I'll be fitting a roll cage with no dashboard.
The stock cluster is a bit of a odd shape to fit onto the the cage structure too.
Currently have an OBD2 smaller compact dash with sequential shift light.
Search found 50 matches
- Thu Apr 18, 2024 6:02 pm
- Forum: K-Pro / KManager
- Topic: Removing RSX/DC5 stock cluster/dash with Kpro-V4.
- Replies: 2
- Views: 56
- Tue Apr 09, 2024 6:36 pm
- Forum: K-Pro / KManager
- Topic: Removing RSX/DC5 stock cluster/dash with Kpro-V4.
- Replies: 2
- Views: 56
Removing RSX/DC5 stock cluster/dash with Kpro-V4.
Hi Hondata,
I am planning to remove my stock gauge cluster on my DC5. Currently it has a perfectly running Hondata Kpro V4.
What are the parameters I need to reconfigure in the Kmanager so it will function as per normal?
I am planning to remove my stock gauge cluster on my DC5. Currently it has a perfectly running Hondata Kpro V4.
What are the parameters I need to reconfigure in the Kmanager so it will function as per normal?
- Sat Mar 05, 2022 5:45 pm
- Forum: K-Pro / KManager
- Topic: K20A IACV Delete
- Replies: 3
- Views: 1859
Re: K20A IACV Delete
It’s a circuit car and only live it’s life on the track. The IACV stuck open during the last track day. We tried to free the spindle up with carb cleaner spray but it just stuck open. We had to use duct tape to made temporary gasket to temporarily seal off the IACV. Just want to simplify the engine ...
- Thu Mar 03, 2022 6:57 pm
- Forum: K-Pro / KManager
- Topic: K20A IACV Delete
- Replies: 3
- Views: 1859
K20A IACV Delete
Hi Hondata,
Is there a need to disable IACV in Hondata if I were to delete the IAC Valve?
Will simply unplug the IACV connector at the valve throw a CEL?
It's a KPRO V4 on PND.
Thank you.
Is there a need to disable IACV in Hondata if I were to delete the IAC Valve?
Will simply unplug the IACV connector at the valve throw a CEL?
It's a KPRO V4 on PND.
Thank you.
- Thu Jul 30, 2020 1:27 am
- Forum: K-Pro / KManager
- Topic: Hondata Kpro4 E31 - MIL for external shiftlight
- Replies: 1
- Views: 1593
Hondata Kpro4 E31 - MIL for external shiftlight
Hi Hondata
I am planning to wire an external shiftlight and use E31 MIL as trigger.
Can I just wire it as photo shown?
I am planning to wire an external shiftlight and use E31 MIL as trigger.
Can I just wire it as photo shown?
- Tue Jan 07, 2020 6:09 am
- Forum: K-Pro / KManager
- Topic: Is OBDII Port still available after Kpro4 installed?
- Replies: 1
- Views: 750
Is OBDII Port still available after Kpro4 installed?
Hello Is OBDII Port still available after Kpro4 on installed on PND ECU? I am trying to capture some engine datas to overlay it on Track Addict Lap timer app. Is there any other existing video capture capable iOS app that can connect to Kpro4 via Bluetooth that works much like the older discontinued...
- Sun May 05, 2019 5:22 am
- Forum: K-Pro / KManager
- Topic: Merge / Cascade datalog onto video
- Replies: 0
- Views: 3420
Merge / Cascade datalog onto video
Hi all,
Has anyone know how to merge / cascade datalog onto a video, something like hondatalogger did back in the day on a Kpro4?
https://www.hondata.com/?_route_=hondalogger
Has anyone know how to merge / cascade datalog onto a video, something like hondatalogger did back in the day on a Kpro4?
https://www.hondata.com/?_route_=hondalogger
- Fri Apr 05, 2019 1:24 am
- Forum: Hondata Mobile
- Topic: Android applications
- Replies: 31
- Views: 64777
Re: Android applications
Is there anyway to change the units on the Mobile App?
Also, can we choose what gauges to be displayed and layout?
Also, can we choose what gauges to be displayed and layout?
- Tue Feb 05, 2019 8:52 pm
- Forum: K-Pro / KManager
- Topic: DSG TRANSMISSION FOR HONDA!
- Replies: 25
- Views: 22718
Re: DSG TRANSMISSION FOR HONDA!
Great idea..
But we need to know a lot more insight of what's involved.. few photos will be helpful...
But we need to know a lot more insight of what's involved.. few photos will be helpful...
- Sun Jan 27, 2019 2:44 am
- Forum: K-Pro / KManager
- Topic: Unable to download the current calibration on ECU
- Replies: 5
- Views: 2231
Re: Unable to download the current calibration on ECU
Hi Spunkster/Hondata I've since upgraded the kmanager software to 4.3.6.0 on my laptop. Still the same, no improvement. I can make changes to calibration file, and uploaded it to kpro4, no error was found. I know the upload was successful as I was changing the idle from 750rpm to 1000rpm and yes it ...
- Mon Jan 21, 2019 4:29 pm
- Forum: K-Pro / KManager
- Topic: Unable to download the current calibration on ECU
- Replies: 5
- Views: 2231
Re: Unable to download the current calibration on ECU
Hi Spunkster,
It's Kpro V4.
- serial number K-Pro : 45741
- version of software being used (from Help, About): 4.3.4.0
It's Kpro V4.
- serial number K-Pro : 45741
- version of software being used (from Help, About): 4.3.4.0
- Mon Jan 21, 2019 1:06 am
- Forum: K-Pro / KManager
- Topic: Unable to download the current calibration on ECU
- Replies: 5
- Views: 2231
Unable to download the current calibration on ECU
Hi Hondata, It seems like I am unable to download the existing calibration that is on my ECU. No error appears when I click "Download". It looks like Kmanager downloaded calibration that is same as stock PND Base calibration. Obviously I have changed a lot of the parameters such as B21 Boo...
- Thu Jan 03, 2019 9:02 pm
- Forum: K-Pro Calibrations
- Topic: K24A2 Turbo charged MAP
- Replies: 0
- Views: 3229
K24A2 Turbo charged MAP
Hi guys,
Anyone has a dyno tuned map for K24A2 that willing to share?
Need a resonable tuned map to start with.
Thanks
Anyone has a dyno tuned map for K24A2 that willing to share?
Need a resonable tuned map to start with.
Thanks
- Sun Oct 14, 2018 7:26 pm
- Forum: K-Pro Calibrations
- Topic: K24A3 using PND-V4 and 5 speed
- Replies: 1
- Views: 1820
K24A3 using PND-V4 and 5 speed
Hi Hondata, I have recently swapped a K24A3 into my RSX Base with 5 speed transmission. Everything were transferred over from K20A3 to the K24A3 (everything on PRB intake manifold, knock sensor and coolant temp sensor, and crank angle sensor). Do I need to change anything else apart from enrichment ...
- Tue Sep 18, 2018 1:06 am
- Forum: K-Pro / KManager
- Topic: Can 02-04 PND Kpro4 works with 05-06 Type S Gearbox?
- Replies: 3
- Views: 1208
Re: Can 02-04 PND Kpro4 works with 05-06 Type S Gearbox?
So is it just the calibration file that need to be configured? under which section changes need to be made to the calibration file?
Thanks
Thanks