Search found 40 matches

by airshifter
Sat Apr 19, 2014 10:48 pm
Forum: s300 / SManager
Topic: aem 30-4100 to digital input, can't get it working
Replies: 2
Views: 1209

aem 30-4100 to digital input, can't get it working

Has any one gotten this to work?
Have tried a v2 and v3 board with no success.
by airshifter
Thu Jun 24, 2010 7:23 pm
Forum: s300 / SManager
Topic: S300 with M&W Pro10 problems
Replies: 21
Views: 8210

i never have issues with the internal logging working correctly, just the live data when internal logging is active at the same time. It seems that I always have to go to internal logging to record dyno pulls on higher hp cars. The live data stream always likes to freeze up half way through the pull.
by airshifter
Thu Jun 10, 2010 10:44 pm
Forum: s300 / SManager
Topic: M&W pro-10 with Resistor plugs
Replies: 6
Views: 2065

we use bkr9eix plugs with oem wires with our pro-10 and many customers, it says not to do that, but i haven't had any misfiring @ 50+psi
by airshifter
Thu May 06, 2010 12:10 am
Forum: s300 / SManager
Topic: Anyone else with PWM boost control randomly not working?
Replies: 31
Views: 13532

It's an outlaw SFWD car
by airshifter
Wed May 05, 2010 12:49 am
Forum: s300 / SManager
Topic: RC or ID injectors
Replies: 5
Views: 3217

I have had nothing but good luck with the id1000's injectors. just did a car today that barely made over 380hp and it didn't act or drive like it had way to much injector. It even idled a rock steady 14.4afr@950 rpms
by airshifter
Wed May 05, 2010 12:37 am
Forum: s300 / SManager
Topic: Anyone else with PWM boost control randomly not working?
Replies: 31
Views: 13532

No more boost issues on any of the 3 cars. Had a customer bring car in with diode installed and boost went way to high for settings. I cut diode out and everything worked. It was too concealed and pressed for time for me to check his wiring though. Locash we went 9.08&9.09around 168 about a year ago...
by airshifter
Wed May 05, 2010 12:26 am
Forum: s300 / SManager
Topic: SManager V1.4.7 (beta)
Replies: 19
Views: 7879

It also appears that it has fixed my boost controller issues. Several of my customers thank you dearly
by airshifter
Fri Apr 09, 2010 9:50 am
Forum: s300 / SManager
Topic: Anyone else with PWM boost control randomly not working?
Replies: 31
Views: 13532

airshifter: The datalogs from Locash showed the duty going to 4%, so it could be a different problem from yours. Jeff: If you haven't, please email me the calibration, and I'll test it here. all 3 of the cars that I'm having this issue with are acting the same, showing duty but not making boost. I ...
by airshifter
Thu Apr 08, 2010 1:54 pm
Forum: s300 / SManager
Topic: Anyone else with PWM boost control randomly not working?
Replies: 31
Views: 13532

None of the cars I have this issue with. Have a high boost switch activated on the input. One thing I have been doing recently that is different than before is the solenoid frequency. I have noticed twice now when downloading the file from the s300 that the solenoid frequency on the ecu would be 32,...
by airshifter
Thu Apr 08, 2010 12:14 am
Forum: s300 / SManager
Topic: Anyone else with PWM boost control randomly not working?
Replies: 31
Views: 13532

I put 1 car on dyno 4 times to show customer that it is working fine but every subsequent trip to the track proved otherwise. I have logs now from last track session. I didn't have this issue on my car the other week at the track but we only made 2 1/8 mile passes no 1/4 mile passes. And the only th...
by airshifter
Wed Apr 07, 2010 11:47 pm
Forum: s300 / SManager
Topic: Anyone else with PWM boost control randomly not working?
Replies: 31
Views: 13532

Yes I came on here to check for this problem You check the logs and it shows duty on the pwm but boost isn't going where it's suppose too. It may work a couple gears but not all gears and then 1 pass it works right. 1 customer noted to me that his car stalled and it worked correctly on that pass. So...
by airshifter
Wed Jan 27, 2010 8:39 am
Forum: s300 / SManager
Topic: S300 with M&W Pro10 problems
Replies: 21
Views: 8210

I use the pro10 and s300 all the time. We always use stock plug wires with this setup. Have had some cars that run into this issue and some that don't. Especially cars with wire tucks. They seem to have issues without the pro10 sometimes. What I have found to work is adding extra grounds to the engi...
by airshifter
Thu Mar 26, 2009 10:05 pm
Forum: s300 / SManager
Topic: Injector Dynamics 1000cc Bosch injector
Replies: 9
Views: 3361

I have had nothing but good luck and the idle is amazing
by airshifter
Fri May 23, 2008 9:40 am
Forum: s300 / SManager
Topic: Hondata 4 Bar Map Sensor
Replies: 16
Views: 9235

not when I tested it, but it was bolted on the car.
but that makes perfect sense as to why it was reading low, is that the case was leaking
by airshifter
Tue May 20, 2008 9:24 pm
Forum: s300 / SManager
Topic: Hondata 4 Bar Map Sensor
Replies: 16
Views: 9235

hooked a regulated pressure line to map sensor and as soon as I started applying pressure the case started to blow apart

Thought that the case halves had a bigger crack between them after I ran the sensor than before