Search found 10 matches

by bixer
Sat Sep 09, 2017 5:27 am
Forum: FlashPro Manager
Topic: Knock control value
Replies: 9
Views: 2976

Re: Knock control value

that knock control is a joke.
by bixer
Sat Sep 02, 2017 3:23 am
Forum: FlashPro Manager
Topic: How can I get column 10 activated on fuel table
Replies: 6
Views: 1911

Re: How can I get column 10 activated on fuel table

on NA engine , too large throttle plate will decrease the air flow velocity and this will further decrease low end torque by geopartizing the valve overlap in that area.
by bixer
Wed Aug 30, 2017 11:52 pm
Forum: FlashPro Manager
Topic: Ignition / knock control
Replies: 9
Views: 5261

Re: Ignition / knock control

yes I know. increasing the knock sensor sensitivity will do it also.
by bixer
Wed Aug 30, 2017 11:23 am
Forum: FlashPro Manager
Topic: FlashPro Requests
Replies: 365
Views: 456051

Re: FlashPro Requests

it`s possible to implement this target lambda feature (like on kpro4)?


Image
by bixer
Sun Aug 27, 2017 5:10 am
Forum: FlashPro Manager
Topic: Windows 10 wont recognize hondata
Replies: 2
Views: 1461

Re: Windows 10 wont recognize hondata

shift+restart , 7 disable driver signature enforcement
by bixer
Fri Aug 25, 2017 11:47 pm
Forum: FlashPro Manager
Topic: Ignition / knock control
Replies: 9
Views: 5261

Re: Ignition / knock control

thanks mate, car is already tuned , I just wanted to know why the 55% kcontrol remains with the system disabled. usually I get noise from the cams and headers and I don`t want to use this feature. If I suspect real knock I will use stand alone knock detection. on kpro it works ok, but that`s another...
by bixer
Thu Aug 24, 2017 12:04 pm
Forum: FlashPro Manager
Topic: Ignition / knock control
Replies: 9
Views: 5261

Re: Ignition / knock control

ok, I "tested" the car with 60 values on ign limit tables (this is a remote test...) the kcontrol is still 55%. The ignition values are following the tables , the ign limit is arround 65 deg. I wonder if that 55% value have some influence on the ignition by retarding it without showing it ...
by bixer
Tue Aug 22, 2017 7:15 am
Forum: FlashPro Manager
Topic: Ignition / knock control
Replies: 9
Views: 5261

Re: Ignition / knock control

yes, "normal" idle is arround 2 - 3 columns , I just highlighted a bigger area of hi values ign for fast idle too.
by bixer
Tue Aug 22, 2017 2:54 am
Forum: FlashPro Manager
Topic: Ignition / knock control
Replies: 9
Views: 5261

Re: Ignition / knock control

thanks for the info mate! yes that I intend, to disable the knock control logic, so I put 0 in the limit low and high & knock retard tables. I also was thinking using / testing with 60 (instead of 0) as you suggest, but I tested with 0 first. many thanks mate! here is a test log / 3-rd pull with...
by bixer
Tue Aug 22, 2017 1:10 am
Forum: FlashPro Manager
Topic: Ignition / knock control
Replies: 9
Views: 5261

Ignition / knock control

hello , please I need an info. by using 0 values in the knock ign limit & knock retard tables will "disable" them, right?

(this is for a race setup so also the knock sensitivity is reduced)