Search found 4 matches

by 90_AcuraB16
Thu Aug 31, 2017 1:15 pm
Forum: S300 Calibrations
Topic: B16A Turbo leaning out at idle
Replies: 5
Views: 1381

Re: B16A Turbo leaning out at idle

I agree that in order to set the timing perfect i need a timing light, However, I feel that the timing is close enough at this point that we can rule it out as being the culprit for the random leaning out at idle, as well as the possible cause for overheating. I can however post a couple data logs t...
by 90_AcuraB16
Thu Aug 31, 2017 10:26 am
Forum: S300 Calibrations
Topic: B16A Turbo leaning out at idle
Replies: 5
Views: 1381

Re: B16A Turbo leaning out at idle

Fix the obvious faults before chasing anything else - if the battery voltage is jumping around, remove and clean all grounds, make sure the valve cover ground is in the right place, check electrical connectors for dirt & wear, check fuse box for bad connections - if there is a CEL, get the code - ch...
by 90_AcuraB16
Wed Aug 30, 2017 4:59 pm
Forum: S300 Calibrations
Topic: B16A Turbo leaning out at idle
Replies: 5
Views: 1381

Re: B16A Turbo leaning out at idle

Please forgive me if this is the wrong section, please remove or move, if not allowed. this is a tuning related question.
by 90_AcuraB16
Wed Aug 30, 2017 4:50 pm
Forum: S300 Calibrations
Topic: B16A Turbo leaning out at idle
Replies: 5
Views: 1381

B16A Turbo leaning out at idle

Hi there, I'll start with mods and engine and then get into what my issue is. B16A series 1 (5000 series) Stock internals 10.5:1 compression Stock intake manifold Stock fuel rail Stock FPR Stock Map Stock cams 255LPH fuel pump 70mm Throttle body (BBK) S300 (V1?) AEM wide band Auto meter fuel pressur...