Search found 10 matches
- Sat Sep 09, 2017 5:27 am
- Forum: FlashPro Manager
- Topic: Knock control value
- Replies: 9
- Views: 3019
Re: Knock control value
that knock control is a joke.
- Sat Sep 02, 2017 3:23 am
- Forum: FlashPro Manager
- Topic: How can I get column 10 activated on fuel table
- Replies: 6
- Views: 1953
Re: How can I get column 10 activated on fuel table
on NA engine , too large throttle plate will decrease the air flow velocity and this will further decrease low end torque by geopartizing the valve overlap in that area.
- Wed Aug 30, 2017 11:52 pm
- Forum: FlashPro Manager
- Topic: Ignition / knock control
- Replies: 9
- Views: 5360
Re: Ignition / knock control
yes I know. increasing the knock sensor sensitivity will do it also.
- Wed Aug 30, 2017 11:23 am
- Forum: FlashPro Manager
- Topic: FlashPro Requests
- Replies: 367
- Views: 504706
Re: FlashPro Requests
it`s possible to implement this target lambda feature (like on kpro4)?
- Sun Aug 27, 2017 5:10 am
- Forum: FlashPro Manager
- Topic: Windows 10 wont recognize hondata
- Replies: 2
- Views: 1484
Re: Windows 10 wont recognize hondata
shift+restart , 7 disable driver signature enforcement
- Fri Aug 25, 2017 11:47 pm
- Forum: FlashPro Manager
- Topic: Ignition / knock control
- Replies: 9
- Views: 5360
Re: Ignition / knock control
thanks mate, car is already tuned , I just wanted to know why the 55% kcontrol remains with the system disabled. usually I get noise from the cams and headers and I don`t want to use this feature. If I suspect real knock I will use stand alone knock detection. on kpro it works ok, but that`s another...
- Thu Aug 24, 2017 12:04 pm
- Forum: FlashPro Manager
- Topic: Ignition / knock control
- Replies: 9
- Views: 5360
Re: Ignition / knock control
ok, I "tested" the car with 60 values on ign limit tables (this is a remote test...) the kcontrol is still 55%. The ignition values are following the tables , the ign limit is arround 65 deg. I wonder if that 55% value have some influence on the ignition by retarding it without showing it ...
- Tue Aug 22, 2017 7:15 am
- Forum: FlashPro Manager
- Topic: Ignition / knock control
- Replies: 9
- Views: 5360
Re: Ignition / knock control
yes, "normal" idle is arround 2 - 3 columns , I just highlighted a bigger area of hi values ign for fast idle too.
- Tue Aug 22, 2017 2:54 am
- Forum: FlashPro Manager
- Topic: Ignition / knock control
- Replies: 9
- Views: 5360
Re: Ignition / knock control
thanks for the info mate! yes that I intend, to disable the knock control logic, so I put 0 in the limit low and high & knock retard tables. I also was thinking using / testing with 60 (instead of 0) as you suggest, but I tested with 0 first. many thanks mate! here is a test log / 3-rd pull with...
- Tue Aug 22, 2017 1:10 am
- Forum: FlashPro Manager
- Topic: Ignition / knock control
- Replies: 9
- Views: 5360
Ignition / knock control
hello , please I need an info. by using 0 values in the knock ign limit & knock retard tables will "disable" them, right?
(this is for a race setup so also the knock sensitivity is reduced)
(this is for a race setup so also the knock sensitivity is reduced)