
by janemar
Thu Apr 15, 2021 3:23 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: High Knock Control?
Replies: 8
Views: 16587

Re: High Knock Control?

Its normal for the fuel youre using. When youve disabled the artificial knock. It only means it rises due to real knock at high RPMs. If its a slow rise. It means not too serious. If its abrupt, say from 60 to 110 in few sec during WOT, then theres a problem. Im assuming everything is good in your e...
by janemar
Wed Apr 14, 2021 10:08 pm
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: High Knock Control?
Replies: 8
Views: 16587

Re: High Knock Control?

Just tried out the 265kpa 93octane minimum tune. Very pleaseed with how she pulls and overall feels a lot more aggressive than the 6+psi tune. From what I heard, 265kpa is roughly 9+ psi which for a while only the MT civics were getting due to the limitations of the CVT. So is there any worry with ...
by janemar
Sun Mar 21, 2021 6:29 am
Forum: FlashPro Manager
Topic: FlashProManager 3.7.4
Replies: 9
Views: 2477

Re: FlashProManager 3.7.4

I can confirm this on my car too. 1.5T CVT.

For all who havent updated yet. Please stay put as this version is bugged
by janemar
Fri Feb 26, 2021 5:37 am
Forum: Civic 2016+ 1.5 Turbo Americas/Asia
Topic: Base Map Modifications Throttle
Replies: 6
Views: 1583

Re: Base Map Modifications Throttle

CVT and MT cars have separate throttle tables.

Basically, even though you turned ON improved response for MT on your CVT car, it is useless since it doesnt use this table.
by janemar
Fri Feb 19, 2021 9:10 am
Forum: FlashPro Manager
Topic: FlashProManager 3.7.2
Replies: 6
Views: 2726

Re: FlashProManager 3.7.2

Hondata wrote: Fri Feb 19, 2021 9:02 am The 'artificial' knock control will rise at 5500 rpm and then fall back to the same level. What you're seeing is from the ECU seeing noise on the knock sensor.
Thanks! I will have to play with my knock sensitivity tables then or fill up with a fresh set of gas. Car/gas been stuck for a month.
by janemar
Fri Feb 19, 2021 3:23 am
Forum: FlashPro Manager
Topic: FlashProManager 3.7.2
Replies: 6
Views: 2726

Re: FlashProManager 3.7.2

Coming from 3.6.8 with Artificial Knock Disabled. Everything is good then. I could say this is the best mod for any 1.5T users. You can really feel the added power up top and cooler engine temps. Knock control wont budge even after doing topspeed runs! Same everything and JUST AFTER updating to 3.7....
by janemar
Sun Jan 10, 2021 9:57 am
Forum: FlashPro Manager
Topic: FlashProManager V3.6.9
Replies: 12
Views: 2844

Re: FlashProManager V3.6.9

Hondata wrote: Sun Jan 10, 2021 8:25 am fujinz: post the datalog

janemar: knock sensitivity and boost by gear quick select. Not knock sensitivity quick select and boost by gear quick select.
It's not new then, I recalled I already have knock sensitivity tables on the version 3.6.7